Technical Specifications: Appendix N2

3.4.American National Standards Institute

• 
  B16.1 Cast Iron Pipe Flanges and Flanged Fittings
  
• 
  B16.5 Steel Pipe, Flanges, and Fittings
  
• 
  B16.34 Steel Valves
  
• 
  B30.17 Overhead and Gantry Cranes
  
• 
  B133.8 Gas Turbine Installation Sound Emissions
  
• 
  C2 National Electrical Safety Code
  
• 
  C37.010 Application Guide for AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  
• 
  C37.04 Standard Rating Structure for AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  
• 
  C37.06 Switchgear   AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis  Preferred Ratings and Related Required Capabilities
  
• 
  C37.13 Standard for low Voltage AC Power Circuit Breakers Used in Enclosures
  
• 
  C37.20.1 Standard for Metal Enclosed Low Voltage Power Circuit Breaker Switchgear
  
• 
  C37.20.2 Standard Metal Clad and Station Type Cubicle Switchgear
  
• 
  C37.23 Guide for Metal Enclosed Bus and Calculating Losses in Isolated Phase Bus
  
• 
  C37.30 Definitions and Requirements for High Voltage Air Switches, Insulators, and Bus Supports
  
• 
  C50.41 Polyphase Induction Motors for Power Generating Stations
  
• 
  C57.12.10 Transformers   230 kV and below, 833/958 through 8,333/110,417 kVA Single Phase and 750/862 through 60,000/80,000/100,000 kVA Three Phase without Load Tap C Changing, and 3,750/4,682 through 60,000/80,000/100,000 kVA With Load Tap Changing  Safety Requirements
  
• 
  C57.12.55 Transformers   Dry Type Transformers Used in Unit Installation, Including Unit Substations
  
• 
  C57.12.70 Terminal Markings and Connections for Distribution and Power Transformers
  
• 
  C57.13 Standard Requirements for Instrument Transformers
  
• 
  C57.109 Guide for Transformer Through Fault Current Duration
  
• 
  C62.11 Standard for Metal Oxide Surge Arresters for AC Power Circuits
  

3.5.Industry Standards

• 
  American Association of State Highway and Transportation Officials (AASHTO)
  
• 
  American Boiler Manufacturers Association (ABMA)
  
• 
  American Concrete Institute (ACI)
  
• 
  American Gas Association (AGA)
  
• 
  American Gear Manufacturers Association (AGMA)
  
• 
  American Institute of Steel Construction (AISC)
  
• 
  American Iron and Steel Institute (AISI)
  
• 
  Air Moving and Conditioning Association (AMCA)
  
• 
  American National Standards Institute (ANSI)
  
• 
  American Petroleum Institute (API)
  
• 
  American Society for Nondestructive Testing (ASNT)
  
• 
  American Society for Testing and Materials (ASTM)
  
• 
  American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE)
  
• 
  American Water Works Association (AWWA)
  
• 
  American Welding Society (AWS)
  
• 
  Anti Friction Bearing Manufacturers Association (AFBMA)
  
• 
  Crane Equipment Manufacturer’s Association of America (CMMA)
  
• 
  Expansion Joint Manufactures Association (EJMA)
  
• 
  Fluid Control Institute (FCI)
  
• 
  Heat Exchange Institute (HEI)
  
• 
  Hydraulic Institute (HI)   Standard for Pumps
  
• 
  Illuminating Engineering Society (IES)
  
• 
  Institute of Electrical and Electronics Engineers (IEEE)
  
• 
  Insulated Cable Engineers Association (ICEA)
  
• 
  Instrument Society of America (ISA)
  
• 
  Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry
  
• 
  Metal Building Manufacturers Association (MBMA)
  
• 
  National Association of Corrosion Engineers (NACE)
  
• 
  National Electrical Manufacturers Association (NEMA)
  
• 
  National Fire Protection Association (NFPA) National Fire Codes
  
• 
  Pipe Fabrication Institute (PFI)
  
• 
  Sheet Metal and Air Conditioning Contractors National Association (SMACNA)
  
• 
  Steel Structures Painting Council (SSPC)
  
• 
  Thermal Insulation Manufacturers Association (TIMA)
  
• 
  Tubular Exchanger Manufacturers Association (TEMA)
  
• 
  Underwriters Laboratories, Inc. (UL) - fire protection equipment only
  
• 
  Welding Research Council (WRC)