This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section


Download 144.33 Kb.
NameThis Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section
page1/3
A typeDocumentation
manual-guide.com > manual > Documentation
  1   2   3

Copyright 2015 AIA MasterSpec Premium 03/15

PRODUCT MASTERSPEC LICENSED BY ARCOM TO KOHLER CO.


Copyright 2015 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to Kohler Co. ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact Kohler Co., 444 Highland Drive, Kohler, Wisconsin, 53044; Phone: (800) 456-4537.

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.

SECTION 224216.13 - COMMERCIAL LAVATORIES

TIPS:

To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination checklists, click on MasterWorks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

PART 1 - GENERAL

1.1RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

A.Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

1.2SUMMARY

A.Section Includes:

1.Lavatories.

2.Shampoo bowls.

3.Faucets.

4.Supports.

B.Related Requirements:

Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this Section but are specified in other Sections.

1.Section 224100 "Residential Plumbing Fixtures" for residential lavatories.

2.Section 224300 "Medical Plumbing Fixtures" for healthcare lavatories.

3.Section 224600 "Security Plumbing Fixtures" for security lavatories.

1.3ACTION SUBMITTALS

A.Product Data: For each type of product.

1.Include construction details, material descriptions, dimensions of individual components and profiles, and finishes for lavatories.

2.Include rated capacities, operating characteristics, electrical characteristics, and furnished specialties and accessories.

B.Sustainable Design Submittals:

"Product Data" Subparagraph below applies to LEED (including v4), IgCC, ASHRAE 189.1, and Green Globes for fixtures and equipment that consume water.

1.Product Data: For water consumption.

Retain "Shop Drawings" Paragraph below if automatic, electronic-sensor faucets are required for Project.

C.Shop Drawings: Include diagrams for power, signal, and control wiring of automatic faucets.

1.4INFORMATIONAL SUBMITTALS

Retain "Coordination Drawings" Paragraph below if coordination is required for installation of products and materials by separate installers.

A.Coordination Drawings: Counter cutout templates for mounting of counter-mounted lavatories.

1.5CLOSEOUT SUBMITTALS

A.Operation and Maintenance Data: For lavatories and faucets to include in operation and maintenance manuals.

Retain first subparagraph below if automatic, electronic-sensor faucets are required for Project.

1.In addition to items specified in Section 017823 "Operation and Maintenance Data," include the following:

a.Servicing and adjustments of automatic faucets.

1.6MAINTENANCE MATERIAL SUBMITTALS

A.Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.

1.Faucet Washers and O-Rings: Equal to [10] <Insert number> percent of amount of each type and size installed.

2.Faucet Cartridges and O-Rings: Equal to [5] <Insert number> percent of amount of each type and size installed.

PART 2 - PRODUCTS

See Editing Instruction No. 1 in the Evaluations for cautions about named manufacturers and products. For an explanation of options and Contractor's product selection procedures, see Section 016000 "Product Requirements."

Do not use same lavatory designation as is used for another lavatory in Section 224100 "Residential Plumbing Fixtures," Section 224300 "Medical Plumbing Fixtures," and Section 224600 "Security Plumbing Fixtures."

2.1ENAMELED, CAST-IRON, COUNTER-MOUNTED LAVATORIES

Copy "Lavatory" Paragraph below and re-edit for each type of rectangular, flat rim, enameled, cast iron, flush counter mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

A.Lavatory <Insert drawing designation>: Rectangular, flat rim, enameled, cast iron, flush counter mounted.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Kohler Co.; [K-3048-1 and K-3048-8] [K-3049-1 and K-3049-8] [K-3051-1 and K-3051-8] [K-3052-1 and K-3052-8] [K-3053-1 and K-3053-8] Iron Impressions.

2.Fixture:

a.Standard: ASME A112.19.1/CSA B45.2.

b.Type: For flush mounting with kit.

c.Nominal Size: Rectangular, [K-3048-1 and K-3048-8, 25-5/8 by 22-1/4 inches (651 by 565 mm)] [K-3049-1 and K-3049-8, 31-5/8 by 22-1/4 inches (803 by 565 mm)] [K-3051-1 and K-3051-8, 37-5/8 by 22-1/4 inches (956 by 565 mm)] [K-3052-1 and K-3052-8, 43-5/8 by 22-1/4 inches (1108 by 565 mm)] [K-3053-1 and K-3053-8, 49-5/8 by 22-1/4 inches (1260 by 565 mm)].

d.Faucet-Hole Punching: [Single hole] [Three holes, 8-inch (203-mm)] centers.

e.Faucet-Hole Location: Top.

Select one of the three color Subparagraphs below, delete the other two Subparagraphs, and select color.

f.Full Line Color: [White] [Biscuit] [Almond] [Sand Bar] [Dune] [Suede] [Ice Grey] [Mexican Sand] [Cashmere].

g.High Fashion Color: [Sea Salt] [Cane Sugar] [Basalt] [Black 'n Tan] [Black Black] [Thunder Grey].

h.Vapour Color: [Vapour Blue] [Vapour Green].

i.Mounting Materials: Sealant.

3.Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of oval, self-rimming, enameled, cast iron, counter mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

B.Lavatory <Insert drawing designation>: Oval, self-rimming, enameled, cast iron, counter mounted.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Kohler Co.; [K-2905-1, K-2905-4, and K-2095-8 Farmington] [K-5403 Iron Plains Oval] [K-2839-1, K-2839-4, and K-2839-8 Tides] or a comparable product by one of the following:

a.Zurn Industries, LLC.

b.<Insert manufacturer's name>.

2.Fixture:

a.Standard: ASME A112.19.1/CSA B45.2.

b.Type: Self-rimming for above-counter mounting.

c.Nominal Size: Oval, [K-2905, 19-1/4 by 16-1/4 inches (489 by 413 mm)] [K-5403, 20-3/4 by 14-1/4 inches (527 by 362 mm)] [K-2893, 28 by 17 inches (711 by 432 mm)].

d.Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].

e.Faucet-Hole Location: Top.

Select one of the three color Subparagraphs below, delete the other two Subparagraphs, and select color.

a)Full Line Color: [White] [Biscuit] [Almond] [Sand Bar] [Dune] [Suede] [Ice Grey] [Mexican Sand] [Cashmere].

f.High Fashion Color: [Sea Salt] [Cane Sugar] [Basalt] [Black 'n Tan] [Black Black] [Thunder Grey].

g.Vapour Color: [Vapour Blue] [Vapour Green].

h.Mounting Material: Sealant.

3.Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of oval, enameled, cast iron, undercounter mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

C.Lavatory <Insert drawing designation>: Oval, enameled, cast iron, undercounter mounted.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Kohler Co.; [K-2907-4U and K-2907-8U Thoreau] [K-2832 Garamond] [K-2824 Serif] [K-2874 Canvas] or a comparable product by one of the following:

a.<Insert manufacturer's name>.

2.Fixture:

a.Standard: ASME A112.19.1/CSA B45.2.

b.Type: For undercounter mounting.

c.Nominal Size: Oval, [K-2907, 24 by 18 inches (610 by 457 mm)] [K-2832, 21-1/16 by 16-1/8 inches (535 by 410 mm)] [K-2824, 20-5/8 by 15-1/4 inches (524 by 387 mm)] [K-2874, 19-7/16 by 16-1/16 inches (494 by 408 mm)].

d.Faucet-Hole Punching: [No holes] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].

e.Faucet-Hole Location: On countertop.

Select one of the three color Subparagraphs below, delete the other two Subparagraphs, and select color.

a)Full Line Color: [White] [Biscuit] [Almond] [Sand Bar] [Dune] [Suede] [Ice Grey] [Mexican Sand] [Cashmere].

f.High Fashion Color: [Sea Salt] [Cane Sugar] [Basalt] [Black 'n Tan] [Black Black] [Thunder Grey].

g.Vapour Color: [Vapour Blue] [Vapour Green].

h.Mounting Materials: Sealant and undercounter mounting kit.

3.Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

Copy "Lavatory" Paragraph below and re-edit for each type of rectangular, enameled, cast iron, undercounter mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

D.Lavatory <Insert drawing designation>: Rectangular, enameled, cast iron, undercounter mounted.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Kohler Co.; [K-2885-8U Man's Lav] [K-2826 and K-2827 Iron Tones] [K-2890-4U and K-2890-8U Tahoe] [K-5400 Iron Plains] [K-2838 Ledges] or a comparable product by one of the following:

a.<Insert manufacturer's name>.

2.Fixture:

a.Standard: ASME A112.19.1/CSA B45.2.

b.Type: For undercounter mounting.

c.Nominal Size: Oval, [K-2885, 28 by 19 inches (711 by 483 mm)] [K-2826, 24-3/4 by 15-5/8 inches (629 by 397 mm)] [K-2827, 16-3/8 by 15-5/8 inches (416 by 397 mm)] [K-2890, 20 by 18 inches (524 by 473 mm)] [K-5400, 18-9/16 by 15-3/4 inches (471 by 400 mm)] [K-2838, 22-1/2 by 16-1/8 inches (571 by 410 mm)].

d.Faucet-Hole Punching: [No holes] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].

e.Faucet-Hole Location: On countertop.

Select one of the three color Subparagraphs below, delete the other two Subparagraphs, and select color.

a)Full Line Color: [White] [Biscuit] [Almond] [Sand Bar] [Dune] [Suede] [Ice Grey] [Mexican Sand] [Cashmere].

f.High Fashion Color: [Sea Salt] [Cane Sugar] [Basalt] [Black 'n Tan] [Black Black] [Thunder Grey].

g.Vapour Color: [Vapour Blue] [Vapour Green].

h.Mounting Materials: Sealant and undercounter mounting kit.

3.Faucet: <Insert lavatory faucet designation from "Solid-Brass, Manually Operated Faucets" or "Solid-Brass, Automatically Operated Lavatory Faucets" Article>.

2.2VITREOUS-CHINA, COUNTER-MOUNTED LAVATORIES

Copy "Lavatory" Paragraph below and re-edit for each type of rectangular, self rimming, vitreous china, counter mounted lavatory required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each lavatory.

A.Lavatory <Insert drawing designation>: Rectangular, self rimming, vitreous china, counter mounted.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Kohler Co.; [K-2325-1 and K-2325-8 Kathryn] [K-2241-1, K-2241-4, and K-2241-8 Memoirs Classic] [K-2337-1, K-2337-4, and K-2337-8 Memoirs Stately] [K-2991-1, K-2991-4, and K-2991-8 Tresham] [K-2381-1, K-2381-4, and K-2381-8 Kelston] [K-2356-1, K-2356-4, and K-2356-8 Archer] or a comparable product by one of the following:

a.American Standard America.

b.Crane Plumbing, L.L.C.

c.Gerber Plumbing Fixtures LLC.

d.TOTO USA, INC.

e.<Insert manufacturer's name>.

2.Fixture:

a.Standard: ASME A112.19.2/CSA B45.1.

b.Type: Self-rimming for above-counter mounting.

c.Nominal Size: Rectangular, [K-2325, 24 by 19 inches (610 by 483 mm)] [K-2241 and K-2337, 22-3/4 by 18 inches (578 by 457 mm)] [K-2991, 21-13/16 by 16-9/16 inches (554 by 421 mm)] [K-2381, 23-7/16 by 20-11/16 inches (595 by 525 mm)] [K-2356, 22-5/8 by 19-7/16 inches (575 by 494 mm)].

d.Faucet-Hole Punching: [One hole] [Three holes, 2-inch (51-mm) centers] [Three holes, 4-inch (102-mm) centers].

e.Faucet-Hole Location: Top.

Select one of the three color Subparagraphs below, delete the other two Subparagraphs, and select color.

a)Full Line Color: [White] [Biscuit] [Almond] [Sand Bar] [
  1   2   3

Share in:

Related:

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search