Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic


Download 50.41 Kb.
NameSenior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic
A typeDocumentation
manual-guide.com > manual > Documentation
Richard F. Desouza

Contact : +91 832 2445011 (R), (M) + 91 9833172467 ,9545622477.

E-mail : richard_desouza27@yahoo.co.uk/richard.milroc@yahoo.in




Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic.

Chief Mechanic/ Commissioning Personal/ Roving PMS Maintenance Supervisor / Crane Technician /Barge Mechanic // Asst Subsea/Solid Control Operator/ Rig Mechanic / Marine Mechanic /Coiled Tubing Mechanic. with an Organization of repute




Synopsis




  • A dynamic professional 25 years of rich expertise in Rig Operations.




  • Presently worked as a Installation and Commissioning Mech Engineer / Maintenance Foreman for National Oilwell Varco at Daewoo Marine Shipyard, Samsung and Hyundai shipyards at Goeje Islands , South Korea for Installation and Commissioning all NOV Equipments on 6th Gen UDW Drillships and Semi Subs ie Atwood, Maersk, Enso, QGOG, SeaDrill- Carina -Aquila, Transocean Proteus , Fred Olsen 2 and Pacific Drilling from Jan 2013.



Worked for Saudi Aramco as a KT Specialist ( Mentor/Trainer/Instructor ) from 17th June 2012 and stationed on Land Rigs SAR # 152 ,153, 103 later will be in Charge of Newly Acquired B Class Super Cyber based Jack Up SAR # 202 which will be operating in Saudi Waters.


  • Worked on a short contract for 2 months March 2012 in Johar Baru ,Malaysia and Batam in Indonesia for VMS –Dubai as a Chief Mechanic for Maintenance and Upgrading of four stacked Transocean Rigs ie Nordic, Rig 136, Roger Mowell,and Shelf Explorer for New Client Atlantic Marine Services –Dubai/Netherland.




  • Worked for Dalma Energy LLC as Chief Mechanic from Jan 2011 to Feb 2012 on Mobile Rig 1-PDO Rig 46, Contracted to Petroleum Development of Oman at NIMR field in South Oman. Later transferred to Fahud for the Commissioing and Upgrading of a VFD Land Rig -6 for PETTEP block in North Oman. Presently Commissioning, Upgrading and Maintenance work on Land Rig-4 that is in operation with PDO .




  • Worked for Weatherford Drilling International as a Chief Mechanic from March 2010 till Dec 2010 short period before going overseas, on the Worlds Fastest Drilling Rig, NOV Rapid Rig – 806 (Acclaimed by IADC) at Barmer (Mangla Field) Rajasthan, India. Contract to Crain Energy Pty.




  • Worked at Keppels Fels Shipyard at Singapore from 1st October 2009 to Feb 2010 as Chief Mechanic / Commissioning Engineer for the Commissioning, Operation and Maintenance of a New Amphion based VFD Jack up Rig ‘Great Drill Chitra of Great Ship Global Energy Services India, later dry towed on Heavy lift to India for operations at Mumbai High




  • Worked for Gulf Drilling International as a Chief Mechanic from September 2008 to 15th September 2009 (Amphion based Offshore Jack Up Rig Al Khor for Qatar Gas, North Field).




  • Deft in on – site supervision work over and completion operations, on land and offshore with company and contractor owned drilling rigs.




  • Proficient with the Latest Operations of 5th and 6th Generation Equipments Installed on Rigs such as




  • NOV equipments worked on Mud Pumps 12P 220, TDX 1250, Drawworks

SGD 1250,1400, Hydraracker, Drill Line Spooling Device , KBC and BOP

Gantry Cranes, Hydraulic winches, 20,15,10 and 5 Tons.

    • Nov Hex 240 Mud Pumps and Cooling System, Draw Works of Ads – 10T with Disc Brakes




    • Top Drive : Model NOV –TDX 1250, 4 SA, 5 SA, 10 RR and 8 SA,MH AKER DDM 750 Top Drive, Remote Controlled Bridge Racker System, Can Rig 4017 model




    • National Oil Well SSGS 1400, 1250 – 850, 250 Draw-works, HPS 1000 Top Drive and Joystick Operation.




    • Writh Draw-work, Mud Pump, VFD System & MH Cyber based VFD RIGS.




    • Types of Rigs worked on- Baker /Pacific Class Marine Jack Up Rigs, Friede & Goldman Type Jack Rigs, Keppels Fels Cyber VFD-Amphion based Jack Up Rigs. Semi Submersibiles Rigs , Drillships Japanese and Korean Built , Land Rigs-750 HP, 2000 HP,3000 HP, Mobile Truck Mounted Rigs.




    • Can also work as a Materials Coordinator/ Warehouse man. Conducted inventory and material request for Rig equipments and Engine spares, critical items on drilling equipments in absence of Warehouseman on most Land rigs ,through rig based material computer programme ie RMS, Empac, Star IPS, Sap ,AMOSS ,Gemau programmes.




    • Worked as a Acting Solid Control Operator during the commissioning of the Rigs in Indonesia, Oman Malaysia ,Singapore India, Kuwait, Equitorail Guniea .Worked on various types of Mud Centriguges ,Shale shakers, Desanders ,Desilters, Cyclones, Hydrocyclones and centrifuges ,ie NOV Brandt Mud Centrifuge ,Derrick, Oil Tools ,Kemptron and monitored the operation, also carried out timely Service and Maintenance on the unit . Can work as a full -fledged Solid Control Operator.




    • Cranes Repair and Maintenance Training for Manitowvoc, Terex, Link Belt, and Clyde- Byracrus done at NPCC yard in Abu Dhabi ,UAE.




    • Presently worked from Feb 2014 only on Rebuilding of Mud Pumps and changing out Bull Gears/Crank Shaft / Connecting Rod assembly and Pinnion Shaft of 20 Mud Pumps at Rigs of Ensco, Maersk, Pacific Drilling, QGOG, Sea Drill ,trying to Master the job as a Mud Pump specialist,




    • Job Description of Maintenance Foreman / Supervisor/ PMS Supervisor.




    • Responsible for the Mechanical Maintenance , Operation, Repair of all Plant Equipments,, Such at Caterpillar Engines, Wartsilla Diesel Engines, Fire Systems, AHU’S, Motors , Centrifugal Pumps, Boilers, Chillers,Fuel Systems. Hydraulic Hytorq units, Hydro Jetting and Pigging system etc. Crane maintenance and out sourcing of Equipments.




    • Managing on Site facility Team, Third Party Sub Contractors for ensuring they complete Tasks on time and with Safety standards by following the Permit to work system using , Hot /Cold/ Confined Space Work Permits.




    • Responding to maintenance requests and planned preventive maintenance activities on the Offshore Platforms.




    • Responsible for insuring that all staff and Sub –Contractors response and rectification times are met and repairs are undertaken diligently, with due care and without undue delay.




    • Directly accountable for day to day matters to the Facilities manager / OIM/ Superintendent.




    • To keep up to date with and have an awareness of new products and new improved working methods that can add value by improving quality and reducing of cost.




    • Undertake maintenance surveys and produce reports accurately and concise.




    • Ensuring relevant maintenance parts are sourced and reported in a timely manner to minimize disruption




    • To maintain effective Health and Safety System including of Completion of Tasks assessments and method Statements and Tool Box talks before every shift.




    • To adopt flexible approach to working as required in the business.




    • To open new ideas, understand the need for change and be willing to adapt.




    • To be responsible for personnel presentation, health and physical fitness of the employees/ contractors.




    • Take all possible steps to ensure a safe working environment for myself and others by following good housekeeping procedures At all installations and work places.


Job Description of a Installation & Commissioning Mechanical Engineer,

Maintenance /Workshop Supervisor.

---------------------------------------------------------------------------------------------------

Start up of New Build 6th Gen UDW Drillships and Semi Sub DP Rigs from DSME Shipyards/ Samsung Heavy Industries Shipyard / Hyundai Heavy Industries Shipyard in Goeje Islands and Ulsan in South Korea.
Tasks involve in Commissioning of the Mechanical systems on the Vessels.
FAT and Commissioning of the Main Engines and Aux Equipments.
Fat and Commissioning of the 12PT 220 NOV Mudpumps and Aux Equipments.
Fat and Commissioning of Knuckle Boom Cranes and AHD 1250 Drawworks, TDX and TDS 1250 and 1000 Top Drives.
Start up and Commissioning of Main rig Hydraulic Power unit systems.
Duties include maintenance and repairs on All Rig Equipments.
Trouble shooting of all NOV Hydraulic Equipments.
Set up Daily Maintenance for mechanics and Motormen.
Set up Preventive Maintenance Systems .
Maintain Service Records of all Running Machinery on board the vessel and order of Spares.Etc.


  • Basic knowledge of maintenance for Top Drive System (Varco), Big Foot Iron Rough Neck, Hydra Tong, Hydraulic System on the Rig.




  • Key Skills include :

Strategic Planning Maintenance Instrumentation

Project Management Rig Operations Environment Health & Safety

Budgeting Documentation Installations


  • Major strengths in team building, logistical planning, contract design and implementation, rig design and modification and on-site operational supervision.




  • A dependable, effective, bottom line oriented self-starter who can communicate at any level.



Employment Recital
Since Sep. ’08 with Gulf Drilling International as a Chief Mechanic (Amphion based offshore Jack Up Rig Al Khor for Qatar Gas, North Field).
Oct. ’07 to Aug. ’08 with P.T. Apex Indo Pratma Duta Drilling Contractor as Chief Mechanic (on Jackup Cyber based VFD Rig Soehanah).
May ’07 to Aug. ’07 with O.C.B. Dubai as Rig Mechanic (Ship Yard Project at Hamriya Free on Jack Up Drilling Rig Thule Power which was under going upgrading, refurbishment and conversion to 5th Generation Type) For KCA Duetag Drilling Contractors.
Nov. ’05 to Jan. ’07 with Global Santafe Drilling Corporation, High Island 5; Gabon West Africa as Expact Rig Mechanic International Crew on Semi Sub-Aleutian Key in Trinadad and Tobago,and Semi Sub –Rig 135 in Equitorial Guinea, due to getting in contact with Malaria had to return back.
Aug. ’04 to Nov. ’05 with M/s. Towell Shiv-Vani Oil and Gas Exploration Services in Oman as Senior Mechanic (Newly Acquired ZJ-30, Chinese Drilling and Work Over Rigs) for commissioning on Field.
Sep. ’02 to Jul. ’04 with Schlumberger Drilling Services as Rig Mechanic (Rig 91 and Rig 8, contracted to PDO, Oman).
Nov. ’01 to Aug. ’02 with Willbros Offshore Nigeria Ltd., Nigeria as Barge Mechanic (Offshore Barge WB-82, Contracted for Exxon Mobil, at U BIT and Enang Oilfields in Nigeria). For Pipe Laying and Offshore Satilite Jackect/Platform Shut Down jobs.
May ’00 to Oct. ’01 with NPCC Abu Dhabi U.A.E., Qatar, Iran as a Charge Hand Mechanic / Maintenance Foreman /Tennsioner Operator (Offshore Barges Sep 150, Sep 250, DLB 1000 at Zakum West Super Complex in Qatar at PS 1 and PS2 oilfields and Shutdown Jobs. on WHP’s) Iran at South Pars Field.
Responsibilities :


  • Overseeing, maintaining & repairing :

    • CAT – D 399, CAT 3512, CAT 3516B VM Engine and EMD, Wartisila 6 – SL26, Detroit MTU Engines at Rig Site and Camp.




    • Swivels, BOP’s Well Heads and Pressure Tested Christmas Trees at 20,000 PSI and other equipment as instructed by Rig Superintendent / Chief Mechanic.




    • Mud Pumps i.e. Levco / Varco, National, Oil Well, Gardner Denver, Writh Draw-Work, Mud Pump and VFD Systems.




    • BOP Accumulator, Manifold, Air Pumps, Triplex Pump, Charging of Nitrogen Gas to Accumulated Bottles and Hydraulic Hose Connections to BOP Stack.




    • Air Compressors such as Sullair, Ingersoll-Rand, Atlas Copco & Gardner Denver.




    • Brandt, National Oil Well & Harris Burg Agitator, Mud Centifuge, Shale Shaker & Degasser Unit.




    • Hydraulic Power Unit for Casing Tong and use of Parker Hydraulic Crimping Tool.




    • BJ Hydraulic Pipe Racking System.




    • Breathing Air Compressor and Refilling of SCBA Air Bottles.




    • Forklift, Cranes, Trucks & Other Vehicles.




    • Hydraulic and Pneumatic Systems.




    • Clyde Crane, Manitowoc Crane, American Crances, Intel Garu, Favco Faavalli Cranes. Pipe Lay on Tensioner Systems, Minck and Vulcan Pile Hammers, Clyde Anchor Winches, Smatco Ready Rack Hydraulic System, D-3999 Caterpillar Engines, etc.




    • Hydraulic Hydra Tight Torque Wrenches used on Pig Launcher of 8, 10, 20, 24 & 30” Dia Pipe Line.



  • Carrying out instrumentation job for drillers console to Geolograph Panel from Choke Manifold Unit to Choke Remote Panel.




  • Planning daily activities based on the status of the wells.




  • Directing the work for building the access road and well site.




  • Setting up a schedule for water delivery to the rig.




  • Monitoring the work of all drilling employees and contract employees.




  • Maintaining documentation and paperwork related to the drilling process including pipe tally, cement and casing reports, mileage reports, time sheets, etc.




  • Ensuring plans and procedures are carried out as proposed and that (Employer) safety and environmental policies and procedures are followed on location.




  • Overseeing & directing the activities of service companies to ensure that proper procedures are followed.




  • Monitoring & recording day-to-day drilling activities for compliance with drilling program and handle problems that may arise; record and keep costs to a minimum in all operations.




  • Following guidelines on safety & environmental issues to ensure compliance to standards.




  • Performing stimulation and acidising jobs.




  • Managing the instrumentation from BOP Control House, Rig Floor Dog House to Tool Pusher Control Panel.




  • Completing overall Crown Block, Traveling Block, Draw Work, Mud Pumps & Top Drive System.




  • Utilising High Pressure Jet Pumps at 300 psi for pressure testing of pipeline from wellhead satellites platforms to main gathering platform.





Previous Assignments




Mar. ’97 to Feb. ’00 with Sea & Land Drilling Contractors, Saih Rawl, Oman as Rig Mechanic (Sea and Land Drilling on Rig 96 & Rig 65, and on Coiled Tubing Unit CTU – 20)
Nov. ’94 to Oct. ’96 with Maersk Drilling Contractor, Qatar on Maersk Viking as Asst. Mechanic
Jan. ’92 to Oct. ’94 with Essar Oil & Gas Bombay, India on Offshore Rig ESSAR Explorer and Land Rig 2 in Gujarat as Rig Mechanic
Dec. ‘ 89 to Dec. ’91 with Dual Drilling Co., Bombay as Motorman /

Asst. Mechanic (India)
Dec. ’87 to May ’88 with SEDCO – FOREX, Bombay (Drill Ship Sedco 445) as Maintenance Roustabout



Freelance Assignments




Short Term contracts with Transocean India on Drill ship Discoverer Seven Seas , Burgan Drilling Company, Kuwait on Deep Drill Land Rig-128

Premium Drilling, Malaysia as Rig Mechanic on DD# 3 Cyber based Jack Up Rig.
Made short emergency trips to relive crew members.



Training




Completed Sea Survival course Bosiet from GSMS MARITIME TRAINING INSTITUTE ,MUMBAI ON 13-2-2012, valid till 2016.


  • Completed HUET, Survival at Sea, Fire Fighting, First Aid Courses at Survival Systems India at Mumbai, India valid till 2012.




  • Completed Caterpillar Course on 3516B CAT Engines at Tractors. Singapore Ltd. in October 2009.




  • Undergone BOSIET, EBS Courses approved by (OPITO) SMTC, Petroleum and Maritime Training at Sarawak, Malaysia from 20th August 2007 valid in 21st August 2010.




  • Completed Transocean Sedco Forex and Global Santafe Module Training Programme in Introductory, Safety OJT, Induction OJT, Motor Man / Mechanic OJT, Crane Operator OJT, Confined Space, Elementry First Aid, Fall Protection, Hazardous Material Handling, Pathogens, Permit to Work System, Make Sense, Abrasive Wheels, Manual Handling, & Stop Course.




  • Completed Rig Management System Courses and Vocational Training Programme, SAP Training Programme in Mumbai 2009. Rig Pass Training Programme with Weatherford Drilling, India.




Projects Executed




Supervised and Maintained Operational Duties on ‘Great Drill Chitra, in Singapore, on all equipments, installation of Haliburton Cementing Unit HSS-400, and carried out Stability, Endurance, Jacking Operation Test, during final handover of RIG to Indian Company.
Supervised Dry Dock and Maintenance Projects for Swamp Barges, i.e. Raissa, Maera and Yani at Makassar and Surabaya in Indonesia

Duration : Jan. ’08 to Aug. ‘08
Offshore Jackup Rig High Island 5 in and Cameroon in West Africa, later transferred on a Semi Submersible Rig Aleutian Key in Trinadad and Tobago (West Indies)

Duration : March, ’06 to Dec. ‘06
Semi Submersible Rig 135 in Equitorial Guinea through the IMS Ship Management Agent for GSF, Houston, U.S.A.

Duration : Dec. ’06 to Apr. ’07.




Academia



  • Passed S.S.C.E. in 1978 from Goa Board.




  • Completed Std. XI and XII from reputed College in 1980.




  • ITI / Diploma Course as Mechanical Engineering from Reputed Indian Technical Institute in 1980 to1983 .




  • Pursued Diploma in A/C & Refrigeration from Saint Anthony Technical Institute in 1979.




  • Diploma in Automobile Engineering ,from a Reputed Technical Institute in Goa in 1984.




  • Completed Basic Industrial Hydraulic Course with Parker Hannifinn at Mhape, New Bombay, for three days 4th to 6th Nov 2014. Received Theory and Practicals




  • Completed National Oilwell Varco Course Certificate in Rigging Fundamentals Basic/ Slings/Rigging Hardware/ Type of Hitches/ Basic Rigging Calculations on 3rd Nov 2015 at K@ Training Facility, Goyyang, South Korea.




  • Completed Bosiet ,HUET ,H2S Sea survival courses from Arina Sync Marine Institute,at CBD,Belapur,New Bombay, on 22-2-2016 to 26-2-2016 ,valid for five years.




IT Skills



  • Basic knowledge on Computers Office Management MS Word, Excel & Power Point.





Personal Dossier



Date of Birth : 7th October 1966
Place of Birth : Kuwait
Nationality : Indian
Languages Known : English, French, Portuguese, , Arabic,

Hindi & Marathi
License : Indian Driving License for HMV, Can Operate Forklifts,

Bulldozers .
Mailing Address : Milroc Temple Towers, Block-2, Flat No. F1, Next

to Shantaban Housing Complex, Merces, Chimbel Road,

Merces 403 013, Goa, INDIA
Passport Details : Passport No. Z-1727872 Expiry till 01-09-2019
Permanent Address : Villa Rosa, House No. 2, Gaura Vaddo, Calangute,

Bardez, Goa, INDIA 403 516
Yellow Fever Booklet : Holding valid yellow fever booklet for entry to all

African Countries
Valid Police Clearance

Certificate: : OMAN, KUWAIT, UNITED ARAB EMIRATES, SAUDI

ARABIA..
Valid Visa –for -South Korea.





Share in:

Related:

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconHave Varied Experience of in Project/ Routine Maintenance, Installation,...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconThe Narrative section of each Maintenance (M) procedure is intended...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconTo seek a responsible position as a {Snr qa/qc coating Engineer /...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconThe Network Technician may be responsible for installing, repairing,...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconPosition: hvac mechanic/technician

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconTo work challenging position, instrument engineer/ E&i engineer./E&I...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconB. Manuals for training overseas users and maintenance personnel in Centum cs maintenance

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconPlanning and Prioritizing Environmental Improvements at Maintenance...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconSchedule Waters recommends that performance maintenance visits be...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconSchedule Waters recommends that performance maintenance visits be...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconFuture Technology Devices International (ftdi) is looking to hire...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconInstallation and Maintenance of

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconProfile I am certified in diagnosing and repairing hydraulic and...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconInstallation and Maintenance Guide

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconInstallation and Maintenance Manual

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconDescription Maintenance (zmdr); Remarks feature; Field Maintenance Control (fmc) feature

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconJob Family: 49-0000 Installation, Maintenance and Repair

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconProfile Instrument Technician (Pre-Commissioning)

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconUser friendly gui,convenient usage,safe and reliable operation, easy...

Senior level managerial assignments a Installation and Commissioning Mech Engineer. Maintenance Foreman / Supervisor. Shut Down Maintenance Technician, Hydraulic Mechanic iconThe attendance recording and maintenance. The leave recording and maintenance




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search