Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01


Download 458.52 Kb.
NameSolaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01
page1/12
A typeDocumentation
  1   2   3   4   5   6   7   8   9   ...   12










Cisco BTS 10200 Softswitch

Solaris OS Install/Upgrade Procedure for Solaris 10 Version 0910-V01

Install-Core CD Version #: Solaris!Sun!sparc!10!0!0910!V01

Install-Finish CD Version #: Solaris!Sun!sparc!10!0!0910!BTS01

March, 2010

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100




THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1002R)

Cisco BTS 10200 Softswitch CD Jumpstart Procedure for Duplex Systems

Copyright © 2010, Cisco Systems, Inc.

All rights reserved.


Revision History

Date

Version

Description

16/12/09

1.0

New Jumpstart Creation for Update 8, Oct 2009

22/02/10

2.0

Updated comments from CSCte68020 for Netra 1280

03/03/10

3.0

Updated comments from CSCte92669 for T5220

26/03/10

4.0

Updated comments from CSCtf61863 for T5220

28/04/10

5.0

Updated comments from CSCtg47343 for Netra 1280 and T2000















































Table of Contents

Cisco BTS 10200 Soft switch Solaris OS Install/Upgrade procedure for Solaris 10 Version 0910-V01 1

Cisco BTS 10200 Softswitch Solaris OS Install/Upgrade procedure for Solaris 10 Version 0910-V01 2

Preface 5

1. Overview 9

Supported Hardware and Firmware 9

Cisco BTS 10200 Soft switch Solaris OS Install/Upgrade procedure for Solaris 10 Version 0910-V01 11

2. Precautions 10

3. Prerequisite Checklist 10

Cisco BTS 10200 Softswitch Solaris OS Install/Upgrade procedure for Solaris 10 Version 0910-V01 10

4. New OS Install 13

OS Core Installation Procedure 13

BTS-Finish Procedure 27

Setting Up the Network Configuration Files 29

Configuring the Element Management System 31

Configuring the Call Agent and Feature Server Installation 32

5. OS Upgrade 34

OS Core Upgrade Procedure 34

BTS Finish Upgrade Procedure 48

Appendix A: Mirroring the Disks 51

Appendix B: Setting the Time Zone 53

Appendix C: Where to mount a CD 54

Appendix D: Upgrading with RADIUS/LDAP 55

Appendix E: Alternative screens for ‘Select Geographic Regions’ 56

Appendix F: Alternative screens for ‘Select System Locale’ 58

Appendix G: Upgrade log 60


  1   2   3   4   5   6   7   8   9   ...   12

Share in:

Related:

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconInstalling Solaris 10 on x86 Edit section

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconFor the Windows®, hp-ux, Solaris, and Linux operating systems

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconInstallation instructions for hot fix 32tmine04 on solaris

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconItems to watch out for when you install or upgrade to Horizon 6 version 2 from View 1 or later

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconSolaris™ Telemetry Controlled Dome Camera Specifications General Tender Requirements

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconUpgrading the ecu to upgrade an ecu to run this version, select Utilities...

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconEsc version 9 Upgrade Directions

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconRelease date July 8, 2003 JackRabbit dvd player firmware (version...

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconBefore starting the Control Center upgrade/uninstall process, you...

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconUpgrade Product (smart upgrade from op16/17/18 Standard/Professional) 89. 99 £

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconNote: The messages you see at the beginning of the install may vary...

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconVersion Current version File name: ztwdvdup exe Version: 41. 101 Version replaced

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconVersion Current version File name: 2gfre107. Exe version: 07 Version replaced

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconProcedure: Performing Sanitization with an Ultrasonic Cleaner Procedure Goal

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconStart a new version Once you have made sure that the test suite passes...

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconYum install mysql-serveur php-mysql php-pecl-zip php-gd php-cli php php-mbstring
«yum install» permet de télécharger les packets (dans notre cas perl) puis de les installer avec la commande «make»

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconManual for the progressions upgrade

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconSw upgrade for ad9887ks-100

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconIii. Upgrade Instructions (Windows)

Solaris os install/Upgrade Procedure for Solaris 10 Version 0910-V01 iconHow to software upgrade a polycom hdx




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search