Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 )


Download 14.52 Kb.
NameVelox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 )
A typeTest
manual-guide.com > manual > Test
Velox 2.3.0.522 SW Patch for Vx.SharedStageTest.dll (Requires installation of Velox 2.3.0)

April 3rd, 2018

Effectivity: All stations
The Vx.SharedStageTest.dll and the Compensation.exe from this patch fix the issues associated with SCRs 15593 and 15594 (see description section below).

Installation Instructions:

To apply the patch on non-Elite systems, perform the following steps:

· Shutdown Velox

· Unzip the patch to get the two files:

o Vx.SharedStageTest.dll

o Compensation.exe

· Move the files to C:\Program Files (x86)\Cascade Microtech\Velox

o Replace the existing files, if required.
To apply the patch on Elite systems, perform the following steps:

· Shutdown Velox

· Unzip the patch to get the two files:

o Vx.SharedStageTest.dll

o Compensation.exe

· Move the files to C:\Program Files\Cascade Microtech\Velox

o Replace the existing files, if required.

Description of the fixed bugs
SCR15593:
Shared stage test: Linear action* reads wrong end position after user dialog.
(Y position is assigned to x position.)
*: This action is used for linear / orthogonal / rotation compensation.

This occurs in
- in manual mode or
- in automatic mode, when automatic set wasn't successful
after dialog/request (to move to end position).

Effect:
Scaling result might/will be large (>100µm over 100.000µm).

Workaround:
Use the automatic mode with enabled 'skip on error' option in compensation tool.
When dialog shows on setting end position (automatic detection by find feature failed) abort the compensation and try again with proper find feature settings.
SCR15594:
Setting the anchor position manually doesn't read/use y start position. Y start position is zero and therefore y anchor offset is always equal to set y position (in the case below).

This occurs in
- in manual mode or
- in automatic mode, when automatic set wasn't successful
after dialog/request (to move to reference mark on the current die).

Effect:
Anchor y offset is calculated incorrect. All offsets afterwards will become erroneous in y direction.

Workaround:

In manual mode: Set home position again (e.g. via ControlCenter) after finishing anchor position dialog.
Use automatic mode.
When dialog shows on setting anchor (automatic detection by find feature failed) abort the compensation/test and try again with proper find feature settings.

Share in:

Related:

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconInstallation guide kernel Patch xu 0*337

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconAbstract The high level of technology currently available in the...

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconFixSchedulerDll dll 520,326 12/28/2005

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconScripting dll 221,260 07/24/2003

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconValid as of bw 0b server Patch 13

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconDirectory after you install 32-bit dll driver for Windows 95/NT

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconPat Farrell Phone: (858) 522-6122 e-mail: Patrick. Farrell@hii-amsec com

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconApplication note #2 Using the ez-gseal pressure Controller for Whole...

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconInstallation On the installation of the hssb drivers, Ncboot32. exe...

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconInstallation On the installation of the hssb drivers, Ncboot32. exe...

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) icon*For best range and video link stability we recommend using circular-polarized,...

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) icon* ReportWorks requires 2008R2 or later

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) icon* ReportWorks requires 2008R2 or later

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconAttachment g – Requires Resolution by the Commission

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconRequires two-thirds majority vote (§§ 1, 3)

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconPre-installation and Installation Tasks Minimum System Requirements

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconD-link di-704 Quick Installation Guide Hardware Installation

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconUser Manual This product requires a security code to activate it

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) icon1. 2 Check installation space and installation location intension 1

Velox 3 522 sw patch for VX. SharedStageTest dll (Requires installation of Velox 0 ) iconCreating driver Installation Diskettes for installation on another machine




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search