1Production Overview 1Production Description


Download 111.44 Kb.
Name1Production Overview 1Production Description
A typeScript
manual-guide.com > manual > Script



rectangle 19rectangle 18rectangle 21rectangle 21IT82 Indoor Monitor User Manual

Content

1 Production Overview 4

1.1 Production Description 4

1.2 Technical Specification 5

1.3 Button Instruction 5

1.4 Dimension 6

1.5 Equipment Appearance And Interface Description 9

1.6 Installation 10

1.7 Installation Considerations 13

1.8 Equipment Packaging 14

2 Setting 15

2.1 Main interface instruction 15

2.2 Network 16

2.2.1 DHCP 16

2.2.2 Static IP 17

2.3 Register Account 18

2.4 Display 21

2.4.1 Brightness 21

2.4.2 Sleep 21

2.5 Sound 22

2.5.1 Sound 22

2.5.2 Call Ringtone Vibrate 22

2.5.3 System 23

2.6 Time 24

2.7 DND Setting 25

2.8 Language 26

2.9 System 27

2.9.1 Reboot 27

2.9.2 Screen clean 27

2.9.3 Format The SD Card 28

2.10 Backup 28

3 Function 30

3.1 Make a call 30

3.1.1 Call SIP 30

3.1.2 Call resident 31

3.1.3 Call from Call Log 32

3.1.4 Call from Contacts 33

3.1.5 Call DoorPhone 34

3.1.6 Call Center 35

3.2 Receive a call 35

3.3 Answer a call 36

3.4 Reject a call 38

3.5 Contacts 39

3.5.1 New contacts 39

3.5.2 Modify the contact 40

3.5.3 Delete the contact 40

3.6 Call log 41

3.6.1 Modify the call log 41

3.6.2 Delete the log 42

3.7 Capture 42

3.8 DND 43

3.9 Auto Answer 43

3.10 Message 44

3.10.1 Alarm 44

3.10.2 Message 44

3.10.3 Maintenance 45

3.11 Live View 45

3.12 Unlock 46

3.13 SOS 47

3.14 Security 48

3.15 System Advanced 49

3.15.1 SSH console 49

3.15.2 Upgrade 49

3.16 Upgrade 50

1Production Overview

1.1Production Description





IT82 is an Android SIP-based with smooth touch-screen Indoor monitor. It can be connected with Akuvox door phone for unlock and monitor. Residents can communicate with visitors via audio and video call, and support remote unlock the door. It is more convenient and safe for residents to check the visitor identity through its video preview function. IT82 is often applicable in villas , apartments, building and so on


1.2Technical Specification


Model

IT82

Graphic Display

  • 7 inch capacitive touch screen TFT LCD, 1024x600 resolution, 16:9 wide screen aspect ratio

Network Protocol

  • SIP RFC3261,TCP/UDP/IP,RTP

Voice Codec

  • G.711A/U, G.729, G.722, iLBC_13_3, iLBC_15_2,OPUS

Video Codec

  • H.264, H.263,H.265,MJPEG

Network Interface

  • Dual switched 10/100Mbps port

IP assignment

  • Static IP, DHCP

Memory

  • RAM:2GB, Flash:4GB

Management

  • LCD Menu Configuration, WebUI

Dimension

  • 232x160x21mm

Storage

  • Album

  • External SD device


1.3Button Instruction


Interface

Description




Manage center button. Click to make a call with manage center.




Message button. Click to direct access to message interface.




Monitor button. Click to view the monitoring from outdoor environment.




Intercom button. Click to enter the dialing interface.




Unlock sensor button. The physical Unlock key is only used for E10S now.




1.4Dimension









1.5Equipment Appearance And Interface Description







Interface

Description

8 PIN connector



For power supply and 485 connector

10PINconnect




For 8 security connector

Ethernet 1

Network interface can be connected to a hub, switch or other network access devices.

Ethernet 2

Share the network access from ethernet 1 port, and for PC and other equipment connection.



1.6Installation





Use the pencil to mark 4 fixation holes through wall bracket on the wall

Use a 5mm hand drill to make the 4 fixation holes on the wall
自选图形 10

自选图形 11


Once the fixation holes are made, insert the four expansion anchors provided
自选图形 15
Use 4 ST4X20 screws to fix the wall bracket in the wall

D自选图形 17evice Mounting



1.7Installation Considerations


Here are some safety recommendations about the installation and the usage:

  • Do not use this product near water, such as: bath, washbasin, kitchen sink and other damp places and so on.

  • Place the device in a place away from heat.

  • Place the device away from traffic areas to prevent collisions.

  • Please use the equipment with the matching power adapter or POE.


1.8Equipment Packaging


Name

Quantity

IT82

1

Wall bracket

1

Quick Start Guide

1

10 Pin cable

1

8 Pin cable

1

Expansion anchor

4

ST4x20 screw

4

2Setting

2.1 Main interface instruction


It82 supports two pages of main interface. Click the corresponding area to operate.






2.2 Network

2.2.1 DHCP


IT82 use DHCP mode to get IP address by default. Please go to Setting-Advanced(password:123456)-Network

Choose DHCP,press CONFIRM, the phone will get IP address automatically.



2.2.2 Static IP


Select Static IP in LAN Type. Enter the IP address parameters in the corresponding area.



Parameter

Specification

IP address

set the IP address of the device

Subnet Mask

set the subnet mask of the device

Gateway

set the default gateway

DNS 1

set the DNS address

DNS 2

set the backup DNS address

2.3 Register Account


SIP account is provided by SIP server. Go to Setting-Advanced-Sip Account . Please consult administrator about sip server information.






Fill the parameters in the corresponding area. Click CONFIRM to save.

Parameter

Specification

Register Name

SIP Account ID provided by ISP

User Name

SIP User Name provided by ISP

Password

SIP Password provided by ISP

Display Name

SIP Display name

Reg Server IP

SIP Register Server, format: domain/IP, for example: 194.168.1.2

Reg Server Port

The default port is 5060.



2.4 Display

2.4.1 Brightness


the point left or right to adjust the screen brightness, click CONFIRM to save.

2.4.2 Sleep


Choose the sleep time from 15 seconds to Never. IT82 setup 1minute by default. After the sleep time without any operation, the phone will black screen. Touch it to wake up.



2.5 Sound

2.5.1 Sound


Slide the point right or left to adjust the Ring / Talk/Tone Volume.

2.5.2 Call Ringtone Vibrate


To setup the Phone Ringtone and Default Notification Sound from the list.

2.5.3 System


Enable or disable the Touch Sounds.


2.6 Time


Setup the date and time in the corresponding area.

Enable Automatic Date Time , the phone will get the Date and Time automatically.

If you uncheck Automatic Date Time, users need to setup the Date and Time manually.

Users can also select the suitable Time Zone and use 24-Hour format.


2.7 DND Setting


This function is used to prevent the phone from disturbing. Go to Setting-DND. if open DND, external phone call is unable to call in, turned off by default.

  1. Select the desired account

  2. Enable/Disable DND function

  3. Select valid time of DND. If you don’t enable the Time, use All day by default.

  4. Choose the return code when DND mode , different mode will send back different message to the server.

  5. DND On/Off Code , different server support different On/Off Code. This code is used to enable or disable DND function from SIP server.


2.8 Language


Choose the suitable phone language. IT82 use English by default.


2.9 System

2.9.1 Reboot


To reboot the device ,click OK when you see the prompt. The phone will reboot.

2.9.2 Screen clean


This function is used to protect the device from being pressed any keys when users clean the screen.

2.9.3 Format The SD Card


Click it to format the internal SD Card.



2.10 Backup


Go to Advance-Reset. Choose the Reset mode,click CONFIRM when you see the prompt. The phone will reset to factory setting automatically.




3Function

3.1Make a call


User can directly dial from the soft keypad, select from the contact list or from call log to call out the number.

User can choose one of the following steps to enter the dialing interface.

Mode 1: Click Call icon on the main screen.

Mode 2: Click Intercom button .

3.1.1 Call SIP


If you want to call sip number, you can select Call SIP label. Click the sip number to make a call. The more information about sip account please consult administrator.


3.1.2 Call resident


If you want to call room number, you can select Call Resident label. For example, if you want to call community 1, Building 1, Unit 1, Floor 1, Room1, you can input digits “001001010101”. Shown as below.


3.1.3 Call from Call Log


User can enter the call log page to make a call.

  1. In the dialing interface->click Call Log label-> select All Calls/Missed Calls .

  2. Click Missed Call icon to enter call log interface.

If you want to make an audio call, click Audio Call icon . If you want to make a video call, click Video Call .



3.1.4 Call from Contacts


User can enter phonebook interface to make a call.

Mode 1: Directly click Contact icon .

Mode 2: Click Call icon -> click PhoneBook label.

If you want to make an audio call, click Audio Call icon . If you want to make a video call, click Video Call .

Contact is shown as below:


3.1.5 Call DoorPhone


If you want to call door phone number, click Call DoorPhone label to call out.

  • Go to the path: Setting-> Advance( default password: 123456)->Door Station-> click Door Station Number to enter the door number.

  • After setup the door phone number, users can call out the Door Phone directly. Click Cancel -o end the call.



3.1.6 Call Center


If you want to call management center (SDMC system), you can press to make a call out. This function only can be used when IT82 has registered from SDMC


3.2Receive a call


Incoming calls include audio and video calls. If the caller has been stored in the contacts, it will show the contact name, otherwise the caller number will be displayed. When IT82 received the video call, it can automatically get a screenshot and save it in the Album.


3.3Answer a call


  1. Answer a audio call

Click Answer to answer the call, press “+/-” to adjust the ringtone volume. As shown below:




  1. Answer a video call

When receiving an video call, the phone will automatically open the video preview so that resident can view the visitors identity. Press Answer o answer the call. As shown below:


3.4Reject a call


If user want to reject a call, click Reject label in incoming interface.

3.5Contacts

3.5.1 New contacts


  1. Click Add button

  2. Enter the name

  3. Select the number type, and enter the parameters in the corresponding area.

  4. Click CONFIRM to save.



3.5.2 Modify the contact


  1. Hold the exited contacts, it will show up a prompt box.

  2. Choose Edit

  3. Then modify the contact you need.

  4. Click CONFIRM to save.

3.5.3 Delete the contact


  1. Hold the exited contacts, it will show up a prompt box

  2. If you choose Delete and Confirm, you will delete the current contact.

  3. If you choose Delete All, all exited contacts will be removed.



3.6Call log


Missed call: click Missed call icon, to check all missed call

All Call: to check all missed call, dialed call.


3.6.1 Modify the call log


  1. Click the call log, users can make the new contact from the log or add the call log into the exited contact.

  2. Click the call log, and press SMS button, edit the message and send out.

  3. Or click video or audio call to call out from contact.


3.6.2 Delete the log


Press delete button ,then choose which log you want to delete. Click COMFIRM to remove it.

3.7Capture


IT82 supports capture the visitor photo when incoming preview. IT82 can auto capture if the phone can not be answered after 3 seconds. Or user can capture manually via press capture icon

3.8DND


Click DND icon to enable or disable DND function. The concrete configuration of DND ,please refer to chapter

3.9Auto Answer


Enable Auto Answer function, IT82 will answer the incoming call automatically.

  1. Go to the path: Setting-Advanced-Sip Account

  2. Tick Auto Answer

  3. Click CONFIRM

矩形 18

3.10 Message


Note:This function only can be used when IT82 registered from SDMC(Management center)

3.10.1Alarm


When the alarm is triggered , users can check the alarm message in this area.

3.10.2Message


Users can receive and send the message in the message interface

3.10.3Maintenance


Any parts of your house is broken, users can select the corresponding item, then to send the message to the management center. More information of SDMC ,please consult your administrator.

3.11 Live View


Live view is used to monitor the door phone via using RTSP.

  1. Click Add

  2. Enter the door phone RTSP address.(please make sure the address format is right)

  3. Click CONRIM to save.

Then users can check the live video from the door phone any time.


3.12 Unlock


IT82 supports remote unlock the door phone via using DTMF code. During the call, users can press Open Lobby label to open the door during the call.

Note: IT82 default DTMF code is #. Users need to predefine the same DTMF code of door phone and IT82. Configuration DTMF code,please consult your administrator.


3.13 SOS


SOS key is used to call out the emergency number in case of emergency. IT82 will call out for three predefined numbers in a loop, each number will be called for 60s (by default).

  1. Go to Setting-Advanced-SOS

  2. Set up 3 emergency number.

  3. Setup the call Timeout

  4. Set up the loop time

  5. Click CONFIRM to save


3.14 Security


IT82 support connect 10 alarm area via using RS485 contacts. Up to 5 Alarm Type - Infrared, Drmagnet, Smoke,Gas and Urgency and two trigger mode - NC(normal close) and NO(normal open) . Setup alarm delay, the alarm will ringing after the alarm has been triggered. Open or close Alarm Status to enable or disable this function.



When the alarm is triggered, click Cancel and input “0000” to disable it.



3.15 System Advanced

3.15.1SSH console


This function is used to connect SSH to debug the device configuration. Only tick this function, the device can be connected.

3.15.2Upgrade


Use the SD card to upgrade the firmware. Please refer to chapter 3.16.



3.16 Upgrade


IT82 supports two types to update the new firmware.

1. Upgrade by SD card

Copy the firmware to SD card. Insert the card into IT82. Go to the path: Setting-System Advanced-System update . Click SELECT OTHER UPGRADE PACKAGE, then find the firmware in SD card, click OK then begin to upgrade.

2. Upgrade by website

Login in the website, go to the path: Upgrade-Basic. Select the firmware then click Submit.







Share in:

Related:

1Production Overview 1Production Description iconBusiness Process Description Overview

1Production Overview 1Production Description iconThis document covers the functional description, specification and...

1Production Overview 1Production Description iconIntroduction 5 0 Overview 5 1 System Structure 5 2 General Components Overview digimic mini 6

1Production Overview 1Production Description iconHistorical overview Before examining birth in the second part of...

1Production Overview 1Production Description iconIntroduction 5 0 Overview 5 1 System Structure 5 2 General Components Overview 6

1Production Overview 1Production Description icon1. 0 Overview 6 1 System Structure 6 2 General Components Overview 7

1Production Overview 1Production Description iconChapter 1: Introduction and Overview Overview

1Production Overview 1Production Description iconProduct Overview 6 Questions and Answers 13 SmartStart Scripting...

1Production Overview 1Production Description icon1 Overview 4 1 firn mission Statement 4 2 firn network Operations...

1Production Overview 1Production Description iconI. Overview

1Production Overview 1Production Description iconLesson overview

1Production Overview 1Production Description iconInstallation Overview

1Production Overview 1Production Description iconLab Overview

1Production Overview 1Production Description iconOverview of mufins

1Production Overview 1Production Description iconSystem Overview

1Production Overview 1Production Description iconChapter Overview

1Production Overview 1Production Description iconCertification Overview

1Production Overview 1Production Description iconOverview Introduction

1Production Overview 1Production Description iconOverview Preface

1Production Overview 1Production Description iconEqualizertm overview




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search