A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a


Download 72.47 Kb.
NameA pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a
A typeDocumentation
manual-guide.com > manual > Documentation


POS INTEGRATION MANUAL

2006-09 Edition



1. Introduction

A POS system may be integrated to DVR system through direct serial connection or using POS Convertor H/W. Through the integration, you can investigate a transaction with transaction data overlaying on a video image, by either live viewing or playing back.
2. Features

- Viewing transaction text data overlayed on live and playback images

- Transaction data stored on database file

- Transaction data can be searched by the terms specified with corresponding video image

- Supports up to 16 POS systems (using POS Convertor)

- Adjustable text and viewing area size



1. System Connection

When the physical distance between POS system and DVR is short (less than 10m(32ft)), serial connection (RS232) can be used.
2. Connection Diagram

Connect cross-wired serial cable (DB9) from POS system to DVR directly.



3. DVR Program Setup

Run DVR Program. Go to “Control Setup” and check on “POS Enable” and press “Setting”. Then check on "Serial". Set Module to the POS System name available from the list or "General" if not from POS Setup. And set Serial properties (Baud Rate, etc) corresponding to the POS System currently connected.





1. Overview of POS Convertor

When the distance between POS System and DVR is longer than 10m (32ft) or more than 2 POS Systems are connected, the POS Convertor H/W can be utilized

Front view




Rear View


DIP Switch Selection

Input Type Selection

Serial Input ; Parallel Input ;





1

2

3

4

5

6

7

8







1

2

3

4

5

6

7

8

ON

























ON

























OFF

























OFF


























Baud Rate Selection





1

2

3

4

ON













OFF















Baud Rate

1

2

3

4

2400bps

OFF

OFF

OFF

OFF

4800bps

OFF

OFF

OFF

ON

9600bps

OFF

OFF

ON

OFF

19200bps

OFF

OFF

ON

ON

38400bps

OFF

ON

OFF

OFF

57600bps

OFF

ON

OFF

ON

115200bps

OFF

ON

ON

OFF


2. System Connection Through POS Convertor

DB9 Input Connection

* Physical distance between POS and DVR should be less than 10m(32ft).

DB25 Input Connection




* Physical distance between POS and DVR should be less than 10m(32ft).


RS485 Output Connection

For the distance grearter than 10m(32ft)

* RS485-To-RS232 Convertor or To-USB Convertor can be purchased in your local market.

RJ45(LAN) Output Connection

For the distance grearter than 10m(32ft) or up to 16 POS Systems connection over TCP/IP network



* IP address must be assigned the POS Convertor. Please refer to the next page.


3. Assigning IP Address to POS Convertor

When RJ45(LAN) output method is used to POS Convertor, IP address must be assigned over TCP/IP network.

Plug in the POS Convertor to network and run “POSConverter.exe” from CD-Rom provide or from C:\DVSS4\POSConfig and IP configuration tool runs as shown below.



Search

Run Search and MAC Addresses of all POS converters connected to LAN will be listed on Module List.

POS Network Setting

Enter internal IP address (e.g 192.168.100.1), Subnet, and Gateway. Set Port to default 5000.

DVR Network Setting

Enter IP address of DVR. Set Port to default 5000.

POS Serial Setting

Set Baud to 57600, DataBit to 8, Parity and Flow to None.

Delimiter: Time, Size, Character

Enter ‘0’ in Time and Size and type ‘0A’ (hexadecimal) in Character.

Operation mode: TCP server, TCP client

Select ‘TCP client’ and ‘Startup’ to connect to DVR.

Setting

After configuration is done, press Setting to apply the changes.
4. POS Configuration From DVR Program

Run DVR program. Go to “Control Setup” and check on “POS Enable” and press “Setting”.



Serial Ouput From POS Convertor

▶Communication Type ; select Serial

▶POS Setup ;

- POS Device / Mapping Camera : POS1 connects to Cam1, POS2 to Cam2….

- Module : set to the POS System name available from the list or "General" if not

- Duration : text display time on live video image

▶Display Setting ;.

- Show : check on to view text on live video image

- Font Setting : set font color, size and weight of the text displayed

- Text Area : set text viewing area in live camera view

▶A Term Of Saving DB ; set the period to keep transaction data in DB. Default 7 days.

▶Serial ;

- Set POS Port to the current COM port connecting to POS System.

- Set Baud Rate, Data Bit, Parity Bit and Stop Bit to the same value the POS has

RJ45(LAN) Output From POS Convertor

▶Communication Type ; select TCP/IP

▶POS Setup ;

- POS Device / Mapping Camera : POS1 connects to Cam1, POS2 to Cam2….

- Module : set to the POS System name available from the list or "General" if not

- Duration : text display time on live video image

▶Display Setting ;.

- Show : check on to view text on live video image

- Font Setting : set font color, size and weight of the text displayed

- Text Area : set text viewing area in live camera view

▶A Term Of Saving DB ; set the period to keep transaction data in DB. Default 7 days.

▶TCP/IP ; enter the IP address of POS Convertor (refer to 3. Assigning IP Address to POS Convertor)



If the POS System has the capability of sending transaction data through TCP/IP to the specified IP address of DVR (normally PC-based POS System), TCP/IP connection method can be used without POS Convetor.




As this integraton job may require more customizing depending on the capability of POS, please contact us to get more technical information.



Run POS Search from Search Mode of DVR Program to search from transaction data DB.




POS Integration Manual Page of

Share in:

Related:

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconInstruction of atm/pos function

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconUsed mikron hsm800 with (4) Pos. Pallet changer

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconPos. Seg. Req. Loop Notes and

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconPage Pos. Seg. Req. Loop Notes and

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconModernizing your System z Application Development with the ibm rational...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a icon1. System shall be a microprocessor based fully integrated lighting...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconIntegrated seismic instrumentation system

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconSection 23 09 23 direct-digital control system for hvac

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconUnsystematic Risk in Enterprise Resource Planning System Integration

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconInsulated Core Metal Wall Panel System with Integrated Components

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconHow to configure timeGuardian/QuickBooks for direct integration

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconThe mini nvr was specially designed for network video surveillance...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconSchedule-based system providing maximum flexibility of programming...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconHoneywell video systems rapid eye™ multi-media dsp digital video...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconAbstract Use cases are one of the uml diagram used to illustrate...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconAbstract This guide outlines enhancements to the Windows® desktop...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a icon1. 1Aim 1The aim of the Operational and Support Concept Document...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconWith 8+ years’ work experience. Proven skills and experience in Linux,...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconDevelopment of pedestrian-to-vehicle communication system prototype...

A pos system may be integrated to dvr system through direct serial connection or using pos convertor H/W. Through the integration, you can investigate a iconManual release switches and the load distribution center. The Dcr...




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search