Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate




Download 0.73 Mb.
NameTypical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate
page1/8
A typeDocumentation
  1   2   3   4   5   6   7   8
AL040 Aluminum shot

99.9995% [7429-90-5] Al FW 26.98 4-8 mm pellets

Typical analysis:

Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm
AL1050 Aluminum ammonium sulfate dodecahydrate

99.999% [7784-26-1]

NH4Al(SO4)2ּ12H2O FW 452.98

White crystals

Typical analysis: 6% Al

Ca, Cr, Fe, Na < 1 ppm
AL400 Aluminum chloride hexahydrate

99.9999% [7784-13-6]

AlCl3ּ6H2O FW 241.43 White crystals

Typical analysis: 11% Al

Cd, Cr, Co, Cu, Fe, Mg, Si, Zn < 1 ppm
AL530 Aluminum fluoride trihydrate

99.99+% [15098-87-0] AlF3ּ3H2O FW 137.98

White powder

Typical analysis: 20% Al

Si, K, Na < 30; Ca < 15; Fe < 8;

Co, Mg, Mn, Zn < 5 ppm
AL500 Aluminum fluoride, anhydrous

99.99% [7784-18-1] AlF3 FW 83.98

White powder

Typical analysis: 32% Al

Si, K, Na ≤ 20; Ca ≤ 10; Fe ≤ 5;

Co, Mg, Mn, Zn < 3 ppm
AL850 Aluminum isopropoxide

99.99% [555-31-7]

(CH3)2CHO3Al FW 204.25

White powder

Typical analysis: 13% Al

Fe, K ≤ 30; Si, Na, Mn ≤ 15;

Zn, Ca, Mg ≤ 5; Cd, Ba, Cr, Co, Cu, Ni < 1 ppm
AL700 Aluminum nitrate nonahydrate

99.999+% [7784-27-2] Al(NO3)3ּ9H2O FW 375.13 White crystals

Typical analysis: 7% Al

Na, Zn ≤ 3; Fe < 1 ppm



AL710 Aluminum nitrate nonahydrate

99.998% [7784-27-2] Al(NO3)3ּ9H2O FW 375.13 White crystals

Typical analysis: 7% Al

Fe, Na ≤ 5; Ga ≤ 2

Cr, K, Cd, Co, Cu, Mg, Ni, Si < 1 ppm
AL800 Aluminum oxide

99.999% [1344-28-1]

Al2O3 FW 101.96

White powder

Typical analysis: 53% Al

Cu ≤ 5; Si, Fe < 2 ppm
AL810 Aluminum oxide

99.99% [1344-28-1]

Al2O3 FW 101.96 White powder

Typical analysis: 53% Al

Call for trace analytical data
AL900 Aluminum phosphate

99.995% [7784-30-7] AlPO4 FW 121.95

White powder

Typical analysis: 22% Al

Na ≤ 5; Fe ≤ 4; Cr, Ga < 1 ppm
AL1060 Aluminum potassium sulfate dodecahydrate

99.999% [7784-24-9] AlK(SO4)2ּ12H2O FW 474.38

White crystals

Typical analysis: 5.7% Al

Ca, Cr, Fe, Na < 1 ppm
AL1010 Aluminum sulfate hydrate

99.999% [17927-65-0] Al2(SO4)3ּxH2O

White powder

Typical analysis: 8.0 % Al

Ca ≤ 2; Cr, Fe, Na < 1 ppm
AS855 Ammonium arsenate monobasic

99.99%

(NH4)H2AsO4 FW 158.97

White crystals

Typical analysis: 47% As

Sb < 10 ppm

AS850 Ammonium arsenate tribasic

99.99%

(NH4)3AsO4 FW 193.03

White crystals

Typical analysis: 39% As

Sb < 10 ppm



NH200 Ammonium bromide

99.999% [12124-97-9] NH4Br FW 97.97

White crystals

Typical analysis: 82% Br

Pb < 3; Fe < 2 ppm
NH300 Ammonium carbonate

99.999% [506-87-6] (NH4)2CO3 FW 78.07

White chunks

Typical analysis: No trace impurities detected
CE750 Ammonium cerium(IV) nitrate

99.99+% [16774-21-3]

(NH4)2Ce(NO3)6 FW 548.23 Orange crystals

Typical analysis: 25% Ce

Ca, Mg, Fe < 3 ppm
NH400 Ammonium chloride

99.999% [12125-02-9]

NH4Cl FW 53.49 White crystals

Typical analysis: 66% Cl

Na, K < 5; Fe < 1 ppm
CR890 Ammonium dichromate

99.999% [7789-09-5]

(NH4)2Cr2O7 FW 252.10 Orange crystals

Typical analysis: 41% Cr

Na ≤ 7; Ca ≤ 2; Fe < 1 ppm
NH900 Ammonium dihydrogen phosphate

99.999% [7722-76-1]

(NH4)H2PO4 FW 115.03 White crystals

Typical analysis: 27% P

Na, Ca ≤ 5; Fe ≤ 2; Zn, Pb < 1 ppm

Call 908-996-6633 Fax 908-996-6697 info@mvlaboratories.com
NH500 Ammonium fluoride

99.99% [12125-01-8]

NH4F FW 37.04 White powder

Typical analysis: 51% F

Si < 50 ppm
TA550 Ammonium hexafluorotantalate(V)

99.99+%

NH4TaF6 FW 312.91

White crystals

Typical analysis: 57% Ta

Si < 30; Mg, Nb < 10 ppm

PT265 Ammonium hexabromoplatinate(IV)

99.998% [17363-02-9]

(NH4)2PtBr6 FW 710.62 Red powder

Typical analysis: 27% Pt

Na ≤ 2; Ag, Al, Ca, Cr, Fe, Si < 1 ppm
TE250 Ammonium hexabromotellurate(IV)

99.99%

(NH4)2TeBr6 FW 643.14 Orange crystals

Typical analysis: 20% Te

Call for trace analytical data
IR450 Ammonium hexachloroiridate(III) hydrate 99.99% [29796-57-4]

(NH4)3IrCl6 ·H2O FW 477.08 Olive green powder

Typical analysis: 41% Ir

Rh, K ≤ 25; Pt < 10 ppm
IR460 Ammonium hexachloroiridate(IV)

99.99% [16940-92-4]

(NH4)2IrCl6 FW 441.02

Purple black powder

Typical analysis: 43% Ir

Al, Cu, Si ≤ 7; Ca < 3 ppm
OS450 Ammonium hexachloroosmate(IV)

99.99% [12125-08-5] (NH4)2OsCl6 FW 439.00 Red crystals

Typical analysis: 43% Os

Call for trace analytical data

PD430 Ammonium hexachloropalladate(IV)

99.999% [19168-23-1]

(NH4)2PdCl6 FW 355.20

Red powder

Typical analysis: 30% Pd

Ca, Cu, Zn ≤ 2; Ag, Fe, Mg, Na, Pt < 1 ppm
PT460 Ammonium hexachloroplatinate(IV)

99.999% [16919-58-7]

(NH4)2PtCl6 FW 443.89

Yellow powder

Typical analysis: 43% Pt

Na ≤ 2; Ag, Al, Ca, Cr, Fe, Si < 1 ppm

RH450 Ammonium hexachlororhodate(III)

99.995+% [15336-18-2]

(NH4)3RhCl6 FW 369.74

Red powder

Typical analysis: 28% Rh

Ca, Mg, Na < 10 ppm
RU450 Ammonium hexachlororuthenate(IV)

99.99% [18746-63-9]

(NH4)2RuCl6 FW 349.87

Black powder

Typical analysis: 30.7% Ru

Ca, Na <30; Mg < 10, Pd, Si < 3 ppm
TE450 Ammonium hexachlorotellurate(IV)

99.99%

(NH4)2TeCl6 FW 412.30

Yellow crystals

Typical analysis: 31% Te

Call for trace analytical data
GE550 Ammonium hexafluorogerminate(IV)

99.995% [16962-47-3]

(NH4)2GeF6 FW 222.66

White crystals

Typical analysis: 32% Ge

Si ≤ 20; Ca, Fe, Mg < 1 ppm
NB550 Ammonium hexafluoroniobate

99.99+% [12062-13-4]

NH4NbF6 FW 224.91

White crystals

Typical analysis: 40% Nb

Ta ≤ 6; Si < 3; Ca ≤ 2, Al < 1 ppm


Contact us for bulk quantities and pricing
SI550 Ammonium hexafluorosilicate

99.999% [16919-19-0]

(NH4)2SiF6 FW 178.14

White crystals

Typical analysis: 15.7% Si

Al, Ti ≤ 3; Fe, Mg, Ca ≤ 1; Mn, Zn, K < 1 ppm
SN550 Ammonium hexafluorostannate

99.999% [16919-24-7]

(NH4)2SnF6 FW 268.71

White crystals

Typical analysis: 44% Sn

Si < 10; Ag, Ca, Cu, Mg, Pb, Sb < 1 ppm
TI550 Ammonium hexafluorotitanate

99.998% [16962-40-6]

(NH4)2TiF6 FW 197.95

White crystals

Typical analysis: 24.3% Ti

Si ≤ 10; Al ≤ 3; Ca, Mg, Fe < 1 ppm
NH450 Ammonium hydrogen fluoride

99.999% [1341-49-7]

(NH4)HF2 FW 57.04

White crystals

Typical analysis: 33% F

Fe < 10 ppm



Ammonium hydrogen phosphate,

See NH910, page 14
ZR550 Ammonium hexafluorozirconate

99.99% [16919-31-6]

(NH4)2ZrF6 FW 241.22

White powder

Typical analysis: 38% Zr

Hf, Si ≤ 30; Al < 5; Ca, Fe, Mg < 1 ppm
NH600 Ammonium iodide

99.999% [12027-06-4]

NH4I FW 144.94

White powder

Typical analysis: 88% I

Ca, Na ≤ 5; Mg ≤ 2 ppm
FE870 Ammonium iron(III) oxalate trihydrate

99.999% [13268-42-3]

(NH4)3Fe(C2O4)3·3H2O FW 428.07

Green-yellow powder

Typical analysis: 14% Fe

Mn, Ca, Cu, Co < 2; Mg, Ni, Zn < 1 ppm

FE1050 Ammonium iron(II) sulfate hexahydrate

99.999% [7783-85-9]

(NH4)2Fe(SO4)2 ·6H2O FW 392.14

Blue-green crystals

Typical analysis: 14% Fe

Mn, Ca, Cu, Co < 2; Mg, Ni, Zn < 1 ppm
FE1060 Ammonium iron(III) sulfate dodecahydrate

99.999% [7783-83-7]

(NH4)Fe(SO4)2 ·12H2O FW 482.19

Violet crystals

Typical analysis: 12% Fe

Mn, Ca, Cu, Co < 2; Mg, Ni, Zn < 1 ppm
V850 Ammonium metavanadate

99.999% [7803-55-6]

NH4VO3 FW 116.98 Off -White powder

Typical analysis: 44% V

Al ≤ 4; Ca, Fe ≤ 2; Ba, Mg, Na < 1 ppm
MO850 Ammonium molybdate

99.999% [13106-76-8] (NH4)2MoO4 FW 196.02

White powder

Typical analysis: 53% Mo

W <50 ND; Ca, Fe, K, Na < 1 ppm
NI1010 Ammonium nickel(II) sulfate hexahydrate 99.999% [7785-20-8]

(NH4)2Ni(SO4)2 ·6H2O FW 394.70 Green crystals

Typical analysis: 15% Ni

Fe, Mg ≤ 1 ppm
NH700 Ammonium nitrate

99.999% [6484-52-2] NH4NO3 FW 80.04 White crystals

Typical analysis: 77% NO3-

No trace impurities detected


Call 908-996-6633 Fax 908-996-6697 info@mvlaboratories.com
NH800 Ammonium oxalate monohydrate

99.999% [6009-70-7] (NH4)2C2O4ּ H2O FW 142.11 White crystals

Typical analysis: Ca, Na ≤ 5 ppm
RE850 Ammonium perrhenate

99.999% [13598-65-7] NH4ReO4 FW 268.24

White crystals

Typical analysis: 69% Re

Fe, Mo, W ≤ 3 ppm
NH1000 Ammonium sulfate

99.999% [7783-20-2] (NH4)2SO4 FW 132.14

White crystals

Typical analysis: 24% S

Ca ≤ 2; Fe, Cr, K, Na < 1 ppm
B820 Ammonium tetraborate tetrahydrate

99.999% [12228-87-4] (NH4)2B4O7ּ4H2O FW 263.38 White powder

Typical analysis: 16% B

Na ≤ 7 ppm
AU450 Ammonium tetrachloroaurate(III) hydrate 99.999% [13874-04-9] NH4AuCl4 ·xH2O FW 356.82 Yellow crystals

Typical analysis: 54% Au

Ag ≤ 3; Cu, Ni, Pd, Sn < 1 ppm
PD440 Ammonium tetrachloropalladate(II)

99.999% [13820-40-1]

(NH4)2PdCl4 FW 284.29

Olive green crystals

Typical analysis: 37% Pd

Ca, Cu, Zn ≤ 2; Ag, Fe, Mg, Na, Pt < 1 ppm
PT450 Ammonium tetrachloroplatinate(II)

99.99+% [13820-41-2] (NH4)2PtCl4 FW 372.98

Rose crystals

Typical analysis: 52% Pt

Na ≤ 2; Ag, Al, Ca, Cr, Fe, Si < 1 ppm

B550 Ammonium tetrafluoroborate

99.99+% [13826-83-0]

NH4BF4 FW 104.84

White crystals

Typical analysis: 10% B

Si ≤ 20 ppm
MO1040 Ammonium tetrathiomolybdate

99.995% [15060-55-6] (NH4)2MoS4 FW 260.27

Dark brown iridescent powder

Typical analysis: 37% Mo

W ≤ 50 ND; Ca, Fe, K, Mg, Na < 1 ppm
W1040 Ammonium tetrathiotungstate

99.99% [13862-78-7] (NH4)2WS4 FW 348.07

Orange crystals

Typical analysis: 53% W

Na, Zn < 6; Ca, Mo, Si < 3;

Al, Fe, Mg, Mn, Ni < 1 ppm
TI875 Ammonium titanyl oxalate monohydrate

99.999% [10580-03-7] (NH4)2TiO(C2O4)2 ·H2O FW 294.00 White powder

Typical analysis: 16% Ti

Al, Si ≤ 2; Ca, Mg, Fe < 1 ppm
W850 Ammonium tungstate, ortho

99.999% [11120-25-2]

(NH4)2WO4 FW 283.85

White powder

Typical analysis: 68% W

Ca, Na < 5 ppm
W855 Ammonium tungstate hydrate, meta

99.998% [12028-48-7]

(NH4)6H2W12O40·xH2O FW 2938.41

White powder

Typical analysis: 73% W

Na, Zn < 6; Ca, Mo, Si < 3;

Al, Fe, Mg, Mn, Ni < 1 ppm


Please visit our website www.mvlaboratories.com

SB050 Antimony shot

99.999% [7440-36-0]

Sb FW 121.75

Form: 1/4-1/2 inch pieces

Typical analysis:

Cu  3; Bi  1; As, Ni, Fe, Pb, Na < 1 ppm
SB600 Antimony(III) iodide

99.999% [7790-44-5]

SbI3 FW 502.46 Red powder

Typical analysis: 24% Sb

Cu, Bi, As, Ni, Fe, Pb, Na < 1 ppm
SB800 Antimony(III) oxide

99.999% [1309-64-4]

Sb2O3 FW 291.50

White powder

Typical analysis: 84% Sb

As, Pb < 10 ppm
SB820 Antimony(IV) oxide

99.999% [1332-81-6]

Sb2O4 FW 307.50

Pale yellow powder

Typical analysis: 79% Sb

As, Pb < 10 ppm
SB830 Antimony(V) oxide

99.999% [1314-60-9]

Sb2O5 FW 323.50

Pale yellow powder

Typical analysis: 75% Sb

As, Pb < 7 ppm
Antimony potassium tartrate

See Potassium antimonyl tartrate, page 32
AS050 Arsenic pieces

99.9998% [7440-38-2] As FW 74.92 Size: ¼-inch pieces

Typical analysis:

Sb < 2; Fe, Pb, Ni, Si < 1 ppm
AS600 Arsenic(III) iodide

99.999% [7784-45-4]

AsI3 FW 455.64

Red crystals

Typical analysis: 16% As

Sb < 5 ppm
AS800 Arsenic(III) oxide

99.999% [1327-53-3]

As2O3 FW 197.84

White powder

Typical analysis: 75% As

Sb  5; Fe, Mn < 2; Na  1 ppm
AS820 Arsenic(V) oxide hydrate

99.999% [12044-50-7]

As2O5ּxH2O FW 229.79 (anhyd.)

White powder

Typical analysis: 56% As

Sb < 10 ppm
Ammonium arsenate, tribasic

See AS850, page 2
Ammonium arsenate monobasic

See AS855, page 1
BA100 Barium acetate

99.999% [543-80-6]

Ba(C2H3O2)2 FW 255.43

White powder

Typical analysis: 52% Ba

Ca, Sr ≤ 3 ppm
BA200 Barium bromide

99.999% [10553-31-8]

BaBr2 FW 297.16

White crystals

Typical analysis: 46% Ba

Ca, Sr ≤ 2 ppm
BA300 Barium carbonate

99.999% [513-77-9] BaCO3 FW 197.35

White powder

Typical analysis: 70% Ba

Sr ≤ 3; Ca ≤ 2; Mn, Pb ≤ 1 ppm
BA310 Barium carbonate

99.95% [513-77-9]

BaCO3 FW 197.35

White powder

Typical analysis: 70% Ba

Sr < 200; Al ≤ 10; Ca ≤ 5; Fe, Mg, Na ≤ 3 ppm


Call 908-996-6633 Fax 908-996-6697 info@mvlaboratories.com
BA400 Barium chloride

99.999% [10361-37-2]

BaCl2 FW 208.25

White powder

Typical analysis: 66% Ba

Ca, Sr ≤ 3 ppm
BA410 Barium chloride dihydrate

99.999% [10326-27-9]

BaCl2· 2H2O FW 244.28

White powder

Typical analysis: 56% Ba

Ca, Sr ≤ 2 ppm
BA890 Barium chromate

99.999% [10294-40-3]

BaCrO4 FW 253.33

Yellow crystals

Typical analysis: 54% Ba

K < 10; Ca, Sr < 2 ppm
BA500 Barium fluoride

99.995% [7787-32-8]

BaF2 FW 175.34

White powder

Typical analysis: 78% Ba

Si < 30; Ca, Sr < 1 ppm
BA880 Barium hydroxide hydrate

99.995% [40226-30-0]

Ba(OH)2ּ xH2O FW 171.36 (anhyd.)

White crystals

Typical analysis: 73% Ba

Na, Sr < 10 ppm
BA700 Barium nitrate

99.9999% [10022-31-8]

Ba(NO3)2 FW 261.35

White crystals

Typical analysis: 52% Ba

Sr ≤ 0.1 ppm
BA800 Barium oxalate

99.999% [516-02-9]

BaC2O4 FW 225.36

White powder

Typical analysis: 61% Ba

Sr ≤ 1 ppm

BA1000 Barium sulfate

99.999% [7727-43-7]

BaSO4 FW 233.40

White powder

Typical analysis: 59% Ba

Sr ≤ 10 ppm
BE100 Beryllium acetate basic

99.999% [19049-40-2]

Be4O(C2H3O2)6 FW 406.16 White powder

Typical analysis: 8.9% Be

Fe, Si ≤ 3; Cu < 2; Al < 1 ppm
BES700 Beryllium nitrate solution

99.99% [13597-99-4] Be(NO3)2 FW 133.02 (anhyd.)

Colorless solution

Typical analysis: 35% w/w Be(NO3)2

Al, Na ≤ 60; Fe, Mg, Si ≤ 5 ppm
BE1000 Beryllium sulfate tetrahydrate

99.995% [7787-56-6]

BeSO4· 4H2O FW 177.14

White crystals

Typical analysis: 5.1% Be

Fe, Si ≤ 2; Cu, Al < 1 ppm
PT487 Bis(ethylenediamine)platinum(II) chloride

99.99% [21430-85-3]

Pt(C2H8N2)2Cl2 FW 386.19

Off-white powder

Typical analysis: 51% Pt

Na ≤ 4; Ag, Al, Ca, Cr, Fe, Si ≤ 1 ppm
BI050 Bismuth pieces

99.999% [7440-69-9]

Bi FW 208.98

Form: ¼-½ inch pieces

Typical analysis: Ag, Na, Ni, Pb ≤ 1;

Al, Cd, Mg, Sb, Sn ≤ 0.5 ppm
BI500 Bismuth fluoride

99.999% [7787-61-3]

BiF3 FW 265.98

White powder

Typical analysis: 78% Bi

Si < 10; Fe, Pb ≤ 3 ppm
BI400 Bismuth chloride

99.999% [7787-60-2] BiCl3 FW 315.34

White powder

Typical analysis: 66% Bi

Fe ≤ 5 ppm


Contact us for custom synthesis

BI600 Bismuth iodide

99.999% [7787-64-6] BiI3 FW 589.69

Black powder

Typical analysis: 35% Bi

Cu, Pb ≤ 1 ppm
BI700 Bismuth nitrate pentahydrate

99.999% [10035-06-0]

Bi(NO3)3· 5H2O FW 485.07

White crystals

Typical analysis: 43% Bi

Fe, Pb ≤ 3 ppm; Ag, Cu ≤ 1 ppm
BI800 Bismuth oxide

99.999% [1304-76-3] Bi2O3 FW 465.96

Yellow powder

Typical analysis: 90% Bi

Cu, Ni, Pb ≤ 1 ppm
BI450 Bismuth oxychloride

99.999% [7787-59-9]

BiOCl FW 260.43

White powder

Typical analysis: 80% Bi

Cu, Ni, Pb ≤ 1 ppm
BI750 Bismuth oxynitrate

99.999% [10361-46-3]

BiONO3 FW 286.99

White crystals

Typical analysis: 73% Bi

Cu, Ni, Pb ≤ 1 ppm
B880 Boric acid

99.999% [10043-35-3]

H3BO3 FW 61.83

White crystals

Typical analysis: 17% B

Na ≤ 5; Ca, Mg ≤ 2 ppm
B900 Boron phosphate

99.99+% [13308-51-5]

BPO4 FW 105.78

White powder

Typical analysis: 10% B

Na, Si ≤ 20 ppm
Ammonium tetraborate tetrahydrate

See B820, page 4
Ammonium tetrafluoroborate

See B550, page 5
Potassium tetrafluoroborate

See B560, page 35
CD070 Cadmium rod

99.999% [7440-43-9]

Cd FW 112.41 Form: ½-in. diameter rods

Typical analysis: Cu, Fe, Zn ≤ 1;

Al, Bi, Cr, Na, Ni, Pb, Si, Sr < 1 ppm
CD080 Cadmium shot

99.9999% [7440-43-9]

Cd FW 112.41

Form: 3 mm shot

Typical analysis: No trace impurities detected
CD100 Cadmium acetate hydrate

99.999% [89759-80-8]

Cd(C2H3O2)2·xH2O FW 266.54 (anhyd.)

White powder

Typical analysis: 43% Cd

Cu, Fe, Zn < 1 ppm
CD200 Cadmium bromide

99.999% [7789-42-6]

CdBr2 FW 272.22

White powder

Typical analysis: 41% Cd

Cu, Fe, Zn < 1 ppm
CD300 Cadmium carbonate

99.999% [513-78-0]

CdCO3 FW 172.41

White powder

Typical analysis: 64% Cd

Ca, Cu, Fe, Mg, Zn ≤ 1 ppm

CD400 Cadmium chloride

99.999+% [10108-64-2]

CdCl2 FW 183.32

White powder

Typical analysis: 61% Cd

Cu, Fe, Zn ≤ 1 ppm


Call 908-996-6633 Fax 908-996-6697 info@mvlaboratories.com

CD410 Cadmium chloride hydrate

99.998% [34330-64-8]

CdCl2 ∙xH2O FW 183.32 (anhyd.)

White powder

Typical analysis: 61% Cd

Cu, Fe, Zn < 1 ppm

CD500 Cadmium fluoride

99.99% [7790-79-6]

CdF2 FW 150.40

White powder

Typical analysis: 74% Zn

Si < 30 PPM; Ca, Cu, Fe, Mg, Zn < 1ppm
CD600 Cadmium iodide

99.999% [7790-80-9] CdI2 FW 366.21

White crystals

Typical analysis: 31 % Cd

Ca, Cu, Fe, Mg, Zn, Si < 1 ppm
CD700 Cadmium nitrate tetrahydrate

99.999% [10022-68-1]

Cd(NO3)2·4H2O FW 308.47

White crystals

Typical analysis: 18% Cd

Ca, Cu, Fe, Mg, Zn < 1 ppm
CD800 Cadmium oxide

99.999% [1306-19-0]

CdO FW 128.40

Brown powder

Typical analysis: 87% Cd

Cu, Fe, Zn ≤ 1 ppm
CD1000 Cadmium sulfate hydrate

99.999% [7790-84-3]

CdSO4· xH2O FW 208.46 (anhyd.)

White crystals

Typical analysis: 48% Cd

Ca, Cu, Fe, Mg, Zn ≤ 1 ppm
CA100 Calcium acetate hydrate

99.999% [62-54-4]

Ca(C2H3O2)2·xH2O FW 158.17 (anhyd.)

White crystals

Typical analysis: 21% Ca

Sr < 3 ppm
CA200 Calcium bromide hydrate

99.999% [71626-99-8]

CaBr2·xH2O FW 199.90 (anhyd.)

White crystals

Typical analysis: 14% Ca

Sr < 3; Na, Fe, Mn, Si < 1 ppm
CA300 Calcium carbonate

99.999% [471-34-1]

CaCO3 FW 100.09

White powder

Typical analysis: 40% Ca

Sr ≤ 5; Na ≤ 2; Cu, Fe, Mg, Mn, Si < 1 ppm
CA310 Calcium carbonate

99.99+% [471-34-1]

CaCO3 FW 100.09

White powder

Typical analysis: 40% Ca

Sr ≤ 20; Mg ≤ 10; K, Na ≤ 2; Fe, Mn, Si < 1 ppm
CA400 Calcium chloride hydrate

99.999% [22691-02-7]

CaCl2·xH2O FW 110.99 (anhyd.)

White crystals

Typical analysis: 19% Ca

Sr ≤ 4; Na ≤ 1; Cu, Fe, Mg, Mn, Si < 1 ppm
CA460 Calcium chloride, anhydrous

99.999% [22691-02-7]

CaCl2 FW 110.99

White crystals

Typical analysis: 36% Ca

Sr ≤ 5; Na ≤ 2; Cu, Fe, Mg, Mn, Si <1 ppm
CA500 Calcium fluoride

99.99+% [7789-75-5]

CaF2 FW 78.08

White powder

Typical analysis: 51% Ca

Si < 30; Sr < 10; Mg, Na Fe, Mn, Si <1 ppm
CA880 Calcium hydroxide

99.995% [1305-62-0]

Ca(OH)2 FW 74.10

White crystals

Typical analysis: 54% Ca

Sr ≤ 7; Na ≤ 3; Cu, Fe, Mg, Mn, Si < 3 ppm


Contact us for custom synthesis

CA700 Calcium nitrate hydrate

99.999% [35054-52-5]

Ca(NO3)2·xH2O FW110.99 (anhyd.)

White crystals

Typical analysis: 18% Ca

Sr < 3; Cu, Fe, Mg, Mn, Na, Si < 1 ppm
CA870 Calcium oxalate

99.999% [563-72-4]

CaC2O4 FW 128.10

White powder

Typical analysis: 31% Ca

Sr ≤ 5; Na ≤ 2; Cu, Fe, Mg, Mn, Si < 1 ppm
CA800 Calcium oxide

99.99+% [1305-78-8]

CaO FW 56.08

White powder

Typical analysis: 71% Ca

Sr ≤ 10; Na ≤ 4; Cu, Fe, Mg, Mn, Si < 4 ppm
CA1000 Calcium sulfate

99.999% [7778-18-9]

CaSO4 FW 136.14

White powder

Typical analysis: 29% Ca

Sr ≤ 4; Na < 2; Cu, Fe, Mg, Mn, Si < 1 ppm
IR470 Carbonylchlorobis(triphenylphosphine)- iridium(I)

99.99% [14871-41-1]

[(C6H503P]2Ir(CO)Cl FW 780.25

Yellow crystals

Typical analysis: 25% Ir

RH470 Carbonylchlorobis(triphenylphosphine)- rhodium(I)

99.99+% [13938-94-8]

[(C6H5)3P]2Rh(CO)Cl FW 690.96

Yellow powder

Typical analysis: 15% Rh

Si < 8; Ir, Pt < 4 ppm
CE100 Cerium(III) acetate hydrate

99.999% [537-00-8]

Ce(C2H3O2)3 ·xH2O FW 317.26 (anhyd.)

White crystals

Typical analysis: 40% Ce

Rare Earths < 10 ND; Ca ≤ 7; Mg ≤ 2;

Fe, Zn < 1 ppm
CE200 Cerium(III)bromide hexahydrate

99.999% [14457-87-5]

CeBr3·6H2O FW 487.83

Pale yellow crystals

Typical analysis: 29% Ce

Rare Earths < 10 ND; Ca, Mg ≤ 5 ppm
CE300 Cerium(III) carbonate hydrate

99.999% [54451-25-1] Ce2(CO3)3·xH2O FW 460.27 (anhyd.)

Off white powder

Typical analysis: 47% Ce

Rare Earths < 10 ND; Ca, Fe, Mg ≤ 3 ppm
CE400 Cerium(III) chloride heptahydrate

99.999% [18618-55-8]

CeCl3·7H2O FW 372.48

White crystals

Typical analysis: 38% Ce

Rare Earths < 10 ND; Ca, Mg ≤ 5 ppm
CE500 Cerium(III) fluoride

99.99% [77758-88-5]

CeF3 FW 197.12

White powder

Typical analysis: 71% Ce

Rare Earths < 10 ND; Si ≤ 30; Ca, Fe, Mg ≤ 3
CE700 Cerium(III) nitrate hexahydrate

99.999% [10294-41-4] Ce(NO3)3 ·6H2O FW 434.22

Pale yellow crystals

Typical analysis: 32% Ce

Rare Earths ≤10 ND; Ca ≤ 7; Fe, Mg ≤ 5 ppm
CE870 Cerium(III) oxalate hydrate

99.999% [15750-47-7] Ce(C2O4)3·xH2O FW 544.29 (anhyd.)

White crystals

Typical analysis:

Rare Earths < 10 ND; Ca, Fe ≤ 3 ppm
CE800 Cerium(IV) oxide

99.999% [1306-38-3]

CeO2 FW 172.12

Pale yellow powder

Typical analysis: 81% Ce

Rare Earths < 10 ND; Ca, Fe, Mg ≤ 5 ppm


Call 908-996-6633 Fax 908-996-6697 info@mvlaboratories.com

CE1000 Cerium(III) sulfate octahydrate

99.999% [10450-59-6] Ce2(SO4)3·8H2O FW 712.55 White crystals

Typical analysis: 20% Ce

Rare Earths < 10 ND; Ca, Fe ≤ 3 ppm
Ammonium cerium(IV) nitrate

See CE750, page 2
CS100 Cesium acetate

99.999% [3396-11-0]

CsC2H3O2 FW 191.95

White crystals

Typical analysis: 69% Cs

Rb ≤ 5; K, Na ≤ 1 ppm
CS200 Cesium bromide

99.999% [7787-69-1]

CsBr FW 212.81

White powder

Typical analysis: 62% Cs

Rb ≤ 5; K, Na ≤ 1 ppm
CS300 Cesium carbonate

99.995% [534-17-8]

Cs2CO3 FW 325.82

White powder

Typical analysis: 81% Cs

Ba ≤ 9; K ≤ 2; Na, Rb, Sr ≤ 1 ppm;

Ca, Cr, Fe, Li, Mg, Mn, Si < 1 ND
CS400 Cesium chloride

99.999% [7647-17-8]

CsCl FW 168.36

White powder

Typical analysis: 81% Cs

Rb ≤ 5; K, Na ≤ 1 ppm
CS500 Cesium fluoride

99.99% [13400-13-0]

CsF FW 151.90

White chunky powder

Typical analysis: 87% Cs

K, Na, Rb Si < 10 ppm
CS600 Cesium iodide

99.999% [7789-17-5]

CsI FW 259.81

White powder

Typical analysis: 51% Cs

Rb < 5; K < 3 ppm
CS700 Cesium nitrate

99.999% [7789-18-6]

CsNO3 FW 194.91

White crystals

Typical analysis: 68% Cs

Rb ≤ 5; K, Na ≤ 1 ppm
CS1000 Cesium sulfate

99.999% [10294-54-9]

Cs2SO4 FW 361.87

White powder

Typical analysis: 37% Cs

Rb < 3; K, Na < 1 ppm
CO425 Chloropentaamminecobalt(III) chloride

99.99+% [13859-51-3]

[Co(NH3)5Cl]Cl2 FW 250.45

Purple powder

Typical analysis: 24% Co

Ni < 30; Fe < 5 ppm
RH485 Chloropentaamminerhodium(III) chloride

99.99% [13820-95-6]

[Rh(NH3)5Cl]Cl2 FW 294.42

Pale yellow powder

Typical analysis: 35% Rh

Si < 20; Ir, Pt < 10 ppm
RH480 Chlorotris(triphenylphosphine) rhodium(I)

99.99+% [14694-95-2]

[(C6H5)3P]3RhCl FW 925.24

Dark red powder

Typical analysis: 11% Rh


Please visit our website www.mvlaboratories.com
CR050 Chromium flake

99.998% [7440-47-3]

Cr FW 52.00

1/4-inch pieces

Typical analysis:

Ca, Fe ≤ 10; Al, Mg, Si ≤ 3 ppm
CR400 Chromium(III) chloride hexahydrate

99.99+% [10060-12-5]

[Cr(H2O)4Cl2]Cl·2H2O FW 266.45

Green chunky powder

Typical analysis: 19% Cr

Fe ≤ 40; Si < 5 ppm
CR700 Chromium(III) nitrate nonahydrate

99.999% [7789-02-8]

Cr(NO3)3·9H2O FW 400.14

Violet crystals

Typical analysis: 13% Cr

Fe ≤ 5; Al, Na ≤ 3 ppm
CR800 Chromium(III) oxide

99.995% [1308-38-9]

Cr2O3 FW 151.99

Green powder

Typical analysis: 68% Cr

Na ≤ 10 ppm
CR1000 Chromium(III) sulfate hydrate

99.999% [15244-38-9]

Cr2(SO4)3·xH2O FW 392.17 (anhyd.)

Green crystals

Typical analysis: 21% Cr

Call for trace analytical data



Ammonium dichromate

See CR890, page 2



Potassium chromate

See CR870, page 32
Potassium dichromate

See CR895, page 32

CO060 Cobalt powder

99.999% [7440-48-4]

Co FW 58.93

Particle size: -22 mesh

Typical analysis: Na ≤ 5

Fe, Ni, Si ≤ 2 ppm
CO100 Cobalt(II) acetate

99.999% [71-48-7]

Co(C2H3O2)2 FW 177.01

Purple crystals

Typical analysis: 33% Co

Na ≤ 2; Fe, Ni, Si< 1 ppm
CO110 Cobalt(II) acetate tetrahydrate

99.999% [6147-53-1]

Co(C2H3O2)2·4H2O FW 249.01

Reddish purple crystals

Typical analysis: 24% Co

Na ≤ 2; Fe, Ni, Si < 1 ppm
CO200 Cobalt(II) bromide

99.999% [7789-43-7]

CoBr2 FW 218.74

Green powder

Typical analysis: 27% Co

Na ≤ 2; Fe, Ni, Si< 1 ppm
CO300 Cobalt(II) carbonate hydrate

99.999% [137506-60-6]

CoCO3 · xH2O FW 118.94 (anhyd.)

Red powder

Typical analysis: 43% Co

Na ≤ 2; Fe, Ni, Si< 1 ppm
CO400 Cobalt(II) chloride

99.999% [7646-79-9]

CoCl2 FW 129.84

Blue powder

Typical analysis: 45% Co

Na, Fe, Ni, Si < 1 ppm
CO410 Cobalt(II) chloride hexahydrate

99.999% [7791-13-1]

CoCl2·6H2O FW 237.93

Red crystals

Typical analysis: 25% Co

Na ≤ 2; Fe, Ni, Si < 1 ppm


Call 908-996-6633 Fax 908-996-6697 info@mvlaboratories.com
CO500 Cobalt(II) fluoride tetrahydrate

99.99% [13817-37-3]

CoF2·4H2O FW 168.99

Red crystals

Typical analysis: 35% Co

Call for trace impurities data
CO700 Cobalt(II) nitrate hexahydrate

99.999% [10026-22-9]

Co(NO3)2·6H2O FW 291.04

Orange crystals

Typical analysis: 20% Co

Na ≤ 2; Ni, Fe, Si ≤ 1 ppm
CO800 Cobalt(II,III) oxide

99.999% [1308-06-1]

Co3O4 FW 240.80

Black powder

Typical analysis: 68% Co

Na ≤ 4; Ni, Fe, Si ≤ 2 ppm
CO820 Cobalt(II) oxide

99.999% [1307-96-6]

CoO FW 74.93

Olive green powder

Typical analysis: 79% Co

Call for trace impurities data
CO1000 Cobalt(II) sulfate hydrate

99.999% [60459-08-7]

CoSO4· xH2O FW 154.99 (anhyd.)

Red crystals

Typical analysis: 21% Co

Na ≤ 2; Fe, Ni, Si < 1 ppm
  1   2   3   4   5   6   7   8

Share in:

Related:

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconAbstract few studies have directly measured sulfate reduction at...

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconAstm b 209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconBlack: Up to 24 ppm (letter)

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconZahid Ansari, pmp®, ppm

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconTypical Specification

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconTypical automatic onsite

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconTypical Specification for Lochinvar

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconChapter 3 Typical Maintenance Procedures 18

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconElectrophoretic Separations of pancreatic enzyme samples: Sodium...

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconDivision 23 52 33. 13 Aluminum water-tube boilers

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate icon19-adt-4 Aluminum Dove Tail Gratings

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconAluminum engine block and cylinder heads

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconSection 05551 aluminum stair nosings

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconSection 08 44 00 glazed aluminum curtain walls

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconAluminum-clad wood sliding glass doors

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconGuide Specification section 08 44 13 glazed aluminum curtainwall

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconHooded Roof Cast Aluminum Propeller Fan

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconIntelligent analysis, including perimeter detection (warning line,...

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconIntelligent analysis, including perimeter detection (warning line,...

Typical analysis: Cu, Si ≤ 2; Ca, Fe, Mg < 1 ppm al1050 Aluminum ammonium sulfate dodecahydrate iconModel grsi spun Aluminum Intake Gravity Ventilator




manual




When copying material provide a link © 2017
contacts
manual-guide.com
search