User Manual Please read this operation instruction manual carefully before use。
Download 118.82 Kb.
|
2.4GHz Wireless Video Record Door Phone with Code Keypad User Manual   ---------------------------------------------------------------- Please read this operation instruction manual carefully before use。 Catalogue  1. Introduction …………………………………………………1 2. Features ……………………………………………………..1 3. Indoor Monitor………………………………………………2-3 4. Outdoor Camera……………………………………………. 4-5 5. Setting……………………………………………………….6-8 6. Operation……………………………………………….. 8-11 7. Entrance guard ID Card Operation………………… 11-14 8. Installation……………………………………………… 14-18 9. Specifications……………………………………………. 18 10.Working Environment…………………………………… ..18 11. Notice……………………………………………... 18 12. Common troubleshooting.……………………………….. 19 13. Package……………………………………………… 19 14. Maintenance ……………………………………………..20 1. Introduction The product can used in villas, offices, hotels and other places. Please carefully read this user manual before using the product and follow the manual to install and operate. 2. Features (1) 2.4GHz digital frequency hopping and encryption technology, transmission distance up to 250m in free field, robust anti-interference (2) The new technology to be sure the reliable quality. (3) 7inch LCD screen with OSD manual (4) Outdoor camera: CMOS 0.3Mega (5) With intercom, monitor, unlock functions, camera with night vision. (6) Indoor machine can be active and automatic take pictures/video, and save into the external SD card: Max: 32GB. (7) Indoor machine can display the date and time (8) Mini USB connector, high capacity lithium-ion rechargeable battery (model: BL-5J) (9) Built-in 8 chord rings (10) Waterproof outdoor camera can be powered by lithium battery (model: BL-5J). (11) With high sensitivity touch technology. (12) The outdoor camera has the call back tones. (13) Wireless unlocks distance: 3-5m.； (14) Support at most 500 ID cards； (15) Suitable most of the electronics lock, with delay unlocks functions。 (16) Volume, brightness & contrast adjustable； (17) Easy to install；
  
MJIDSW:  FAW:    5.Setting （1）Enter the menu: Press any button to turn on the monitor, then press  to collect  ，and then press  to enter the sub-menu as the following photo:。 （2）SD Card: collect the SD Card icon after entering the sub-menu setting state, then press button to set the SD Card as following photo: A、Volume: entered the above state. Please press button to check the memory card volume. It will show the card capacity if card in; if no SD card, it will show CARD OUT.B、Format: move to the Format state, and press to Formatting(it will last 3s)(3）Bright: After entering the setting state, press to collect Brightness, then press to come the following interface. You can adjust the brightness by  or and press  to escape.
( 7 ) Time: After entering the setting state, press or to collect Time, then press to adjust, and you can press or to change the time. At last, press to escape.( 8 ) Motion Detect：Enter the menu,press or to select Motion Detect,press button,then press or to open or close，press to confirm,please press to escape when finish setting。( 9 ) Setting (Photo/Record): After entering the setting state, press or to collect Setting, then press for further（As picture）： Press or to select photo or record,then press to escape。( 10 ) Rings：Enter the menu,press or to select rings,then press to confirm .6.Operation （1）Menu: Press any button to turn on the monitor then you will come to the following interface:  （ 2）Monitor:After you enter the above interface,press to monitor the outside;press again to finish the monitor state and back to the standby state. Note: If the outdoor camera powered by the built in battery, you can not monitor the outside until powered by the adapter.
A．Photo: there are 2 ways to take photo. 1) Photo automatically: the system will take a photo once the visitor press the outdoor camera call button. 2) Photo manually: press the indoor monitor’s Photo button to take photo. Press once to get 1 photo; the new photo will automatically cover the old one if the memory card is full. B ．Playback, Delete the photo:A fter you come into the main menu, press go to Media, then press to collect the photo. And then press to check or delete the photo.
1) Record automatically: the system will make a 10s movie once the visitor press the outdoor camera call button 2) Record manually: press the indoor monitor’s record button to record. Press once to get 10s movie; the new movie will automatically cover the old one if the memory card is full. B .Playback, Delete the movie:After you come into the main menu, press go to Media, then press to collect movie. And then press to check or delete the movie.( 5) Unlock: under the intercom state, press to unlock the door, and the unlock icon is in red as following photo: (6) Unlock Delay Setting: 1. For FAW Outdoor Unit: Choose the suitable time according to the different lock,please choose 1s for Electronic Door lock. 2. Setting 1s For MJIDSW Outdoor Unit （ 7）Talk：under the monitor state, press for talking as following photo: If there is any visitor press the outdoor camera call button, the indoor monitor will ring; meanwhile the visitor’s image will appear in the monitor screen. In this situation, you have 2 choices: A．If it is an unwelcome visitor, you can press the Monitor button to end and come to the standby state, or do nothing for it, and it will come into standby state after 15s. B．If it is a welcome visitor, you can press intercom button for talk and press unlock button to unlock the door. （8）Adjust the volume： A ：Indoor monitor volume: under the monitor state, press button for intercom state, then press button, and you can adjust the volume by pressing button as the following photo. B ：Outdoor camera volume: under the monitor sate, press button for intercom state, then press button, and you can adjust the volume by pressing button as following photo. ( 9) Charge the battery The indoor monitor battery icon turns red means the battery power is not enough, and you need recharge the battery by the USB adapter. Usually, it needs charge about 6hours. The battery icon is full means charging finish. The battery standby time is about 4 hours.
In dark,the IR LED Light will be turned on automatically when press call button,now the image is B/W. 7.Entrance guard id cards operation The outdoor entrance guard control system chooses the best CPU in the market, store 500 user cards and 10 universal code, the data will not loss even if power outages, with the function of recovery programming code will not losing the original data, ID card induction unlock, ID card induction or passwords unlock, ID card induction and password unlock together, indoor unit unlock, remote control unlock within 5 meters etc 5 ways unlock model, Outdoor unit also provide open the door button, often open/often atresia interface. Can be used to all kinds of office buildings, business institutions, government agencies, factories, residential district and other places。 1．Technical parameters
2．Acousto-Optic indication LED indication light
Build-in buzzer
3．Setup and use ways 1). Initial code: Programming code : 8888, Universal code:5555, Private key:1234. 2). Enter the Programming Mode： Press * + Programming code + # Enter into programming 4.Function set：（under programming model） （1）Modify programming code: Press 0 + New code + # new code again + #（Code: 4-6 Random figures） （2）Setup unlock way：（Factory default : read valid cards unlock） Press 100 + # Read valid cards unlock Press 101 + # Read valid cards and input valid code unlock Press 102 + # Read valid cards or input valid code unlock Note: if unlock by card + code, you need type the code within 10s after reading the card, Only type private code can’t open the door. （3）Add User ID cards： Press 2 + code + read cards + # 1). Continuous increasing cards: read the second card after pressing #, and the codes NO will be given automatically. And press # to confirm. card code is 4 unrepeatable No.（0001-0500） （4）Delete user cards： Press 30000 + # Delete all user cards Press 3 + read cards + # Delete all read cards Press 3 + card code + # delete corresponding cards （5）Setup unlock time(Factory default is 3 seconds） Press 4 + Time + # time , Time : double digits ，unit : seconds。 （6）Security model：（Default setting: close） Press 700 + # Close security function Press 701 + # Open security function Note: Use 5 invalid cards consecutively or use valid card but use invalid code 5 times, the system will dead lock 5 minutes. (7） Universal code setup Press 8 +（0-9）Address code + new code + # + new code again + # （code:4-6 random figures），When use code unlock: input the code first then press # confirmation. ( 8 ) Press 9 + 86 all system go to default setting 5. Exit programming code Press * Exit programming code, Note：all setting will be saved by press # in two seconds, press * exit. 6. User code setup Press * input code after read the ID card，Press # change card code。Input 4 random figures as the new code then press # ,input the new code again, press # again save the code。user card code can’t unlock without the card together. 7. Operation instruction （1）Recovery program code: if you forget the programmed code, please press the outdoor unit reset button (under the battery box) and back to the very begging and other date will no change. （2）If you unlock the door by card + code, please type the code after read the card in red and blue LED flashing, and press # to confirm. （3）if you unlock by the universal code, you need press # after type the code。
（2）Delete all unlock remote controls：power on outdoor unit and press the remote control pair key 8-10 seconds, then delete successful.
(1 )Outdoor camera: A: avoid the strong sunlight; B: near to the indoor monitor; C: height: about 1.5M. (2) Unlock setting：Important ( Must entering the Intercom state when using Indoor Monitor to unlock,then press unlock button.) 
Connection way as following photo:    Note: the e-lock is not in the packing list. Specifications:
9. Notice (1) The machine should be placed on the place with solid, well-ventilated, dry and no direct sunlight, no strong magnetic fields and dust; (2) Do not use chemical to clean the surface; clean, soft and dry cloth can be used to Clean.
(4) Outdoor and indoor unit needs to match with specified models, and can not mix to use with other models or other company's product. (5) Do not open the machine without permission, please contact with your dealer or our technical department if you need any maintenance.
11.Package (1) Indoor monitor Size: 238×168×24(H)mm (2) outdoor camera MJIDSW Size: 170×115×70(H)mm FAW Size: 138×98×55(H)mm (3) indoor monitor USB charger：5V2A (4) USB Charger connect wire 2.5 (5) Rain cover (6) screw set (7) Manual (8) 3 cores unlock wire（9）Battery (10)indoor monitor bracket (11)ID Card (12) 2G SD Card (13) Remote Controller  12. Machine Maintenance (1)Keep surface clean, dust on the machine can be cleaned by soft dry cloth; (2)Need to turn off the power switch when clean indoor unit, (3)If machine surface is difficult to clean by different dry cloth, it can be cleaned by soft towel moistened by diluted neutral detergent, then clean with a dry cloth; (4)Do not use organic solvents such as benzene, thinner or gasoline to clean, these solvents may damage the machine or cause the machine and surface discoloration. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Share in:
