Added to ae spec for Seismic Sensors


Download 21.76 Kb.
NameAdded to ae spec for Seismic Sensors
A typeDocumentation
manual-guide.com > manual > Documentation

Project Date: SECTION 281600

Project ID: SAFE AND VAULT MONITORING SYSTEMS

Project Name:

Added to AE Spec for Seismic Sensors

SECTION 281600

INTRUSION DETECTION

  1. GENERAL



    1. SECTION INCLUDES



      1. Provide safe and vault intrusion detection equipment, including engineering, components, installation and commissioning.



    1. RELATED SECTIONS



      1. Section 111600: Vault Equipment

      2. Section 132700: Vaults



    1. REFERENCES



      1. Reference Standards: Provide systems which meet or exceed the requirements of the following publications and organizations as applicable to the Work of this Section:

        1. Underwriters Laboratories Inc. (UL):

          1. UL 639: Intrusion Detection Devices.





    1. SYSTEM DESCRIPTION



      1. Intrusion Detection Devices: Basis-of-design is the Honeywell SC100 Seismic Detection Unit:

        1. Listed for UL Intrusion Detection Applications.

        2. Supports multiple end-of-line resistor values using onboard configuration switches.

        3. Supports remote test feature.

        4. Supports mounting in concrete or on metal.

        5. Monitors Lock position

        6. Monitors temperature rise

7. Monitors vibration within safe or vault for a range of up to a 16.4-foot radius

    1. SUBMITTALS



      1. Manufacturer’s Product Data: Submit manufacturer’s data sheets indicating systems and components proposed for use, including instruction manuals.



      1. Shop Drawings: Submit complete shop drawings including connection diagrams for interfacing equipment, list of connected equipment, and locations for major equipment components.



      1. Record Drawings: During construction maintain record drawings indicating location of equipment and wiring. Submit an electronic version of record drawings not later than Substantial Completion of the project.



      1. Operation and Maintenance Data: Submit manufacturer’s operation and maintenance data, customized to the system installed. Include system and operator manuals.



      1. Field Tests: Submit results of field testing of every device including date, testing personnel, retesting date if applicable, and confirmation that every device passed field testing.



      1. Maintenance Service Agreement: Submit a sample copy of the manufacturer’s maintenance service agreement, including cost and services for a one year period for Owner’s review. Maintenance shall include, but not be limited to, labor and materials to repair the system, provide test and adjustments, and regular inspections.



    1. QUALITY ASSURANCE



      1. Manufacturer: Minimum ten years experience in manufacturing and maintaining similar systems. Manufacturer shall provide toll-free technical assistance and support available 24/7. Alarm manufacturer shall be certified compliant with ISO 9001.



      1. Installer: Minimum two years experience installing similar systems, and acceptable to the manufacturer.



      1. Environmental Conditions: System shall be designed to function in the following environmental conditions:

        1. Storage Temperature: Designed for a storage temperature of -10° C to 70°C.

        2. Operating Temperature: System shall be designed for an operating temperature of
          -40° F to 158° F.

        3. Humidity: System shall be designed for normal operation in an 85% relative humidity environment.



      1. Power Requirements: Components shall have the following electrical specifications. The detector shall operate using standard 3mA @12VDC power.



      1. Detector Enclosure: A metal cabinet, suitable for various mounting options. Dimensions shall not exceed 3.15 inches in height, 2.36 inches in width or .83 inches in depth.



    1. DELIVERY, STORAGE, AND HANDLING



      1. Deliver materials in manufacturer’s labeled packages. Store and handle in accordance with manufacturer’s requirements, in a facility with environmental conditions within recommended limits.



    1. WARRANTY



      1. Manufacturer’s Warranty: Submit manufacturer’s standard one-year warranty for the system.



  1. PRODUCTS



    1. MANUFACTURER



      1. Seismic Sensor Manufacturer: SC100 by Honeywell, www.security.honeywell.com.



    1. SYSTEM PERFORMANCE



  1. The safe or vault shall be monitored by Electronic Vibration Sensors such as the Honeywell SC100 or equivalent where designated. The detector shall be listed for use in UL 639 Intrusion Detection applications. The detector shall detect activity from acetylene torches, sledgehammers, repeated knocks from hammer and chisel attacks, drilling, mechanical cutting, diamond drills, hydraulic jacks and other methods of intrusion. The detector can detect vibration, the position of the door lock, and rate of temperature rise. When the sensor detects intrusion, the sensor shall provide an indication of the fault to the control panel. Each vibration sensor shall report a trouble condition if disconnected from its zone expander. The installer shall follow manufacturer’s instructions when installing and programming system equipment.

    1. The Vibration Detector shall operate using a power supply providing 12 VDC at 3 mA.

    2. The Vibration Detector shall operate within a temperature range of -40° F to 158° F.

    3. The detector shall feature up to a 16.4 foot detection radius.

    4. The detector shall trigger an alarm in the event of a rapid increase in temperature of a minimum of 6° F per minute.

    5. The detector shall trigger a faulted condition while the safe or vault door is unlocked.

    6. The detector shall feature an optional mounting plate to secure the device directly to a concrete or steel surface, such as the SC110 Mounting Plate or equivalent.

    7. The detector shall feature options to prevent the safe or vault door from opening when the seismic detector is on the night position plate. The mounting kit can also be wired to prevent system arming when the detector is on the day position plate, such as with the SC111 Movable Mounting Kit or equivalent.

    8. To promote better key management the detector shall feature optional keyhole protection with a reinforced steel lever to secure the keyhole so that it can be wired to inhibit arming of the system while the lever is in the day position. In the night position the lever shall cover the keyhole and stop intruders from inserting explosives or stolen keys in the keyhole such as with the SC112 Keyhole Protection Kit or equivalent.

    9. The detector shall facilitate regular testing using an internal or external test transmitter and shall be simple to test prior to system arming such as with the SC113 Internal Test Transmitter or SC115 External Test Transmitter.

    10. When designated, the detector shall feature an optional armored cable kit to protect the detector’s cabling, such as with the SC114 Armed Cable Kit.

    11. When required, the detector shall feature an optional wall recess mounting kit to install seismic detectors in concrete walls during construction such as the SC116 Wall Recess Mounting Kit or equivalent.

    12. When required, the detector shall feature an optional floor recess mounting kit to install seismic detectors in concrete floors during construction such as with the SC117 Floor Recess Mounting Kit or equivalent.

    13. When required, the detector shall feature an optional spacer plate to create a wider gap between keyhole and the keyhole protection kit such as with the SC118 Spacer or equivalent.



  1. EXECUTION



    1. EXAMINATION



      1. Examine site conditions prior to installation. Notify Architect and Owner in writing if unsuitable conditions are encountered. Do not start installation until site conditions are acceptable.



    1. INSTALLATION



      1. The Safe or Vault Intrusion detection system shall be installed and tested in accordance with manufacturer’s installation instructions.

        1. Coordinate interfaces with Owner’s representative where appropriate.

        2. Provide backboxes, connectors, supports, conduit, cable, and wire for a complete and reliable installation. Obtain Owner’s approval for exact location of all boxes, conduit, and wiring runs prior to installation.

        3. Install conduit, cable, and wire parallel and square with building lines, including raised floors areas. Do not exceed forty percent fill in conduits. Gather wires and tie to create an orderly installation.

        4. Coordinate with other trades to provide proper sequencing of installation.



    1. FIELD COMMISSIONING AND CERTIFICATION



      1. Field Commissioning: Test system as recommended by manufacturer, including the following:

        1. Conduct complete inspection and testing of equipment, including verification of operation with connected equipment.

        2. Test devices and demonstrate operational features for Owner’s representative and authorities having jurisdiction as applicable.

        3. Correct deficiencies until satisfactory results are obtained.

        4. Submit written copies of test results.



    1. TRAINING



      1. Conduct on-site system training, with the number of sessions and length of sessions as recommended by the manufacturer. Training shall include administration, provisioning, configuration, operation and diagnostics.

END OF SECTION.

.

281600 -

Share in:

Related:

Added to ae spec for Seismic Sensors iconSeismic Processing Workshop™ io utility™ V 18

Added to ae spec for Seismic Sensors iconIntegrated seismic instrumentation system

Added to ae spec for Seismic Sensors iconThis guide spec is intended to be used with “

Added to ae spec for Seismic Sensors iconFor marathon Spec 600 Series

Added to ae spec for Seismic Sensors iconPhoton's Lexus gs300 Turbo spec list

Added to ae spec for Seismic Sensors iconAem’s Infinity Plug & Play ecu for U. S. Spec

Added to ae spec for Seismic Sensors iconStructural heterogeneity of the mid-crust adjacent to the central...

Added to ae spec for Seismic Sensors iconThis manu-spec® utilizes the Construction Specifications Institute...

Added to ae spec for Seismic Sensors iconAbstract Determination of the precise locations of seismic events...

Added to ae spec for Seismic Sensors iconSpec note: This master guide specification Section is intended for...

Added to ae spec for Seismic Sensors icon[numbers added by scanner]

Added to ae spec for Seismic Sensors iconDepartment of Value Added Tax

Added to ae spec for Seismic Sensors iconRelease Notes New Features Added

Added to ae spec for Seismic Sensors iconValue Added Service Features Appendix Y

Added to ae spec for Seismic Sensors iconType field has an added purpose. If the first two characters in it are !x

Added to ae spec for Seismic Sensors iconDelhi Value Added Tax Refund Form

Added to ae spec for Seismic Sensors iconUser selectable variable test frequency added

Added to ae spec for Seismic Sensors iconDelhi Value Added Tax Refund Claim Form

Added to ae spec for Seismic Sensors iconBooks, 2004 paperback, 2006, added Preface

Added to ae spec for Seismic Sensors iconVideo surveillance remote devices and sensors




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search