This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section


Download 198.69 Kb.
NameThis Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section
page1/6
A typeDocumentation
manual-guide.com > manual > Documentation
  1   2   3   4   5   6

Copyright 2013 AIA MasterSpec Premium 09/13

PRODUCT MASTERSPEC LICENSED BY ARCOM TO WILLOUGHBY INDUSTRIES.


Copyright 2013 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to Willoughby Industries ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact Willoughby Industries, 5105 W 78th Street, Indianapolis, IN 46268; Phone: (800) 428-4065; Fax: (317) 875-0837; Website: www.willoughby-ind.com; Email: willoughby@willoughby-ind.com.

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.

SECTION 224300 - HEALTHCARE PLUMBING FIXTURES

TIPS:

To view non-printing Editor's Notes that provide guidance for editing, click on Masterworks/Single File Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination checklists, click on Masterworks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

PART 1 - GENERAL

1.1RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

A.Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

1.2SUMMARY

A.Section includes the following healthcare fixtures and specialties:

1.Healthcare stainless steel water closets.

2.Flushometer valves.

3.Toilet Seats.

4.Patient care units.

5.Healthcare shower panels.

6.Healthcare solid surface shower bases and wall panel kits.

7.Healthcare shower faucets.

8.Healthcare bathing units.

9.Perineal baths.

10.Bedpan washers.

11.Bedpan washing equipment.

12.Clinic sinks.

13.Plaster sinks.

14.Stainless steel scrub sinks.

15.Hose boxes.

16.Dialysis boxes.

17.Behavioral healthcare lavatory.

18.Bariatric healthcare lavatory

19.Infection control sink.

20.Hydrotherapy whirlpools.

21.Morgue equipment.

B.Related Requirements:

Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this Section but are specified in other Sections.

1.Section 224100 "Residential Plumbing Fixtures" for residential fixtures for use in healthcare facilities, but not requiring special healthcare fixture attributes.

2.Section 224213.13 "Commercial Water Closets" for conventional water closets, flushometer valves, carriers, and seats for use healthcare facilities, but not requiring special healthcare fixture attributes.

3.Section 224213.16 "Commercial Urinals" for urinals for use in healthcare facilities.

4.Section 224216.13 "Commercial Lavatories" for lavatories for use in healthcare facilities, but not requiring special healthcare fixture attributes.

5.Section 224216.16 "Commercial Sinks" for sinks for use in healthcare facilities, but not requiring special healthcare fixture attributes.

6.Section 224223 "Commercial Showers" for showers for use in healthcare facilities, but not requiring special healthcare fixture attributes.

7.Section 224500 "Emergency Plumbing Fixtures" for emergency showers and eye-wash units.

1.3ACTION SUBMITTALS

A.Product Data: For each type of product.

1.Include construction details, material descriptions, dimensions of individual components and profiles, and finishes for fixtures.

2.Include rated capacities, operating characteristics, electrical characteristics, and furnished specialties and accessories.

1.4CLOSEOUT SUBMITTALS

A.Operation and Maintenance Data: For plumbing fixtures and faucets to include in operation and maintenance manuals.

1.In addition to items specified in Section 017823 "Operation and Maintenance Data," include the following:

a.Servicing and adjustments of [flushometer valves] [electronic sensors] [patient care units].

1.5MAINTENANCE MATERIAL SUBMITTALS

A.Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.

1.Faucet Washers and O-Rings: Equal to [10] <Insert number> percent of amount of each type and size installed.

2.Faucet Cartridges and O-Rings: Equal to [5] <Insert number> percent of amount of each type and size installed.

3.Flushometer-Valve Repair Kits: Equal to [10] <Insert number> percent of amount of each type installed, but no fewer than [one] [six] <Insert number> of each type.

PART 2 - PRODUCTS

See Editing Instruction No. 1 in the Evaluations for cautions about named manufacturers and products. For an explanation of options and Contractor's product selection procedures, see Section 016000 "Product Requirements."

2.1HEALTHCARE LIGATURE-RESISTANT STAINLESS STEEL WATER CLOSETS

Copy "Healthcare Ligature-Resistant Stainless Steel Water Closets" Paragraph below and re-edit for each type of healthcare water closet required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare water closet.

A.Healthcare Ligature-Resistant Stainless Steel Water Closets <Insert drawing designation>: Floor mounted, [top] [back] spud rear access waste outlet [floor] [wall].

For top spud applications, use Willoughby AS-FVC Ligature Resistant flush valve cover.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Willoughby Industries; [ASETWS-1490-FM] [ASETWS-1490-FM-HC] [ASETF-1490-FM] [ASETF-1490-FM-HC] or a comparable product by one of the following:

a.Bradley Corp.

b.<Insert Manufacturer's name>.

2.Construction:

a.Standards: ASME A112.19.3/CSA B45.4.

b.Material: 14 GA type 304 stainless steel.

c.Type: Siphon jet.

d.Style: Flushometer valve.

e.Height: [ADA] [Non ADA].

f.Rim Contour: Elongated.

g.Water Consumption: [1.28 gal. (4.8 L)] [1.6 gal. (6 L)] per flush.

h.Spud Size: NPS 1-1/2 (DN 40).

Coordinate "Flushometer Valve" Subparagraph below with "Flushometer Valves" Article. To require conventional flushometer valves on healthcare water closets, cross-reference Section 224213.13 "Commercial Water Closets."

3.Flushometer Valve: <Insert flushometer-valve designation>.

4.Mounting: Floor. Anchor by standard 4-point system. Threaded rods, nuts, and washers furnished. Unit requires chase area for installation and maintenance.

Copy "Healthcare Ligature-Resistant Stainless Steel Water Closets - Front Access" Paragraph below and re-edit for each type of floor-mounted, floor/wall-outlet, healthcare water closet required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare water closet.

B.Healthcare Ligature-Resistant Stainless Steel Water Closets - Front Access <Insert drawing designation>: Floor mounted, [top] [back] spud front access waste outlet [floor] [wall].

For top spud applications, use Willoughby AS-FVC Ligature-Resistant flush valve cover.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Willoughby Industries; [ASETWS-1490-FM-FA] [ASETWS-1490-FM-HC-FA] [ASETF-1490-FM-FA] [ASETF-1490-FM-HC-FA] or a comparable product by one of the following:

a.Bradley Corporation.

b.<Insert Manufacturer's name>.

2.Construction:

a.Standards: ASME A112.19.3/CSA B45.4.

b.Material: 14 GA type 304 stainless steel.

c.Type: Siphon jet.

d.Style: Flushometer valve.

e.Height: [ADA] [Non ADA].

f.Rim Contour: Elongated.

g.Water Consumption: [1.28 gal. (4.8 L)] [1.6 gal. (6 L)] per flush.

h.Spud Size: NPS 1-1/2 (DN 40).

Coordinate "Flushometer Valve" Subparagraph below with "Flushometer Valves" Article. To require conventional flushometer valves on healthcare water closets, cross-reference Section 224213.13 "Commercial Water Closets."

3.Flushometer Valve: <Insert flushometer-valve designation>.

4.Mounting: Floor. Anchor by standard 4-point system. Threaded rods, nuts, and washers furnished. Unit requires no chase area for installation and maintenance.

Copy "Healthcare Bariatric Stainless Steel Water Closets" Paragraph below and re-edit for each type of floor-mounted, back-outlet healthcare water closet required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each healthcare water closet.

C.Healthcare Bariatric Stainless Steel Water Closets <Insert drawing designation>: Floor mounted, [floor] [wall] waste outlet, [top] [back] spud [front] [rear] access.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Willoughby Industries; [BETF-1490-FM-FA] [BETF-1490-FM-FA-10] [BETF-1490-FM-FA-12] [BETW-1490-FM-FA] [BETWS-1490-FM-FA] or a comparable product by one of the following:

a.Bradley Corporation.

b.<Insert Manufacturer's name>.

2.Construction:

a.Standards: ASME A112.19.23CSA B45.4, CSA Z8000, FGI Healthcare Guidelines.

b.Material: 14 GA 304 stainless steel.

c.Type: [Siphon jet] [Blow out].

d.Style: Flushometer valve.

e.Height: ADA.

f.Exterior: White epoxy anti-microbial powder coated.

g.Bowl Interior: Bead blast stainless steel.

h.Fixture Load Rating: 1200 lbs (544 kg).

i.Rim Contour: Elongated [with] [without] bedpan lugs.

j.Water Consumption: [1.28 gal. (4.8 L)] [1.6 gal. (6 L)] per flush.

k.Spud Size: NPS 1-1/2 (DN 40).

Coordinate "Flushometer Valve" Subparagraph below with "Flushometer Valves" Article. To require conventional flushometer valves on healthcare water closets, cross-reference Section 224213.13 "Commercial Water Closets".

3.Flushometer Valve: <Insert flushometer-valve designation>.

Coordinate "Toilet Seat" Subparagraph with "Toilet Seats" Article.

4.Toilet Seat: Standard (1200 lb capacity).

Wall and floor anchoring hardware to be provided by contractor.

5.Mounting: Front anchoring through 2 removable 12 inch (305 mm) by 12 inch (305 mm) removable access panels. Fixture provided with four 3/4 inch (19 mm) carrier wall mounting holes and one floor mounted Z-clip.

2.2FLUSHOMETER VALVES

Willoughby Industries does not manufacture Flushometer Valves.

Caution: Consumption of flushometer valves for healthcare stainless steel water closets must match the fixture consumption. Copy "Lever-Handle, Diaphragm Flushometer Valves" Paragraph below and re-edit for each type of lever-handle, diaphragm flushometer valve with bedpan washer required.

Insert letter and number combination number to complete designation. Use these designations on Drawings to identify each flushometer valve.

A.Lever-Handle, Diaphragm Flushometer Valves <Insert designation>.

1.Basis-of-Design Product: Subject to compliance with requirements, provide Willoughby Industries; Sloan or a comparable product by one of the following:

a.Delany Products.

b.Zurn Industries, LLC.

c.<Insert Manufacturer's name>.

2.Standard: ASSE 1037/ASME A112.1037/CSA B125.37.

3.Maximum Pressure Rating: 125 psig (860 kPa).

4.Features: Integral check stop, backflow-prevention device, and outlet-tube-mounted bedpan washer.

5.Material: Brass body with corrosion-resistant components.

6.Exposed Flushometer-Valve Finish: Chrome plated.

7.Style: [Exposed] [Concealed].

8.Consumption: [1.28 gal. (4.8 L)] [1.6 gal. (6 L)] per flush.

9.Minimum Inlet: NPS 1 (DN 25).

10.Minimum Outlet: NPS 1-1/2 (DN 40), extended length.

B.Hydraulic, Diaphragm Flushometer Valves .

1.Basis-of-Design Product: Subject to compliance with requirements, provide Willoughby Industries; Sloan or a comparable product by one of the following:

a.Delany Products.

b.Zurn Industries, LLC.

c.<Insert Manufacturer's name>.

2.Standard: ASSE 1037/ASME A112.1037/CSA B125.37.

3.Maximum Pressure Rating: 125 psig (860 kPa).

4.Features: Integral check stop, backflow-prevention device, and outlet-tube-mounted bedpan washer.

5.Material: Brass body with corrosion-resistant components.

6.Exposed Flushometer-Valve Finish: Chrome plated.

7.Style: [Exposed] [Concealed].

8.Consumption: [1.28 gal. (4.8 L)] [1.6 gal. (6 L)] per flush.

9.Minimum Inlet: NPS 1 (DN 25).

10.Minimum Outlet: NPS 1-1/2 (DN 40), extended length.

2.3TOILET SEATS

Willoughby Industries does not manufacture Toilet Seats.

Copy "Toilet Seats" Paragraph below and re-edit for each type of toilet seat required.

Insert letter and number combination to complete designation. Use these designations on Drawings to identify each toilet seat.

A.Toilet Seats <Insert designation>.

1.Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a.Centoco Manufacturing Corporation.

b.Church Seats; Bemis Manufacturing Company.

c.Kohler Co.

d.Olsonite Seat Co.

e.Sperzel of Lexington.

f.Zurn Industries, LLC.

g.<Insert Manufacturer's name>.

2.Standard: IAPMO Z124.5.

3.Material: Plastic with antimicrobial agent.

4.Type: [Commercial (standard)] [Commercial (heavy duty)].

5.Shape: Elongated rim, open front.

6.Hinge: Check.

7.Hinge Material: Noncorroding metal.

8.Color: White.

2.4PATIENT CARE UNITS

Copy "Patient Care Units" Paragraph below and re-edit for each type of patient care unit required.

Insert letter and number combination to complete drawing designation. Use these designations on Drawings to identify each patient care unit.

A.Patient Care Units <
  1   2   3   4   5   6

Share in:

Related:

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search