This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section


Download 205.3 Kb.
NameThis Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section
page1/6
A typeDocumentation
manual-guide.com > manual > Documentation
  1   2   3   4   5   6

Copyright 2013 AIA MasterSpec Premium 09/13

PRODUCT MASTERSPEC LICENSED BY ARCOM TO HAGER COMPANIES.


Copyright 2013 by The American Institute of Architects (AIA)

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to Hager Companies ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact Hager Companies, 139 Victor St. Saint Louis, MO 63104; Phone: (800) 325-9995; Fax: (800) 782-0149; Website: www.hagerco.com; Email: jcohrs@hagerco.com.

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.

SECTION 087100 - DOOR HARDWARE

TIPS:

To view non-printing Editor's Notes that provide guidance for editing, click on Masterworks/Single File Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination checklists, click on Masterworks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

This Section uses the term "Architect." Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed.

Read the "Writing Guide" Article in the Evaluations before editing this Section.

PART 1 - GENERAL

1.1RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

A.Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

1.2SUMMARY

A.Section includes:

1.Mechanical door hardware for the following:

a.Swinging doors.

b.Sliding doors.

c.Folding doors.

2.Electrified door hardware.

B.Related Sections:

Retain Sections in subparagraphs below that contain requirements Contractor might expect to find in this Section but are specified in other Sections.

Coordinate products specified in Part 2 of this Section with Division 08 subparagraphs below. Astragals, silencers, and cylinders can be specified in this Section or with doors and frames.

1.Section 081113 "Hollow Metal Doors and Frames" [for astragals provided as part of labeled fire-rated assemblies] [and] [for door silencers provided as part of hollow-metal frames].

2.Section 081119 "Stainless-Steel Doors and Frames" [for astragals provided as part of labeled fire-rated assemblies] [and] [for door silencers provided as part of stainless steel frames].

3.Section 081216 "Aluminum Frames" for door silencers provided as part of aluminum frames.

4.Section 081416 "Flush Wood Doors" for [astragals] [and] [integral intumescent seals] provided as part of labeled fire-rated assemblies.

5.Section 081433 "Stile and Rail Wood Doors" for [astragals] [and] [integral intumescent seals] provided as part of labeled fire-rated assemblies.

6.Section 083113 "Access Doors and Frames" for access door hardware, [except] [including] cylinders.

7.Section 083323 "Overhead Coiling Doors" for door hardware provided as part of overhead door assemblies.

8.Section 083326 "Overhead Coiling Grilles" for door hardware provided as part of overhead grille assemblies.

9.Section 083463 "Detention Doors and Frames" for door silencers provided as part of detention frames.

10.Section 083473.13 "Metal Sound Control Door Assemblies" and Section 083473.16 "Wood Sound Control Door Assemblies" for hinges and gasketing provided as part of sound-rated door assemblies.

Retain first option in first two subparagraphs below if hardware products are furnished under this Section and are installed by the entrance system manufacturer. Delete first option if hardware is specified with the entrance system.

11.Section 084113 "Aluminum-Framed Entrances and Storefronts" for [installation of] entrance door hardware, except cylinders.

12.Section 084126 "All-Glass Entrances and Storefronts" for [installation of] entrance door hardware, except cylinders.

13.Section 084229.13 "Folding Automatic Entrances" for entrance door hardware, except cylinders.

14.Section 084229.23 "Sliding Automatic Entrances" for entrance door hardware, except cylinders.

15.Section 084229.33 "Swinging Automatic Entrances" for entrance door hardware, except cylinders.

16.Section 084243 "Intensive Care Unit/Critical Care Unit (ICU/CCU) Entrances" for entrance door hardware, except cylinders.

17.Section 087163 "Detention Door Hardware" for hardware for detention doors.

18.Section 102213 "Wire Mesh Partitions" for door hardware for doors in wire mesh partitions, except cylinders.

19.Section 102600 "Wall and Door Protection" for plastic door protection units that match wall protection units.

20.Section 133419 "Metal Building Systems" for door hardware, except cylinders.

21.Section 134900 "Radiation Protection" for lead-lined astragals provided as part of labeled fire-rated assemblies.

22.Section 281300 "Access Control" for access control devices installed at door openings and provided as part of a security system.

23.Section 281600 "Intrusion Detection" for detection devices installed at door openings and provided as part of an intrusion-detection system.

24.Section 283111 "Digital, Addressable Fire-Alarm System" for connections to building fire-alarm system.

25.Section 283112 "Zoned (DC Loop) Fire-Alarm System" for connections to building fire-alarm system.

1.3DOOR HARDWARE ALLOWANCE

Retain this article if products and work included in this Section are covered by cash or quantity allowance. Do not include amounts. Insert descriptions of items in Part 2 or Part 3 to provide information affecting the cost of the Work that is not included under the allowance. See "Door Hardware Allowance" Article in the Evaluations.

A.Furnish door hardware as part of [Door Hardware Allowance] <Insert allowance>.

1.4ACTION SUBMITTALS

A.Product Data: For each type of product indicated. Include construction and installation details, material descriptions, dimensions of individual components and profiles, and finishes.

Retain first paragraph below for electrified door hardware.

B.Shop Drawings: Details of electrified door hardware, indicating the following:

1.Wiring Diagrams: For power, signal, and control wiring and including the following:

a.Details of interface of electrified door hardware and building safety and security systems.

Retain four subparagraphs below if electrified door hardware is complex. If only electromagnetic locks and electric strikes are required, this level of detail might not be necessary.

b.Schematic diagram of systems that interface with electrified door hardware.

c.Point-to-point wiring.

d.Risers.

e.Elevations doors controlled by electrified door hardware.

2.Operation Narrative: Describe the operation of doors controlled by electrified door hardware.

Retain first paragraph below for plastic protective trim units if colors are not specified or scheduled.

C.Samples for Initial Selection: For plastic protective trim units in each finish, color, and texture required for each type of trim unit indicated.

D.Samples for Verification: For exposed door hardware of each type required, in each finish specified, prepared on Samples of size indicated below. Tag Samples with full description for coordination with the door hardware schedule. Submit Samples before, or concurrent with, submission of door hardware schedule.

1.Sample Size: Full-size units or minimum 2-by-4-inch (51-by-102-mm) Samples for sheet and 4-inch (102-mm) long Samples for other products.

Retain subparagraph below unless Samples are delivered to Owner as extra materials.

a.Full-size Samples will be returned to Contractor. Units that are acceptable and remain undamaged through submittal, review, and field comparison process may, after final check of operation, be incorporated into the Work, within limitations of keying requirements.

E.Other Action Submittals:

1.Door Hardware Schedule: Prepared by or under the supervision of Installer, detailing fabrication and assembly of door hardware, as well as installation procedures and diagrams. Coordinate final door hardware schedule with doors, frames, and related work to ensure proper size, thickness, hand, function, and finish of door hardware.

a.Submittal Sequence: Submit door hardware schedule [after] [or] [concurrent with] submissions of Product Data, Samples, and Shop Drawings. Coordinate submission of door hardware schedule with scheduling requirements of other work to facilitate the fabrication of other work that is critical in Project construction schedule.

Retain one of first two subparagraphs below.

b.Format: Comply with scheduling sequence and vertical format in DHI's "Sequence and Format for the Hardware Schedule." Double space entries, and number and date each page.

c.Format: Use same scheduling sequence and format[ and use same door numbers] as in the Contract Documents.

d.Content: Include the following information:

1)Identification number, location, hand, fire rating, size, and material of each door and frame.

2)Locations of each door hardware set, cross-referenced to Drawings on floor plans and to door and frame schedule.

3)Complete designations, including name and manufacturer, type, style, function, size, quantity, function, and finish of each door hardware product.

Retain first subparagraph below for electrified door hardware.

4)Description of electrified door hardware sequences of operation and interfaces with other building control systems.

5)Fastenings and other pertinent information.

6)Explanation of abbreviations, symbols, and codes contained in schedule.

7)Mounting locations for door hardware.

8)List of related door devices specified in other Sections for each door and frame.

2.Keying Schedule: Prepared by or under the supervision of Installer, detailing Owner's final keying instructions for locks. Include schematic keying diagram and index each key set to unique door designations that are coordinated with the Contract Documents.

1.5INFORMATIONAL SUBMITTALS

Coordinate first paragraph below with qualification requirements in Section 014000 "Quality Requirements" and as supplemented in "Quality Assurance" Article.

A.Qualification Data: For [Installer] [and] [Architectural Hardware Consultant].

Retain first paragraph below for electrified door hardware.

B.Product Certificates: For electrified door hardware, from the manufacturer.

1.Certify that door hardware approved for use on types and sizes of labeled fire-rated doors complies with listed fire-rated door assemblies.

Retain first paragraph below if retaining "Accessibility Requirements" Paragraph in "Quality Assurance" Article.

C.Product Test Reports: For compliance with accessibility requirements, based on evaluation of comprehensive tests performed by manufacturer and witnessed by a qualified testing agency, for door hardware on doors located in accessible routes.

D.Warranty: Special warranty specified in this Section.

1.6CLOSEOUT SUBMITTALS

A.Maintenance Data: For each type of door hardware to include in maintenance manuals. Include final [hardware] [and] [keying] schedule.

1.7MAINTENANCE MATERIAL SUBMITTALS

A.Furnish extra materials that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.

See "Extra Materials" Article in the Evaluations for discussion of extra materials.

1.Door Hardware: <Insert detailed descriptions and specific numbers of units>.

2.Electrical Parts: <Insert detailed descriptions and specific numbers of units>.

1.8QUALITY ASSURANCE

A.Installer Qualifications: Supplier of products and an employer of workers trained and approved by product manufacturers and an Architectural Hardware Consultant who is available during the course of the Work to consult with Contractor, Architect, and Owner about door hardware and keying.

1.Warehousing Facilities: In Project's vicinity.

2.Scheduling Responsibility: Preparation of door hardware and keying schedules.

Retain subparagraph below for electrified door hardware.

3.Engineering Responsibility: Preparation of data for electrified door hardware, including Shop Drawings, based on testing and engineering analysis of manufacturer's standard units in assemblies similar to those indicated for this Project.

B.Architectural Hardware Consultant Qualifications: A person who is experienced in providing consulting services for door hardware installations that are comparable in material, design, and extent to that indicated for this Project and who is currently certified by DHI as follows:

DHI has four certification designations: Architectural Hardware Consultant (AHC); Certified Door Consultant (CDC); Electrified Hardware Consultant (EHC), and Architectural Opening Consultant (AOC), which signifies that a consultant has earned AHC, CDC, and EHC certification. CDCs are trained to understand only requirements of doors and frames. Retain second or third option in subparagraph below if Project includes electrified door hardware.

1.For door hardware, an [Architectural Hardware Consultant (AHC)] [Architectural Hardware Consultant (AHC) who is also an Electrified Hardware Consultant (EHC)] [Architectural Openings Consultant (AOC)].

C.Source Limitations: Obtain each type of door hardware from a single manufacturer as listed for continuity of design and consideration of warranty.

Retain subparagraph below if applicable.

1.Provide electrified door hardware from same manufacturer as mechanical door hardware, unless otherwise indicated. Manufacturers that perform electrical modifications and that are listed by a testing and inspecting agency acceptable to authorities having jurisdiction are acceptable.

Retain first paragraph below if applicable. Revise to allow neutral pressure testing if required and as acceptable to authorities having jurisdiction.

D.Fire-Rated Door Assemblies: Where fire-rated door assemblies are indicated, provide door hardware rated for use in assemblies complying with NFPA 80 that are listed and labeled by a qualified testing agency, for fire-protection ratings indicated, based on testing at positive pressure according to NFPA 252 or UL 10C, unless otherwise indicated.

Retain first paragraph below if required. The International Building Code requires fire door assemblies to comply with smoke- and draft-control requirements in corridors, smoke barriers, and smoke partitions.

E.Smoke- and Draft-Control Door Assemblies: Where smoke- and draft-control door assemblies are required, provide door hardware that meet requirements of assemblies tested according to UL 1784 and installed in compliance with NFPA 105.

Retain air leakage rate in subparagraph below or revise to suit Project.

1.Air Leakage Rate: Maximum air leakage of 0.3 cfm/sq. ft. (3 cu. m per minute/sq. m) at the tested pressure differential of 0.3-inch wg (75 Pa) of water.

F.Electrified Door Hardware: Listed and labeled as defined in NFPA 70, Article 100, by a testing agency acceptable to authorities having jurisdiction.

Verify accessibility requirements of authorities having jurisdiction. Some projects may require compliance with multiple accessibility regulations.

G.Means of Egress Doors: Latches do not require more than 15 lbf (67 N) to release the latch. Locks do not require use of a key, tool, or special knowledge for operation.

H.Accessibility Requirements: Comply with applicable provisions in [the DOJ's 2010 ADA Standards for Accessible Design] [the ABA Standards of the Federal agency having jurisdiction] [and] [ICC A117.1] <Insert requirements> for door hardware on doors in an accessible route.

1.Provide operating devices that do not require tight grasping, pinching, or twisting of the wrist and that operate with a force of not more than 5 lbf (22.2 N).

2.Comply with the following maximum opening-force requirements:

a.Interior, Non-Fire-Rated Hinged Doors: 5 lbf (22.2 N) applied perpendicular to door.

b.Sliding or Folding Doors: 5 lbf (22.2 N) applied parallel to door at latch.

c.Fire Doors: Minimum opening force allowable by authorities having jurisdiction.

3.Bevel raised thresholds with a slope of not more than 1:2. Provide thresholds not more than [1/2 inch (13 mm) high] [and] [3/4 inch (19 mm) high for exterior sliding doors].

4.Closers: Adjust door closer sweep periods so that, from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum.

5.Spring Hinges: Adjust door spring hinges so that, from an open position of 70 degrees, the time required to move the door to the closed position is 1.5 seconds minimum.

Retain first paragraph below if keying is extensive or complex. Revise to identify additional participants.

I.Keying Conference: Conduct conference at Project site to comply with requirements in Section 013100 "Project Management and Coordination." In addition to Owner[, Construction Manager,] Contractor, and Architect, conference participants shall also include Installer's Architectural Hardware Consultant[ and Owner's security consultant]. Incorporate keying conference decisions into final keying schedule after reviewing door hardware keying system including, but not limited to, the following:

1.Function of building, flow of traffic, purpose of each area, degree of security required, and plans for future expansion.

2.Preliminary key system schematic diagram.

3.Requirements for key control system.

4.Requirements for access control.

5.Address for delivery of keys.

6.<Insert requirements to suit Project>.

Retain paragraph below if Work of this Section is extensive or complex enough to justify a preinstallation conference.

J.Preinstallation Conference: Conduct conference at [Project site] <Insert location>.

Retain subparagraphs below if additional requirements are necessary; include information about conference.

1.Review and finalize construction schedule and verify availability of materials, Installer's personnel, equipment, and facilities needed to make progress and avoid delays.

2.Inspect and discuss preparatory work performed by other trades.

Retain first two subparagraphs below for electrified door hardware.

3.Inspect and discuss electrical roughing-in for electrified door hardware.

4.Review sequence of operation for each type of electrified door hardware.

Coordinate first subparagraph below with Section 014000 "Quality Requirements" and with "Field Quality Control" Article in this Section. Revise requirements to suit Project.

5.Review required testing, inspecting, and certifying procedures.

6.<Insert agenda items>.

1.9DELIVERY, STORAGE, AND HANDLING

A.Inventory door hardware on receipt and provide secure lock-up for door hardware delivered to Project site.

B.Tag each item or package separately with identification coordinated with the final door hardware schedule, and include installation instructions, templates, and necessary fasteners with each item or package.

Retain one of two paragraphs below or revise to suit Project. Retain second paragraph for high-security cylinders.

C.Deliver keys to manufacturer of key control system for subsequent delivery to Owner.

D.Deliver keys[ and permanent cores] to Owner by registered mail or overnight package service.

1.10COORDINATION

Retain first paragraph below if floor-recessed door hardware (e.g., pivots and closers) is required.

A.Coordinate layout and installation of floor-recessed door hardware with floor construction. Cast anchoring inserts into concrete.

Retain first paragraph below for factory-prepared doors and frames.

B.Installation Templates: Distribute for doors, frames, and other work specified to be factory prepared. Check Shop Drawings of other work to confirm that adequate provisions are made for locating and installing door hardware to comply with indicated requirements.

C.Security: Coordinate installation of door hardware, keying, and access control with Owner's security consultant.

D.Electrical System Roughing-In: Coordinate layout and installation of electrified door hardware with connections to power supplies and building safety and security systems.

E.Existing Openings: Where hardware components are scheduled for application to existing construction or where modifications to existing door hardware are required, field verify existing conditions and coordinate installation of door hardware to suit opening conditions and to provide proper door operation.

1.11WARRANTY

When warranties are required, verify with Owner's counsel that special warranties stated in this article are not less than remedies available to Owner under prevailing local laws.

A.Special Warranty: Manufacturer's standard form in which manufacturer agrees to repair or replace components of door hardware that fail in materials or workmanship within specified warranty period.

1.Failures include, but are not limited to, the following:

a.Structural failures including excessive deflection, cracking, or breakage.

b.Faulty operation of doors and door hardware.

c.Deterioration of metals, metal finishes, and other materials beyond normal weathering and use.

Verify available warranties and warranty periods for door hardware with manufacturers listed in Part 2 articles.

2.Warranty Period: [Three] <Insert number> years from date of Substantial Completion, unless otherwise indicated.

Retain applicable subparagraphs below.

a.[Electromagnetic] [and] [Delayed-Egress] Locks: 1 year from date of Substantial Completion.

b.Locks: Lifetime of building.

c.Exit Devices: Lifetime of building.

d.Manual Closers: Lifetime of building.

e.Concealed Floor Closers: 10 years from date of Substantial Completion.

1.12MAINTENANCE SERVICE

A.Maintenance Tools and Instructions: Furnish a complete set of specialized tools and maintenance instructions for Owner's continued adjustment, maintenance, and removal and replacement of door hardware.

Retain paragraph below if maintenance service is needed. If retaining, revise starting date to suit Project.

B.Maintenance Service: Beginning at Substantial Completion, provide [six] <Insert number> months' full maintenance by skilled employees of door hardware Installer. Include quarterly preventive maintenance, repair or replacement of worn or defective components, lubrication, cleaning, and adjusting as required for proper door and door hardware operation. Provide parts and supplies that are the same as those used in the manufacture and installation of original products.

  1   2   3   4   5   6

Share in:

Related:

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section iconThis Product MasterSpec Section modifies the original MasterSpec...




manual


When copying material provide a link © 2017
contacts
manual-guide.com
search