Any time of the day or night if you're in your gmc




Download 486.31 Kb.
NameAny time of the day or night if you're in your gmc
page1/8
A typeDocumentation
  1   2   3   4   5   6   7   8
GMC MOTORHOME ASSIST LISTING

aka the BLACK LIST

October 22, 2018

Any time of the day or night if you're in your GMC -Mike Beaton

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

GMC’ERS WHO TOOK THEIR LAST RIDE ONTO THE HIGH ROAD.

Ted Schurman - Dunn Loring, VA 1999 Bob McCarthy - Lillian, AL 2000

Jim Penrod - Lake Placid, FL 2001 Lanier Foote - Jackson, MS 2001

Dick Kennedy - IN 2001 Robert Craghead IL 2003

Loren "Skip" Newhouse MD 2004

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

ALABAMA

Curtis E. Comer 118 Easy Street Hazel Green, AL 35750-8815 N AL near TN border and I-65 BEARING TOOL I have a pretty complete set of shop tools. I try to do my own work on all my vehicles, so I don't know any reputable mechanics locally. I am happy to assist any GMC’ers in my area who are in need. (256) 828-1282 home phone (256) 883-7000 work (256) 603-4514

Cell (256) 883-1525 fax curtcomer@aol.com

---------------------------------

Fellows, Hugh Sr. 744 E. Samford Auburn, AL 36830 Have jacks, tools, and manuals (334)-826-2498

--------------------------------
Hugh Fellows Jr. 2330 Wrights Mill Rd. Auburn, AL 36830 Have jacks ,tools, Manuals & BEARING TOOL (334)-821-7198

------------------------------------

Dan and Glenda Long Rogersville, Alabama Northwest Alabama on the Tennessee River Covered Building with electric Some Knowledge on the basics 256-247-0579

----------------

ALASKA

Kerry L Bromley 1370 Lk. Lucille Dr. Wasilla, Alaska 99654 I would be happy to help in anyway I can. I have quite a few tools and capable of welding repairs. I am only home half of the month. I might just like a visit if you got the time. I have a circle drive and a place to get out of the rain if needed. If I don't answer the phone try e-mail. 76 Royale 907-373-6417 kbromley_45@yahoo.com

-----------------------

Jim Bourbonnais I have local knowledge ( 40 years in Anchorage ), retired aircraft mechanic and a 5 year owner of a 1976 Edgemont and am much more familiar with the GMC than I ever wanted to be. I can be reached: (907) 243-4155 fax; (907) 243-4266 cell, (907) 301-9921 gympat@gci.net

---------------------------------

ARIZONA

John Alexander 1525 N. 71st St. Mesa, AZ 85207. I live in the Phoenix Metro area. I am a newcomer to the GMC, but have jumped in with both feet. Have two GMC's in need of TLC as well as SOB. '73 and '74 Painted Deserts. Have room to work (3 Acres), Tools, Water, Power, Dump. Have two neighbors with GMC's also. jvalexand@aol.com
Home: (480) 981-5090 Work: (480) 891-6631 Pager: (602) 656-7078 Cellular: (602) 509-3100

------------------------------------------

Ronald E. & Regina M. Sumandal And the Pumpkin-Rose 4901 Courtney Bay Fort Mohave, AZ. 86426 Can assist from Needles Ca. to Laughlin NV. Hey that’s three States, Don't know if I'd be much help, but got an ear. Have some cheap (retired with no money) tools if I can find ‘em, Which the scars on my hands can attest too and have shade tree mechanical skills to do some work and willing to jump in and help if needed. Have coffee, soda and maybe beer<-(gotta ask boss) and can always put something together to eat. 20amp service, dump and space to park and work, No shade 520-758-5352

-----------------------------

Tom Bradley, 3016 W. Ironwood Circle, Chandler, AZ. Own GMC and have 30 amp service available. Lots of contacts to help out other GMC'ers. Phone 480-814-1631 E-Mail marisco12@cox.net.

------------------------------------------

Leland (Lee) L Garland 561 W Casa Mirage Dr Casa Grande, AZ 85222 I don't have a lot of facilities to offer other than tools and a pretty good knowledge of the Phoenix metropolitan area. This includes parts houses and wrecking yards. I do have a pretty good collection of hand tools -- 3/4 inch drive breaker bar and sockets or lug nuts and front axle nuts as well as the BEARING TOOL. phone: 520-876-9554 cell phone: 480-540-1315 email address: lgarland@c2i2.com
--------------------------

Fred Estabrook 4665 N Thistle Drive, Florence, AZ 85232 Location is 11 miles south of Florence AZ, mid way between Tuscon and Phoenix on highway 79. Have 2 1/2 acres on the Sonoran Desert with hookup. Own a 76 Eleganza and can provide limited tools and tech advice. phone 520 868-5492

----------------------------

Rick Zodrow Prescott, AZ I am not a mechanic but could be a good "port in the storm" if your having problem in the Prescott, Arizona area. Call me if your having questions or problems. 928-541-9693-

----------------------

David Greenberg 5977 Calle Almendra Hereford, AZ 85615 We are 40 miles south of I10 about an hour from Tucson. Basic mechanical knowledge includes patching stuff up well enough to get to the next mechanic. My local guy is very good (can do a carb rebuild in 15 minutes) , but not too fast on the big jobs (engine rebuilding, etc takes weeks) I have a small welder, air tools, jacks and stands and can help with electrical and plumbing problems. I don't have much parking space available, due to a large number of projects going on. 520 378 9380 landman11@mindspring.com www.azlandman.com

---------------------------------------------

Don G Claar 141 Keywester Lake Havasu. AZ 77 Palm Beach with 403 (2nd unit- 1st 76 Eleganza) not an expert but have some knowledge and a great desire to help fellow GMC’ers. And knowledge of who and not to have work on your GMC in this area. 928-453-1597

----------------------------------------------

Bill and Sharon Nigh, Buckeye, Arizona. 25 miles West on I-10 from Phoenix. Love the magnificent GMC Motorhome, devoted to their preservation, enhancement and protection. Our Company builds heavy machinery, so have full machine shop. New at GMC intricacies, but we repair our own cars, so are fast learners. Willing to possibly help with some repairs. Also have friend who repairs vehicles in Buckeye, that would probably be available also. At the very least pet our cats, two dogs and jump in the pool! Sharon is Gourmet cook and would serve you hot Espresso and cake! (623) 386-6144 or Fax (623)386-6617.

----------------------------------------

George Castleberry Flagstaff, AZ I have assorted automotive tools including compressor, bead blast cabinet, engine hoist. I don't have any GMC specific tools. I can squeeze one more GMC onto the driveway and have water & electric hookups. New to GMC's so not a lot of useful knowledge. I am only a mile off of Interstate 40 in Flagstaff. 928-527-9989

------------------------------

Steve Russell/Bernice Marks 5937 East Aster Drive Scottsdale, Arizona 85254-4335 We have a 77 Coca Cola and are located in the Northeast part of Phoenix on the Scottsdale border. We have a driveway, 40 Amp electrical hookup, and dumping ability. I have a lot of automotive tools, jacks, stands, air compressor, welders and some metal working tools, and have worked on cars and vans for many years. I'm still learning about the GMC and fixing up mine as we use it. Call any time, if we don't want to be disturbed, we won't
answer the phone, but we do check messages very frequently. 480-991-0624 Home 602 524-0063 Cell
srussell108@cox.net

-----------------------------------

Bruce and Elizabeth Tara 1829 E. Mineral Road Gilbert, AZ 85234 I will offer any assistance I can. I have a fair to meddling mechanical ability. Tons of tools, though not all GMC specialty tools. Lots of moral support. 480-507-1902 voice 480-507-1907 fax bnetara@grandecom.net

------------------------
Steve & Gail Ault. Winters Green Valley AZ. Have parking for one - two rigs Summers at US85 at WY/CO border - south of Cheyenne, WY Snail Mail (Highway 85, Carr, CO 80612) Parking for a half dozen rigs, 20 amp service for one or two, water, 8 miles to free dump station. Air tools and compressor, welder, engine puller. SKPs and GMC’ers come visit - coffee's always hot. Cell Phone: (520)603-5342 stevengail@hotmail.com

------------------------

Christopher Choffat 4322 N. 86th Place Scottsdale, AZ 85251 I am located in South Scottsdale just off the101 Freeway at East Indian School Rd, about four miles north of the 202 Freeway, on the eastern leg. The 101 is a valley-wide loop that connects to I-17 and I-10. I am also near Arizona 87 which is a popular mountain access highway. I am a GMC newbie since 2003, but have mechanical and electrical aptitude and
will help in any way that I can. I can offer a place to park, 110V, 20 A plug in (for now, 50 A later.) in my NON- HOA neighborhood, and help in finding local parts and service for your GMC. There is also an RV
friendly Wal mart about a half mile north of me. There is a gas station with RV dump and Propane filling just off my freeway exit, and an RV friendly Casino just a few exits down. I travel for business from time
to time, but the number is my cell phone, so if I'm not available, I'll help you find somebody who is
602-751-2070 cchoffataz@yahoo.com

-----------------------------------

ARKANSAS

Rex & Pam Trammell 310 Log Cabin Road, Kingsland, AR 71652 Cleveland County, South Arkansas. Trammell's Engine Service, can offer assistance, some tools, a warm fire, coffee, cokes and sympathetic ear. 870-348-5501

---------------------------------------

Don and Donna Redding 2806 So. 16th St. Fort Smith, AR. 72901 I can offer you a garage and some tools for you to use. Water and elec. hookups Help find a mechanic (I'm not) (901) 785-4351 DRedd65761@aol.com

--------------------------------------------

Gordon and Nancy Wickstrom Cherokee Village, AR, near US 62/412 and US 63. No technical

expertise, but moral support and whatever help. 78 Royale Phone is 870-257-5576.

--------------------------------------------

Joe Henderson 8601 Wehmeyer Rd. Bentonville, AR 72712 Have manuals, enough tools to be dangerous.
PHONE (479) 855-7704 hendej@direcway.com
--------------------------

CALIFORNIA

Henry Davis 2131 Delaware Ave Santa Cruz, CA BEARING TOOL (831) 420-1785 (office) henry@henry-davis.com

-------------------------------------------

Chuck, Hanna & Barney Will -1837 Tularosa Road., Lompoc, Ca. Call first to see if we are home. 110 and have Ken Tomas BEARING TOOL Coming down or up US 101 , that is North or South you turn West toward the Ocean onto State Highway 246, Approximately 14 miles you come to Tularosa Road, It is a dead end road so pay attention, Be mindful that the intersection of Tularosa road and Hwy 246 at times can be dangerous to say the MOST!!! The sighting distance on the hill in either direction is inadequate, Any way you must turn Right only, Go up the slight hill and turn and my home is Located at 1837 Tularosa Road,. It is on the Left hand side and it is the 5th US Mail Box. If you are towing there is room also,. Stay to the right hand side of the drive and come on in. If either of the vehicles may be dripping oil there are a pair of drip pans located on the East side of the garage, Please use them. If you arrive at night and I May not be home to plug in your GMC. there are two choices, Front porch which is lighted or the plug sticking out from beneath the garage door. In any event do just like you do in a camp ground, ensure everything is off in the GMC then plug in and then turn on your power. I will be home shortly. I rarely go any where. If I do you will here about it on this net. (805) 736-7965 acwill@earthlink.net

---------------------------------------------------
Chuck and Mary Botts, 3882 Mt. Albertine Ave San Diego, 92111 Professionally remodeled 23'. Can direct to various services, places to visit/stay in area. Retired and travel from May to November. 1-858-292-1480 cbotts@san.rr.com

------------------------------------------------

Larry Price --Atascadero, California (Hwy. US 101) "Central Coast" area of CA : Workshop with GMC bay, dump station, elec hook-up under construction. "Way too many tools" .according to wife. 805/ 466-4195 work 805/ 545-3642

----------------------------------------------

Larry & Katie Kepple 22498 Buckboard Trail, Palo Cedro CA 96073 Near Redding in Northern Calif 530-547-3869

---------------------------------------------

Manny and Deolinda Trovao San Jose, California. Off highway 101 and 50 miles south of San Francisco. Call first to make sure we are around. Have many tools, some already know what to do by

themselves. 30 amp and water hookup. Also dump facility and (?) sense of humor. BEARING TOOL

408-923-4257

------------------------------------------

Steve Gilbert Auburn, CA Just off I-80 between Sacramento and Reno / Tahoe. Little driveway in little city by local High School! Have some tools, can direct to facilities, etc. (530)885-3273

--------------------------------------------------------------------------

George E Scott 4581 Via Maria Santa Barbara, CA 93111 If you need help or just visiting can provide "regular" tools, BEARING TOOL, floor jacks, basic welding, air tank, and battery charger. Internet and some "GMC parts (spare Air Bag, service and parts manuals if needed. and unlimited coffee or other ingestible liquids. Although I am not a mechanic, I offer lots of moral support and enthusiasm. I am retired and can offer transportation. By rearranging my driveway can park. (Water and electrical hookup available for overnights.) My wife, Alice, welcomes you, as does my security (King, my Doberman) Call any time of the day or night. Just off highway 154 3 miles north of downtown Santa Barbara. Go 2 miles north of Highway 101 on highway 154 (San Marcus Pass). Turn west on San Antonio Creek Road (2 streets to)

right on Via Maria you go straight ahead 3 homes to 4581 Via Maria Phone (805) 967-9735

CELL 451-8688 GSCOTT154@COX.NET

----------------------------------

Eugene Fisher 2480 Marina Ave. Livermore, Ca 94550 Place to park, place to dump, good shop, so-so mechanical skills. 925.447.8079

--------------------------------------

Toby & Nancy Maki, Riverside, CA. We're located just a couple of miles off Hwy. 60 (between Valley View and Rubidoux Blvd. exits) and about 7 miles down Limonite Ave. off I-15. Cities nearby include San Bernardino, Loma Linda, Redlands, Fontana, Rialto, Ontario, Beaumont, Banning,
Victorville, and So Cal mountain resorts of Big Bear and Lake Arrowhead.
Even though we're in a pretty good area for getting repairs, I know where the parts stores, junk yards, good restaurants, shopping and medical facilities are and can get you there quickly. Can provide some tools and mechanical skills, lots of moral support, transportation and unlimited coffee or other ingestible liquids. Have service and parts manuals if needed. Happy to help any way we can. We don't have a lot of room, but have acres of sympathy and heart, as well as gallons of hand cleaner and lots of rags. BEARING TOOL, torsion bar adjustment tool, floor jack, jack stands. (909) 792-3320, (909) 684-0958, email: tmaki@pe.net.

---------------------------------------------------------------------------------------------------------

Dave Posey, , very near I 80 and on Antelope Rd. in Citrus Height, CA; a suburb of Sacramento. A few tools, very little mechanical talent but I have space for several coaches, power , water, sewer connection, and a phone to seek out better care if needed. BEARING TOOL 916 725 3498

----------------------------------------

Dean Hanson 2318 Warm Springs Blvd. Fremont, Ca 94538 I have owned 1 or more GMC's since 1979. I have installed 3 engines and a wide variety of repairs. I am an experienced RV'er. This address is my construction yard where you could perform your own repair , seek help and/or advice and/or just stay the night. Please call in advance to make sure I'm around. (510) 657-9600

-----------------------------------------

Gary Berry Moved, check Washington

---------------------------------------

Bob Nerrie Redwood City, CA Knowing virtually nothing about the GMC and not mechanically inclined, I can give someone a lift if they needed it; I could refer them to Tony and Dave at Nor Cal GMC where my coach is being made roadworthy; and I do know where to get coffee (my wife's is best, but too strong for most!! 650-599-9673 ranern@aol.com

------------------------------------------------

Bert and Fay Curtis Kneeland, CA This is near Eureka, CA which is on Highway 101 - the coast route up CA. Our answering machine is on all the time and a real person can usually be reached between 1 PM and 2 AM Pacific time. We have no GMC specific tools, but have plenty of "regular" tools and full welding and fiberglass equipment as we manufacture parts for Lotus vintage race and street cars. We are willing to offer any assistance that we can. Coffee and beer are strictly a bring it yourself proposition as we never develop the taste for either, wine, tea, and hot chocolate may be available though! People need not

be in trouble to call, as we will welcome all calls from GMC owners for any reason even to just say hello, or share a meal. 707-443-8523

---------------------------------------------

Dick & Carmela Elsley 2721 N. Keats Ave Thousand Oaks, CA 91360 Ventura County (between LA and Santa Barbara) along US 101. Moral support, phones, beds, food, some tools, and the internet
805-492-5412 (Home) 805-905-8168 (Cell) elsley@gte.net

----------------------------------------------

Wayne Williams San Diego Area, have E Mail and cell phone as listed below. 1973 Painted Desert (619) 993-6421 awayne@utm.net www.taxpertwayne.com

-------------------------------------------------------

Bob Cook 411 N. Elena Ave. Redondo Beach, CA Even though I have a BEARING TOOL, all I can offer is advice on the phone. The area I live in is very congested and not suitable for working on GMC's. I can always talk on the phone if someone needs advice on GMC's or where to find parts. 310 372-9323

------------------------------------

Frank & Freddie Condos Ahwahnee, CA, , 20 miles from Yosemite, off Highway 49. Have a shop, plenty of tools including a BEARING TOOL, and can help fix most any thing. More importantly, hospitality, a place to park and any thing you wish to drink. 559-683-5185

------------------------------------------------------

Phil Swanson 1750 S. Point Dr. Bonita, CA 91902 Have 77 26 foot Palm Beach. Have some facilities and space. Well equipped with tools and BEARING TOOL I can help with repairs or help get you to a larger facility (619) 421-7276

---------------------------------------

Joe Hewitt 13262 Stone Canyon Rd. Poway, CA. 92064-2132 Phone 858-487-4044

--------------------------------------------

Vern and Davell Hays, 940 Bliss Court, Placerville, CA 95667 We are new GMC’ers, and don't have much fix it knowledge yet. However, we have a huge, private parking area in a beautiful location - historic
gold mining town of Placerville. It is located halfway between Sacramento and South Lake Tahoe on Highway 5. We have 2 GMC families within 5 miles us as well. The combined knowledge could be helpful to someone in trouble. . Phone 530 295-1344.

----------------------------------------

David L. Lewis 2004 Alborada Dr Camarillo, CA 1Hr+ North of LA on US 101. Have tools, air, BEARING TOOL, and spare wheel bearings. Also a spare Air Bag. There is room to work and a neighbor is a fine mechanic if help is needed. 805-383-9476 Cell 805-407-1088 davsharlew@msn.com

----------------------------------------------

Gene Barlow 1916 Pecan Tree St. Hemet Ca.92545 Phone 909 929 8507 sgbarlow@koan.com

------------------------------------

Bill and Joan Keilmy 351 Quintana Rd Morro Bay, CA Wife and I own Morro Bay Tire and Auto. Although we don't specialize in GMC repair, we do have knowledge and experience with brakes, suspension, steering and minor repairs. We will be glad to help.805 772 6060 shop 805 464 0513 home

------------------------------------------

Cal Terry... 7530 Darby Av. Reseda Ca 91335(San Fernando Valley) Driveway, electrical, air tools, BEARING TOOL Will offer any help I can. Phone 818 344 9420. Page me 818 529 0047.

-----------------------------------------

Charles Aulgur 9805 Ogram Drive La Mesa, CA . We have a La Mesa mailing address, however, we live in San Diego County in an unincorporated area between La Mesa and El Cajon on the southwest side of MT. Helix. La Mesa is the first subdivision going east out of San Diego on Interstate 8 and El Cajon is the second subdivision. We are about six miles east of where Interstate 8 intersects Interstate 15, and we live about two miles south of Interstate 8, just east of HWY 125. We have room to park a GMC in our driveway if minor repairs are needed, and you still have enough power to go up about a 12 % grade. Water and Electricity are available. I have a BEARING TOOL and about any other tools and capability to repair about anything on a GMC except the engine an transmission. We can furnish you good hospitality, good scotch, and all the fresh citrus you can eat. phone number is (619) 465-9875

------------------------

Creighton Fong 2112 10th Ave Oakland, CA 94606-2618 Tools, gas/mig welder - One mile from Lake Merritt, but most likely no parking available within 2blocks from my house BEARING TOOL

W 510 287-0868 H 510 536-1719 cfong@ebmud.com

------------------------------------------

Gene and Bobbie Schultz, 1161 Meadow Lake Drive, Vista, CA 92084 I live in North San Diego County,. I don't have any place to park, except out in the street, but that is still legal here in Vista.
Phone is 760 941 1538 or if calling from a pay phone somewhere in the Southwest, 800 315 6668.

------------------------------------
Craig Stanley 3511 Rolph way El Dorado Hills CA 95762 Bearing Puller Engine lift and replacement tools 916-933-1410

-------------------------------------------

Donald M. Foulger Fresno, Ca. 93727 I myself, am mechanically impaired but I have a local whiz with a complete workshop in a truck who can do anything for and to a GMC that could be needed. He even built a Modern GMC over a two year period. This mechanic plus will work weekends and is very reasonable in his prices. His hourly rate is $40 559-255-9302

-----------------------

Ron and Carol Barkley Highway 101, Eureka. California, . We are new owners of a 1976 El II with limited knowledge or tools, but are more than willing to assist fellow GMC’ers how ever we can. Someone is usually home. Home phone number is 707-444-2240.

---------------------------

Paul Stout 873 N 9th Ave Upland, CA 909 949 4145

------------------------------

Jim Richardson Solvang, CA. Area of coverage: Santa Ynez Valley to Buellton, CA. Have plenty of hand tools, floor jack and stands, free and questionable advice. Also have sewer dump. Plenty of refreshments and nourishments. Don't have bearing removal tools, yet...805-688-1659

-----------------------

Jerry and Suzanne Covington. San Dimas, CA. Near junction of the 10 and 210, about 40 miles east of Los Angeles. We have a place to park, and can help with local parts and repair facilities. In fact, we are near the shop of one of the West Coast masters. We have a decent selection of tools, some basic mechanical knowledge, and a good supply of cold beverages. Happy to help fellow GMC’ers in any way possible. (909) 305-1434 or sdtraveler@earthlink.net

---------------------------------

Don & Donna Fink, Bakersfield, CA. We have a shop with some tools and plenty of room to park for overnight or just a visit. Water and electricity hook up. Dump facility for macerators only. I know the area well and should be able to help find anything you might need. Plenty of refreshments available, so stop by when you are in the area and say howdy. 7 miles west of Hwy. 99 off of Rosedale Hwy (58) 661-589-5923 or daytime cell 661-333-4922.

---------------------------------------

Jerry Shelton, San Clemente, CA I'm not much of a mechanic but would be glad to help a GMC’er with info and help to the extent of my very limited knowledge. Tel 949-498-6267.

----------------------------------

Terry Taylor San Lorenzo, CA Reasonable Mechanical skills, good to excellent electronic skills, no special tools. 510-276-5111

----------------------------------

Art Sulenski Bakersfield, CA Southern part of state, Kern County Do not have much for a place to work on coaches but do know Don Fink (on the list also) who has a large area. I have hand tools (no brg tool yet) and am doing my own restore from the ground up. Phone # 661-588-7124
-------------------------------

Jerry Rich Torrance Calif. phone # 310 328-5623 jerryrich2@aol.com

-------------------------------------

Richard Castleberry Northern California (Chico 90 miles north of Sacramento) On Hwy 99 not far from Hwy 5. Have some tools and some space, own two 60 ton bottle jacks, etc. 530 354 0102

---------------------------

William B. Cannon 1437 Seacrest Dr Imperial Beach, CA 91932 GMC Pacific Cruisers member.

Tel: 619-429-9241 Cell: 619-922-2829 f8drvr@hotmail.com

-------------------------------

Doug and Barb Bodine, 41045 Mynatt, Three Rivers, Ca. 93271. We have some basic mechanical skills or can find someone to fix almost anything. We can act as tour guides, providers of safe shelter to those in need, give words of comfort or encouragement and can, on occasion even cook biscuits and gravy.

Phone: 559-561-4920, or E-Mail: Bodinehouse@aol.com

--------------------------

Howard and Susie Nielsen 3165 Torreon Dr Alpine Ca Have some tools, not far from parts house "twelve miles" over night parking Two miles east of I 8 in Alpine Ca. Have an engine hoist "out the bottom" that we will lend out to the GMC netters and owners. User pays for shipping out and back. We also have the TZE bearing tool and lots of hand tools “local use only" Ph # 619 445 9777 hnielsen2@cox.net

----------------------------

Black (really) Jagoe 4836 Ramsdell Ave La Crescenta, CA 91214-1950 818-248-7255 818-486-2336

--------------------------------

Gary and Joanne Worobec 59550 Evans Rd., Anza, CA off Highway
371 about 30 miles from Hemet, Palm Desert or Temecula. Welding equipment,
fabrication tools, electrical and plumbing. Can pretty much repair anything.
Lots of parking. Internet, dogs, cats, pool (in summer). We'd like to help
you out if you need it. 951-763-0518 gtw5@earthlink.net www.paxtonpatterson.com
-----------------------------------

Bill & Lill Deal 3065 Stockett Way San Diego, CA 92117 Phone 858 270-3023 Cell 619 417-8525
  1   2   3   4   5   6   7   8

Share in:

Related:

Any time of the day or night if you\Ford Windstar Ford Other gmc acadia gmc jimmy, Full Size gmc jimmy,...

Any time of the day or night if you\Slw9820 Day & Night Playmat Manual

Any time of the day or night if you\Day/Night, Vandal Resistant, ip network Surveillance Camera

Any time of the day or night if you\The Curious Incident of the Dog in the Night-Time

Any time of the day or night if you\Honeywell video systems high-resolution true day night camera with moving ir cut filter

Any time of the day or night if you\Subject: Re: gmc: gmc motorhome Battery Cutout

Any time of the day or night if you\Subject: re: gmc: (gmc) Conversion of ac to 134A

Any time of the day or night if you\3Let the day perish on which I was to be born, and the night which...

Any time of the day or night if you\Synchronous time switch, surface mounting, day, 1 co

Any time of the day or night if you\FBox Time Holiday : Correction On Date = Off Date is not working on every day now

Any time of the day or night if you\All goods must be paid for on day of sale. All goods must be removed...

Any time of the day or night if you\On This Day in Postal History: Notable Events by Month/Day/Year

Any time of the day or night if you\All dates and day numbers are as they were posted, correct or not....

Any time of the day or night if you\Panasonic Launches Stylish lumix gf6 for Capturing Day-to-Day Photographs in High Quality

Any time of the day or night if you\Pb 9-99 a. Letter dated June 14, 2017 from Linda Whitehead, Esq requesting...

Any time of the day or night if you\Gmc truck instrument new

Any time of the day or night if you\*This study guide must be turned in the day of your final. Bring...

Any time of the day or night if you\DiSalle, U. S. Vice President of gmc marketing

Any time of the day or night if you\2000 gmc truck towing capacities

Any time of the day or night if you\Subject: gmc: onan generator Output




manual




When copying material provide a link © 2017
contacts
manual-guide.com
search