General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work


Download 71.94 Kb.
NameGeneral 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work
page1/5
A typeDocumentation
manual-guide.com > manual > Documentation
  1   2   3   4   5

AVANTI SYSTEMS USA - TRANSVERTO MONOBLOCKTM LONG-FORM

PORT CHESTER, NY GUIDE SPECIFICATION




SECTION 10 22 05

GLASS PARTITION SYSTEMS - Transverto MonoblockTM

CSI 3-PART LONG-FORM GUIDE SPECIFICATION USE FOR CONTRACT DOCUMENT (CD) SPECIFICATION ISSUES

EDIT TO SUIT PROJECT

GENERAL

1.1SUMMARY


NOTE: Delete items below not required for project.

A.Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work:

1.Full height double-glazed partition system.

2.Glass doors and door hardware.

3.Integral operable blinds (option)

4.LCD privacy glazing;seeSection 08 88 36

5.Accessories required for a complete working installation.

B.Related Requirements: Drawings and general provisions of the Contract, including General and Supplementary Conditions, Division 01 General Requirements, and the following Divisions 02 through 49 sections apply to this Section:


NOTE: Delete sections below not relevant to this project; add others as required.

1.Section 07 90 00, Joint Protection

2.Section 08 14 00, Wood Doors

3.Section 08 17 53, Integrated Door Assemblies

4.Section 08 17 54, Integrated Door Assemblies - Gigante

5.Section 08 71 00, Door Hardware: Door cylinders

6.Section 08 88 36, Switchable Glass - Lunartm

7.Section 09 21 16, Gypsum Board Assemblies: Adjacent construction for recessed frames and closers

8.Section 10 22 01, Glass Partition Systems - SolareTM

9.Section 10 22 02, Glass Partition Systems - Solare DG

10.Section 10 22 03, Glass Partition Systems - Solare FR

11.Section 10 22 04, Glass Partition Systems - EliteTM

12.Section 10 22 23, Moveable Panel Systems - Movere Timber

13.Section 10 22 27, Operable Glass Partitions - Movere

14.Section 10 22 27.01, Operable Glass Partitions - Movere SG

15.Section 10 22 27.02, Operable Glass Partitions - Movere DG

16.Division 26, Electrical

1.2REFERENCES


NOTE: Delete references from the list below not required by the project.

Gray toned wordingbelow is for your information, delete or hide prior to issuing documents. Add references to Division 01, Section 01 40 00 - Quality Requirements or Section 01 42 00 - References.

A.Reference Standards in accordance with current editions from the following organizations:

1.AAMA. American Architectural Manufacturers Association; www.aamanet.org

a.AAMA 611, Voluntary Specification for Anodized Architectural Aluminum
b.AAMA 2603, Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Architectural Extrusions and Panels
c.AAMA 2604, Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Architectural Extrusions and Panels

2.ADA. Americans with Disabilities Act of 1990; www.ada.gov

a.ADAAG (28 CFR Part 32), Americans with Disabilities Act Accessibility Guidelines

3.ASCE. American Society of Civil Engineers; www.asce.org

a.ASCE 7, Minimum Design Loads for Buildings and Other Structures

4.ANSI. American National Standards Institute; www.ansi.org

a.ICC / ANSI A117.1, Accessible and Useable Buildings and Facilities
b.ANSI A156.1, Standard for Butts and Hinges
c.ANSI A156.4, Standard for Architectural Door Trim
d.ANSI/ASHRAE 55, Thermal Environmental Conditions for Human Occupancy

5.ASTM. ASTM International; www.astm.org

a.ASTM A276, Standard Specification for Stainless Steel Bars and Shapes
b.ASTM B221, Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
c.ASTM C864, Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
d.ASTM C1036, Standard Specification for Flat Glass
e.ASTM C1048, Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT, Coated and Uncoated Glass
f.ASTM C1115, Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
g.ASTM C1172, Standard Specification for Laminated Architectural Flat Glass
h.ASTM E90, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
i.ASTM E119, Standard Test Methods for Fire Tests of Building Construction and Materials
j.ASTM E336, Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
k.ASTM E413, Classification for Rating Sound Insulation

6.BS. British Standard; www.bsigroup.com/en-GB/

a.BS 476-22: Fire tests on building materials and structures; Methods for determination of the fire resistance of non-loadbearing elements of construction
b.BS 5234: Partitions (including matching linings). (1) Code of practice for design and installation; (2) Specification for performance requirements for strength and robustness including methods of test.
c.BS 6180: Barriers in and about buildings. Code of practice.
d.BS EN ISO 10140-2: Acoustics. Laboratory measurement of sound insulation of building elements; Measurement of airborne sound insulation
e.BS EN 13411-3: Terminations for steel wire ropes. Safety Ferrules and ferrule-securing
f.BS EN ISO 140-4: Acoustics. Measurement of sound insulation in buildings and of building elements; Field measurements of airborne sound insulation between rooms
g.BS EN ISO 717-1: Acoustics. Rating of sound insulation in buildings and of building elements; Airborne sound insulation

7.CPSC. U.S. Consumer Products Safety Commission; www.cpsc.gov

a.CPSC 16 CFR 1201, Safety Standard for Architectural Glazing Materials

8.FSC. Forest Stewardship Council; https://ic.fsc.org

a.FSC Certification Procedures

9.GANA.Glass Association of North America; www.glasswebsite.com

a.GANA (GM), GANA Glazing Manual
b.GANA (LGRM), Laminated Glazing Reference Manual
c.GANA Bulletin 01-0300, Proper Procedures for Cleaning Architectural Glass Products

10.ICC. International Code Council; www.iccsafe.org

a.IBC. International Building Code
b.ICC / ANSI A117.1, Accessible and Useable Buildings and Facilities

11.UL. Underwriters Laboratories Inc.; www.ul.org

12.USGBC. United States Green Building Council; www.usgbc.org

  1   2   3   4   5

Share in:

Related:

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconGeneral 1summary note: Delete items below not required for project....

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconGeneral section includes note to specifier delete items below not...

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for the project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for the project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete items below not required for the project

General 1summary note: Delete items below not required for project. A. Section includes, but is not limited to, fabricating, furnishing, delivering, erecting and installing the following work iconNote to specifier delete, add items below not required for project




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search