To request for product service and order replacement parts, please call our customer service department at


Download 120.34 Kb.
NameTo request for product service and order replacement parts, please call our customer service department at
A typeDocumentation
manual-guide.com > manual > Documentation










Page #

Warning label placement 3



Service 4



Important safety instructions 5



Overview drawing 7



Part list 8



Assembly 9



Adjustments 12



Operating the controller 13



Maintenance and cleaning 15



Storage 16



Transporting the table 17



Warranty 17



Part request fax foam 18






To request for product service and order replacement parts, please call our customer service department at

1-866-924-1688
Monday through Friday, 8:00 am-5:00 pm Pacific Standard Time,

or email at: service@paradigmhw.com
Please have the following information ready when requesting for service:
Your name Phone number Owner’s manual

Model number Serial number Part number

Date of Purchase
*If the product has major defects which prevent it from functioning properly, please return it to the store of purchase within the period allowed by the store.
Paradigm Health & Wellness, Inc.

1189 Jellick Ave.

City of Industry, CA 91748



For Massage Table:

  1. Maintain the table periodically. Make sure all screws are secure and the cable

has not deteriorated or frayed. Make sure there are no cracks in the wood

structure.

  1. Do not overload the table beyond the recommended weight limit. This could

result in serious injury to the user.

  1. Do not use alcohol based cleaners when cleaning the vinyl. This could cause

damage to the vinyl material. Use warm soapy water and wipe dry.

  1. Make sure when using the table that all four legs are at the same level. Using

the legs at different levels can cause the table to be unstable and cause injury.

  1. Maximum weight capacity- static weight: 2000 lbs/909 kgs

working weight: 500 lbs/227 kgs

For Heating Pad:

Read all instructions carefully before using this heating pad. Retain this owner’s manual for future reference.

  1. Use this heating pad only for its intended use as described in this manual. Do

not use attachments not recommended by the manufacturer.

  1. The heating pad should never be left unattended when plugged in. Always

unplug this heating pad from the electrical outlet immediately after using and

before cleaning.

  1. Do not insert pins into the heating pad.

  2. Never operate this heating pad if it has a damaged cord or plug. If it is not

working properly, if it has been dropped or damaged, or dropped into water.

Return the heating pad to a service center for examination and repair.

  1. Do not carry this heating pad by supply cord or use cord as a handle.

  2. Keep the cord away from heated surface.

  3. Do not use outdoors.

  4. Do not operate where aerosol (spray) products are being used or where oxygen

is being administered.

  1. To disconnect, please turn the power switch of the controller to the OFF position,

then remove plug from electrical outlet.

  1. This heating pad is not intended for medical use in hospitals.

  2. Do not use the heating pad with another heating appliance together.

  3. Do not use the heating pad on any type of conventional bed, pull-out bed or

fold-up bed.

  1. This heating pad is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, a helpless person, an infant or

a person insensitive to heat.

  1. This heating pad is not intended for use by young children or infirm persons

without supervision or instruction concerning use of the appliance by a

responsible person.

  1. Examine the heating pad frequently to check that there are no signs of wear or

damage. If the heating pad is malfunctioning, discontinue immediately and

consult with the manufacture for repair.

  1. For Household Use Only.








Part#

Description

Quan.

Part#

Description

Quan.

001

Front Bed with Frame

1

020

Long Cable

2

002

Rear Bed with Frame

1

021

M6x65mm Self Tapping Bolt

4

003

Upper Buckle

2

022

Armrest

1

004

Lower Buckle

2

023

Armrest Loop

2

005

Handle

2

024

M3x20mm Round Head Self Tapping Screw

14

006

Rubber Foot

4

025

M6 Nylon Nut

4

007

Lower Leg End Cap

4

026

M6x75mm Bolt

8

008

Long Brace

4

027

M6x75mm Self Tapping Bolt

4

009

U Shaped Headrest

1

028

Plastic Washer Ø18xØ6x2t

16

010

Short Brace

4

029

M4x18mm Mod. Truss Head Screw

20

011

Upper Leg

4

030

M6x30mm Bolt

4

012

Lower Leg

4

031

M4x20mm Self Tapping Screw

18

013

Hinge

3

032

M6x50mm Self Tapping Bolt

4

014

Leg Knob

8

033

Plastic Washer Ø13xØ6x2t

16

015

End Panel

2

034

Plastic Washer Ø15xØ6x4t

8

016

M4x20mm Round Head Self Tapping Screw

11

035

Cross Brace

2

017

Headrest Bushing Plate

1

036

M4x20mm Self Tapping Bolt

4

018

Face Cushion

1

037

Bushing

2

019

Short Cable

4

038

Heating Pad

1 Set





Release the Buckles and then open the table. Take out the Face Cushion, U Shaped

Headrest, Armrest, and Heating Pad from

underneath of the table.

Pull out the left and right pair of Legs and

straighten each joint.


Lift the table up until all four legs are on the

floor.






Lift one end of the table and pull out to open

table fully.




Insert both Right/Left Headrest Sticks with

Headrest into the holes of the Headrest

Bushing Plate.





Attach armrest corner straps onto Armrest

Loops underneath the Front Bed.




Attach front strap to the U Shaped Headrest.



Place the Face Cushion onto the U Shaped

Headrest by lining up the Velcro pads.

WARNING: HEADREST IS FOR LIGHT USE

ONLY! PLEASE DO NOT PLACE HEAVY

WEIGHT OR STRONG PRESSURE WHEN

RESTING.



Use the elastic corner straps on the Heating

Pad to hold the massage table in place and

prevent them from slipping.

Ensure when fixing the Heating Pad to the

massage table, it will not move or crease.

(The creased part tends to cause high

temperature which is very dangerous.)



Press up on the Locking Handles and then

adjust the Headrest to the desired angle.

Press down on the Locking Handles after

adjustment to lock into place.


Lay the table on the Rubber Footed side and

then remove the Leg Knobs.


Remove the Lower Leg and then place the

Lower Leg back onto the Upper Leg matched

up to the desired holes for adjusting the height

of the table.

Tighten the Leg Knobs after adjustment.
NOTE: Adjust all of the four Legs to the

same height.








USING THE HEATING PAD

Do not cover the controller and exert pressure on the

controller.

Plug this heating pad from the electrical outlet. Turn the

power switch of the controller to the “ON” position and the

power indicator light should light up. Press the temperature

set button until 5 LED’s are lit up (Maximum heat). It will

take at least 30 minutes to get to the maximum heat. Once

it has reached to the maximum heat, you can press the

temperature set button to set the heat level. The guide below gives you an indication of the heat levels and what the number of lit LED’s mean in terms of the level of heat.

To prevent the heating pad from getting too hot, the heat level

will automatically reduce to a low heat level after being on

maximum heat for one hour. When the heating pad is likely to be used for an

extended period, it is suggested that the controller should be adjusted to low heat

level 1 or 2 (1 or 2 LED’s are lit up). Please preheat the heating pad for 30 minutes

to 1 hour before use.



The controller has a timer function (Middle button) which allows you to control how

long you want the heating pad to be used. You can set it for up to 8 hours in hourly

timings. The amount of time in “time mode” will be accumulated by the number of

times you press the time set button on the controller. For example, press the time

set button 3 times and it will set for 3 hours. If you want to cancel the timer, press

the cancel button (Bottom button) and all settings will cease. To resume, you will

have to input the settings using the time set button again.

If the indicator lights (LED’s) alternately flash, check the connector (plug) and ensure

the controller is fully connected to the heating pad. Press the cancel key to cancel

the flashing, then reset to the required function. If the indicator lights (LED’s)

simultaneously flash, check if the throw/over heating pad is folded or tucked, spread

the throw/over heating pad, press the cancel key to cancel the flashing, after several

minutes reset to required function. If you cannot cancel the flashing, you should

unplug the heating pad from the electrical outlet and check the lead is damaged or

not. If the flashing continues, the heating pad must not be used and be checked by

a qualified repairer.
Timer modes



AFTER USING THE HEATING PAD

When the heating pad is not in use, please turn the power switch of the controller to

the “OFF” position, unplug the heating pad from the electrical outlet. If the heating

pad is not to be used for a long period of time, store it in a cool and dry place.



For Massage Table:

You should check your massage table for any kind of wear and tear before each and every use.

  1. Check the legs, bed and cables for wear and tear.

  2. Replace damaged and worn components immediately.

  3. Keep all damaged equipment out of use until it is repaired.



For Heating Pad:

  1. Always unplug this heating pad from the electrical outlet immediately after using and before cleaning.

  2. Clean the surface of the cord with soft cloth.

  3. Do not submerse the controller in the water or get it wet at all.

  4. Do not dry clean this heating pad.

  5. To clean the heating pad, wipe it down with a soft damp cloth and very mild

  6. detergent. The heating pad should be hung in a ventilated location to dry

naturally.

  1. Do not use industrial solvents such as benzene, kerosene or similar solvents to

clean the heating pad.

  1. Do not connect the heating pad to power supply to dry it.

  2. Do not dry the heating pad under the sun.

  3. Do not iron the heating pad.

  4. Do not use an appliance such as a hair dryer to dry the heating pad.

  5. Allow the heating pad to dry naturally.

  6. Do not use the heating pad if it is damp or wet.







For Massage Table:

  1. Place the massage table upside down on the floor.

  2. Completely fold the legs flat under the table.

  3. Make sure the Cables, U Shape Headrest, Face Cushion, Armrest, and Heating Pad are inside the table before closing it.



For Heating Pad:

  1. When not in use, allow the heating pad to cool down before folding, then gently

fold it.

  1. Make sure the heating pad is dry before folding. The heating pad should be

hung in a ventilated location to dry naturally.

  1. Insulation of the heating pad will be damaged if it is dried under the sun or ironed.

Damage on the insulation material will cause safety problem.

  1. The heating pad should be folded without any crease and store it in a cool dry

place.





The table is easy to carry with the shoulder strap of carry bag.



Paradigm Inc. warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in according to Paradigm’s Owner’s Manual. Paradigm’s obligation under this warranty is limited to replacing free of charge, any parts which may prove to be defective under normal home use. This warranty does not include any damage caused by improper operation, misuse or commercial application. From the date of purchase, the frame is warranted to be free from defects for 1 (one) year. All parts and workmanship, including electronics and its console cases, upholstery, foam, ball bearings, pulleys, cables, shocks, all tension mechanisms, wheels, pedals and hardware are to be free from defects for 90 days. This warranty is offered only to the original owner and is not transferable. Proof of purchase is required.


IRONMAN

PARTS REQUEST FAX FORM

Please fax this form to (1-626-810-2166)

OR YOU CAN EMAIL CUSTOMER SERVICE REQUESTS TO

service@paradigmhw.com
NAME: ___________________________________________________________

ADDRESS: ________________________________________________________

CITY ___________ STATE _______________ ZIP _______________

TELEPHONE: (Day) _________________________________________________

(Night) ________________________________________________

(Email Address) ________________________________________

SERIAL#: _____________________________________________

MODEL#: _____________________________________________

PURCHASE DATE: _________________________________________________

PURCHASE FROM: _________________________________________________


PART #

DESCRIPTION

QTY



































































































YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS”


OFFICIAL USE ONLY
SHIP DATE: ___________________________________________

TRK #: _______________________________________________

BACK ORDER: ________________________________________




Share in:

Related:

To request for product service and order replacement parts, please call our customer service department at iconCall Forwarding, Call Waiting & Call Holding, and Voice Mail Service etc

To request for product service and order replacement parts, please call our customer service department at iconBank”) with its principal place of business at 2200 Grand Avenue,...

To request for product service and order replacement parts, please call our customer service department at iconAim This procedure is aimed at ensuring an effective induction process...

To request for product service and order replacement parts, please call our customer service department at iconTo reduce the risk of electric shock, do not remove the cover (or...

To request for product service and order replacement parts, please call our customer service department at iconThe product is equipped with a low power laser device. To ensure...

To request for product service and order replacement parts, please call our customer service department at iconIncluded in this Model V12 Service and Parts Manual are

To request for product service and order replacement parts, please call our customer service department at iconCustomer Service Guidelines for EverQuest

To request for product service and order replacement parts, please call our customer service department at iconSeven Steps to Great Customer Service

To request for product service and order replacement parts, please call our customer service department at iconAbout Telephone Doctor® Customer Service Training

To request for product service and order replacement parts, please call our customer service department at iconRequest for Proposal- selection of Service Centre Agencies

To request for product service and order replacement parts, please call our customer service department at iconCustomer-facing information to be sent out prior to in-service training

To request for product service and order replacement parts, please call our customer service department at iconNo user-serviceable parts inside. Refer servicing to qualified service personnel

To request for product service and order replacement parts, please call our customer service department at iconDepartment of Business & Public Service

To request for product service and order replacement parts, please call our customer service department at iconIt’s not about Your Product or Service!”

To request for product service and order replacement parts, please call our customer service department at icon§17 Violating rules, orders or other requirements of Commission Switching...

To request for product service and order replacement parts, please call our customer service department at iconCall to Order and Roll Call of Chapters

To request for product service and order replacement parts, please call our customer service department at iconI have a product and/or service that I think the travelling public can use. Who shall I contact?

To request for product service and order replacement parts, please call our customer service department at icon11 Internet Denial of Service (DoS) Service blocking 49

To request for product service and order replacement parts, please call our customer service department at iconFlorida Department of Education Curriculum Framework Program Title: Marine Service Technologies

To request for product service and order replacement parts, please call our customer service department at iconFlorida Department of Education Curriculum Framework Program Title:...




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search