This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section


Download 123.83 Kb.
NameThis Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section
page1/3
A typeDocumentation
manual-guide.com > manual > Documentation
  1   2   3

Copyright 2015 AIA MasterSpec Premium 03/15

PRODUCT MASTERSPEC LICENSED BY ARCOM TO PAMEX INC.


Copyright 2015 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to PAMEX Inc. ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact PAMEX Inc., 4680 Vinita CT, Chino, CA, 91710; Phone: 800.621.6869; Fax: 800.838.8307; Website: www.pamexinc.com; Email: sales@pamexinc.com.

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.

SECTION 087100 - DOOR HARDWARE

TIPS:

To view non-printing Editor's Notes that provide guidance for editing, click on MasterWorks/Single-File Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination checklists, click on MasterWorks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

This Section uses the term "Architect." Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

PART 1 - GENERAL

1.1RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

A.Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

1.2SUMMARY

A.Section Includes:

1.Mechanical door hardware for the following:

a.Swinging doors.

b.Sliding doors.

c.Folding doors.

2.Cylinders for door hardware specified in other Sections.

3.Electrified door hardware.

B.Related Requirements:

Retain subparagraphs below to cross-reference requirements Contractor might expect to find in this Section but are specified in other Sections.

1.[Section 064113 "Wood-Veneer-Faced Architectural Cabinets"] [and] [Section 064116 "Plastic-Laminate-Faced Architectural Cabinets"] for cabinet door hardware provided with cabinets.

Coordinate products specified in Part 2 with Division 08 Sections in subparagraphs below. Astragals, silencers, and cylinders can be specified in this Section or with doors and frames.

2.Section 081113 "Hollow Metal Doors and Frames" [for astragals provided as part of labeled fire-rated assemblies] [and] [for door silencers provided as part of hollow-metal frames].

3.Section 081119 "Stainless-Steel Doors and Frames" [for astragals provided as part of labeled fire-rated assemblies] [and] [for door silencers provided as part of stainless-steel frames].

4.Section 081173 "Sliding Metal Fire Doors" for door and track preparation, reinforcement, and motorized operators provided as part of automatic-closing assemblies.

5.Section 081213 "Hollow Metal Frames" [for astragals provided as part of labeled fire-rated assemblies] [and] [for door silencers provided as part of hollow-metal frames].

6.Section 081216 "Aluminum Frames" for door silencers provided as part of aluminum frames.

7.Section 081316.13 "Aluminum Terrace Doors" for entrance door hardware, [except] [including] cylinders.

8.Section 081416 "Flush Wood Doors" for [astragals] [and] [integral intumescent seals] provided as part of labeled fire-rated assemblies.

9.Section 081433 "Stile and Rail Wood Doors" for [astragals] [and] [integral intumescent seals] provided as part of labeled fire-rated assemblies.

10.Section 083113 "Access Doors and Frames" for access door hardware, [except] [including] cylinders.

11.Section 083323 "Overhead Coiling Doors" for door hardware provided as part of overhead coiling door assemblies.

12.Section 083326 "Overhead Coiling Grilles" for door hardware provided as part of overhead coiling grille assemblies.

13.Section 083463 "Detention Doors and Frames" for door silencers provided as part of detention frames.

14.[Section 083473.13 "Metal Sound Control Door Assemblies"] [and] [Section 083473.16 "Wood Sound Control Door Assemblies"] for hinges and gasketing provided as part of sound-rated door assemblies.

15.Section 083513 "Folding Doors" for pulls, latches, hinges, guides, and pivots provided as part of the folding door package.

16.Section 084113 "Aluminum-Framed Entrances and Storefronts" for entrance door hardware, [except] [including] cylinders.

17.Section 084126 "All-Glass Entrances and Storefronts" for entrance door hardware, [except] [including] cylinders.

18.Section 084229.13 "Folding Automatic Entrances" for entrance door hardware, [except] [including] cylinders.

19.Section 084229.23 "Sliding Automatic Entrances" for entrance door hardware, [except] [including] cylinders.

20.Section 084229.33 "Swinging Automatic Entrances" for entrance door hardware, [except] [including] cylinders.

21.Section 084243 "Intensive Care Unit/Critical Care Unit (ICU/CCU) Entrances" for entrance door hardware, [except] [including] cylinders.

22.Section 087113 "Automatic Door Operators" for low-energy power operators and low-energy power-assist operators.

23.Section 087163 "Detention Door Hardware" for hardware for detention doors.

24.Section 102213 "Wire Mesh Partitions" for door hardware for doors in wire mesh partitions, [except] [including] cylinders.

25.Section 102600 "Wall and Door Protection" for plastic door protection units that match wall protection units.

26.Section 133419 "Metal Building Systems" for door hardware, [except] [including] cylinders.

27.Section 134900 "Radiation Protection" for lead-lined astragals provided as part of labeled fire-rated assemblies.

28.Section 281300 "Access Control" for access control devices installed at door openings and provided as part of a security system.

29.Section 281600 "Intrusion Detection" for detection devices installed at door openings and provided as part of an intrusion-detection system.

30.Section 283111 "Digital, Addressable Fire-Alarm System" for connections to building fire-alarm system.

31.Section 283112 "Zoned (DC Loop) Fire-Alarm System" for connections to building fire-alarm system.

1.3ALLOWANCES

Retain products and Work included in this Section that are covered by cash or quantity allowance. Do not include amounts. Insert descriptions of items in Part 2 or 3 to provide information affecting the cost of the Work that is not included under the allowance.

A.Door hardware is part of [Door Hardware Allowance] <Insert allowance>.

1.4COORDINATION

Retain "Floor-Recessed Door Hardware" Paragraph below if required.

A.Floor-Recessed Door Hardware: Coordinate layout and installation with floor construction.

1.Cast anchoring inserts into concrete.

Retain "Installation Templates" Paragraph below for factory-prepared doors and frames.

B.Installation Templates: Distribute for doors, frames, and other work specified to be factory prepared. Check Shop Drawings of other work to confirm that adequate provisions are made for locating and installing door hardware to comply with indicated requirements.

C.Security: Coordinate installation of door hardware, keying, and access control with Owner's security consultant.

D.Electrical System Roughing-In: Coordinate layout and installation of electrified door hardware with connections to power supplies and building safety and security systems.

E.Existing Openings: Where hardware components are scheduled for application to existing construction or where modifications to existing door hardware are required, field verify existing conditions and coordinate installation of door hardware to suit opening conditions and to provide proper door operation.

1.5PREINSTALLATION MEETINGS

Retain "Preinstallation Conference" Paragraph below if Work of this Section is extensive or complex enough to justify a conference.

A.Preinstallation Conference: Conduct conference at [Project site] <Insert location>.

In subparagraph below, insert additional conference participants not mentioned in Section 013100 "Project Management and Coordination" if needed.

1.Conference participants shall include Installer's Architectural Hardware Consultant[ and Owner's security consultant].

Retain "Keying Conference" Paragraph below if keying is extensive or complex.

B.Keying Conference: Conduct conference at [Project site] <Insert location>.

In first subparagraph below, insert additional conference participants not mentioned in Section 013100 "Project Management and Coordination" if needed.

1.Conference participants shall include Installer's Architectural Hardware Consultant[ and Owner's security consultant].

2.Incorporate conference decisions into keying schedule after reviewing door hardware keying system including, but not limited to, the following:

a.Flow of traffic and degree of security required.

b.Preliminary key system schematic diagram.

c.Requirements for key control system.

d.Requirements for access control.

e.Address for delivery of keys.

f.<Insert requirements to suit Project>.

1.6ACTION SUBMITTALS

A.Product Data: For each type of product.

1.Include construction details, material descriptions, dimensions of individual components and profiles, and finishes.

Retain "Shop Drawings" Paragraph below for electrified door hardware.

B.Shop Drawings: For electrified door hardware.

1.Include diagrams for power, signal, and control wiring.

2.Include details of interface of electrified door hardware and building safety and security systems.

Retain "Samples" Paragraph below for single-stage Samples, with a subordinate list if applicable. Retain "Samples for Initial Selection" and "Samples for Verification" paragraphs for two-stage Samples. Revise if Samples are only required for certain products.

C.Samples: For each exposed product in each finish specified, in manufacturer's standard size.

1.Tag Samples with full product description to coordinate Samples with door hardware schedule.

D.Samples for Initial Selection: For each type of exposed finish.

E.Samples for Verification: For each type of exposed product, in each finish specified.

1.Sample Size: Full-size units or minimum 2-by-4-inch (51-by-102-mm) Samples for sheet and 4-inch (102-mm) long Samples for other products.

Retain first subparagraph below unless Samples are delivered to Owner as extra materials.

a.Full-size Samples will be returned to Contractor. Units that are acceptable and remain undamaged through submittal, review, and field comparison process may, after final check of operation, be incorporated into the Work, within limitations of keying requirements.

2.Tag Samples with full product description to coordinate Samples with door hardware schedule.

F.Door Hardware Schedule: Prepared by or under the supervision of Installer's Architectural Hardware Consultant. Coordinate door hardware schedule with doors, frames, and related work to ensure proper size, thickness, hand, function, and finish of door hardware.

1.Submittal Sequence: Submit door hardware schedule [after] [or] [concurrent with] submissions of Product Data, Samples, and Shop Drawings. Coordinate submission of door hardware schedule with scheduling requirements of other work to facilitate the fabrication of other work that is critical in Project construction schedule.

2.Format: Use same scheduling sequence and format[ and use same door numbers] as in door hardware schedule in the Contract Documents.

3.Content: Include the following information:

a.Identification number, location, hand, fire rating, size, and material of each door and frame.

b.Locations of each door hardware set, cross-referenced to Drawings on floor plans and to door and frame schedule.

c.Complete designations, including name and manufacturer, type, style, function, size, quantity, function, and finish of each door hardware product.

Retain first subparagraph below for electrified door hardware.

d.Description of electrified door hardware sequences of operation and interfaces with other building control systems.

e.Fastenings and other installation information.

f.Explanation of abbreviations, symbols, and designations contained in door hardware schedule.

g.Mounting locations for door hardware.

h.List of related door devices specified in other Sections for each door and frame.

G.Keying Schedule: Prepared by or under the supervision of Installer's Architectural Hardware Consultant, detailing Owner's final keying instructions for locks. Include schematic keying diagram and index each key set to unique door designations that are coordinated with the Contract Documents.

1.7INFORMATIONAL SUBMITTALS

Coordinate "Qualification Data" Paragraph below with qualification requirements in Section 014000 "Quality Requirements" and as may be supplemented in "Quality Assurance" Article.

A.Qualification Data: For [Installer] [and] [Architectural Hardware Consultant].

Retain "Product Certificates" Paragraph below to require submittal of product certificates from electrified door hardware manufacturers.

B.Product Certificates: For each type of electrified door hardware.

1.Certify that door hardware for use on each type and size of labeled fire-rated doors complies with listed fire-rated door assemblies.

Retain "Product Test Reports" Paragraph below if retaining "Accessibility Requirements" Paragraph in "Performance Requirements" Article.

C.Product Test Reports: For compliance with accessibility requirements, for tests performed by manufacturer and witnessed by a qualified testing agency, for door hardware on doors located in accessible routes.

Retain "Field quality-control reports" Paragraph below if Contractor is responsible for field quality-control inspecting.

D.Field quality-control reports.

E.Sample Warranty: For special warranty.

1.8CLOSEOUT SUBMITTALS

A.Maintenance Data: For each type of door hardware to include in maintenance manuals.

B.Schedules: Final [door hardware] [and] [keying] schedule.

1.9MAINTENANCE MATERIAL SUBMITTALS

See "Maintenance Materials" Article in the Evaluations for discussion of extra materials.

A.Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.

1.Door Hardware: <Insert detailed descriptions and specific numbers of units>.

2.Electrical Parts: <Insert detailed descriptions and specific numbers of units>.

1.10QUALITY ASSURANCE

A.Installer Qualifications: Supplier of products and an employer of workers trained and approved by product manufacturers and of an Architectural Hardware Consultant who is available during the course of the Work to consult Contractor, Architect, and Owner about door hardware and keying.

1.Warehousing Facilities: In Project's vicinity.

2.Scheduling Responsibility: Preparation of door hardware and keying schedule.

Retain "Engineering Responsibility" Subparagraph below for electrified door hardware.

3.Engineering Responsibility: Preparation of data for electrified door hardware, including Shop Drawings, based on testing and engineering analysis of manufacturer's standard units in assemblies similar to those indicated for this Project.

DHI Architectural Hardware Consultants (AHCs) are not trained in electrified hardware. Electrified Hardware Consultants (EHCs) and Architectural Opening Consultants (AOCs) are trained in electrified hardware; require one of these DHI certifications for projects that include electrified hardware. AOCs are also trained in the construction and application of doors. See the "Door Hardware Consultants" Article in the Evaluations.

B.Architectural Hardware Consultant Qualifications: A person who is experienced in providing consulting services for door hardware installations that are comparable in material, design, and extent to that indicated for this Project and who is currently certified by DHI as an [Architectural Hardware Consultant (AHC)] [Architectural Hardware Consultant (AHC) and an Electrified Hardware Consultant (EHC)] [Architectural Openings Consultant (AOC)].

1.11DELIVERY, STORAGE, AND HANDLING

A.Inventory door hardware on receipt and provide secure lock-up for door hardware delivered to Project site.

B.Tag each item or package separately with identification coordinated with the final door hardware schedule, and include installation instructions, templates, and necessary fasteners with each item or package.

Retain one of two paragraphs below or revise to suit Project. Retain second paragraph for high-security cylinders.

C.Deliver keys to manufacturer of key control system for subsequent delivery to Owner.

D.Deliver keys[ and permanent cores] to Owner by registered mail or overnight package service.

1.12WARRANTY

When warranties are required, verify with Owner's counsel that special warranties stated in this article are not less than remedies available to Owner under prevailing local laws.

A.Special Warranty: Manufacturer agrees to repair or replace components of door hardware that fail in materials or workmanship within specified warranty period.

1.Failures include, but are not limited to, the following:

a.Structural failures including excessive deflection, cracking, or breakage.

b.Faulty operation of doors and door hardware.

c.Deterioration of metals, metal finishes, and other materials beyond normal weathering and use.

Verify available warranties and warranty periods for door hardware units and components.

2.Warranty Period: [Three] <Insert number> years from date of Substantial Completion unless otherwise indicated below:

Retain applicable subparagraphs below.

a.[Electromagnetic] [and] [Delayed-Egress] Locks: [Five] <Insert number> years from date of Substantial Completion.

b.Exit Devices: [Two] <Insert number> years from date of Substantial Completion.

c.Manual Closers: [10] <Insert number> years from date of Substantial Completion.

d.Concealed Floor Closers: [Five] [10] [25] <Insert number> years from date of Substantial Completion.

  1   2   3

Share in:

Related:

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search