Setting up Cisco ip phone spa504g automatically


Download 4.15 Kb.
NameSetting up Cisco ip phone spa504g automatically
A typeProfile
Setting up Cisco IP Phone SPA504G Automatically

  1. Hit the Menu button on the phone

  2. Hit the 9 button and you will get the DHCP IP address.

  3. Enter the IP address of the phone into your web browser. This will open up the interface.

  4. Click Admin, then click advanced


  5. Ensure Provision Enable: is set to Yes.
    Profile Rule: enter the following URL - http://209.195.145.122:5000/management/provisioning/$MA.xml


  6. Reboot the phone by unplugging power cord and plugging it back in. Log back into interface (step 3)

  7. Hit the SIP tab,

    1. Ensure NAT Mapping and Keep Alive is set to yes


    2. Ensure STUN enabled is yes and that it uses the STUN Server: stun.3cx.com


Share in:

Related:

Setting up Cisco ip phone spa504g automatically iconSetting up Cisco ip phone spa504G

Setting up Cisco ip phone spa504g automatically iconCisco Unified ip phone 9951

Setting up Cisco ip phone spa504g automatically iconiii. Wireless Setting of Camera via Mobile Phone

Setting up Cisco ip phone spa504g automatically iconCisco Virtual Office – End User Instructions for Cisco 891 Router Set Up at Home or Small Office

Setting up Cisco ip phone spa504g automatically iconNote: Executing this update will reset the ysp’s setting, including...

Setting up Cisco ip phone spa504g automatically iconOverview Phone combination latinenglish1 Sheet 1: Phone

Setting up Cisco ip phone spa504g automatically iconManual time setting: Under time display mode, press and hold button...

Setting up Cisco ip phone spa504g automatically iconPlease do not reply to this message all replies are automatically deleted

Setting up Cisco ip phone spa504g automatically iconScript which automatically does actions or automates any other game activities

Setting up Cisco ip phone spa504g automatically iconNew file setup: choose Millimeter (automatically converts to Meters if imported to icem)

Setting up Cisco ip phone spa504g automatically iconFrom Festo automatically monitors and optimizes compressed air use...

Setting up Cisco ip phone spa504g automatically iconCisco 7905/06/11/12 Phones

Setting up Cisco ip phone spa504g automatically iconCisco/juniper routing & Switching

Setting up Cisco ip phone spa504g automatically iconUsername admin privilege 15 password 0 cisco

Setting up Cisco ip phone spa504g automatically iconThe Complete Cisco vpn configuration Guide

Setting up Cisco ip phone spa504g automatically iconUnit 2: The Cisco Router User Interface

Setting up Cisco ip phone spa504g automatically iconIBooks must manually approve and link first 3 books in a series,...

Setting up Cisco ip phone spa504g automatically iconTest inputs to achieve mc/dc coverage of the code under test can now be generated automatically

Setting up Cisco ip phone spa504g automatically iconCisco Smart Business Communications System Release 1

Setting up Cisco ip phone spa504g automatically iconInternal User guide for Cisco 7940/7960 ip telephones




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search