Install the battery pack if it has not been installed in your computer.
Carefully place the computer upside down.
Make sure that the battery security lock is in the unlock（ ）position.
Fit the battery pack into its compartment () and slide the security lock to the lock （ ）position ().
IMPORTANT: Before turning on your computer for the first time, make sure you use the AC adapter to fully charge the battery pack by performing the following steps.
Plug the DC cord of the AC adapter to the power connector on the computer ().
Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ().
The Battery Charge Indicator（ ）on the computer glows amber to indicate that charging is in progress. When the battery is fully charged, the Battery Charge Indicator glows green. This may take a couple of hours.
After charging, you may now turn on your computer.
Open the top cover by sliding the cover latch toward the right () and lifting up the cover ().
Press the power button to power up. The operating system such as Windows should start.
For complete information, please refer to the User’s Manual (in PDF format) supplied on the Driver CD.
Press the eject button of the DVD drive. Fit the Driver CD in the tray with its label facing up. Then, press the eject button or manually slide the tray back into place.
When the main screen appears, click the Adobe® Acrobat Reader® icon to install the software for opening the PDF manual file. Then, click the manual icon and select a specific language to view.