Technical specifications for isdn epabx system
Download 389.89 Kb.
|
| TENDER DOCUMENT TECHNICAL SPECIFICATIONS FOR ISDN EPABX SYSTEM TECHNICAL SPECIFICATIONS FOR ISDN EPABX SYSTEM INDEX
SCOPE OF WORK FOR ISDN EPABX SYSTEM SECTION – 1 SCOPE OF WORK 1. INTRODUCTION CDRI has taken up a project for Construction of new Campus at Sitapur Road, Lucknow. This portion of tender is for works related to supply, installation, testing & commissioning of ISDN EPABX System (main) with wired capacity of 1200 ports (analog & digital extensions), PRI lines, .BRI ports to be installed in administration building and EPABX system with wired capacity of 100 ports in guest house building for new CDRI campus at Lucknow. 2. SCOPE OF WORK In general the works to be performed under this contract shall comprise of : ( i ) Design, engineering, manufacture, inspection & testing, supply, transportation to site, storage, installation, system integration, testing & commissioning of the following items with all required accessories. (a) ISDN EPABX System (main) in administration building.
( c) Telephone sets The bidder shall be responsible for engineering and providing all materials, equipment and services specified or otherwise, which are required to fulfill the intent of ensuring operability, maintainability, completeness and reliability of the total work. Item wise bill of quantity (BOQ) indicated in price schedule is based on which work shall be executed. Any other equipment, material, component, accessories which are not specifically mentioned in price bid and technical specification but necessary for satisfactory installation and trouble free operational and maintenance of the equipment / system adopting good engineering practice shall be in the scope. The offered equipment shall be new, employing proven and established latest technology suitable for Indian conditions. ( ii ) Providing complete design, engineering data, BOQ, detailed drawings, schemes, commissioning procedure, O&M manuals, catalogue, reference documents etc. for EPI/CDRI ‘s review/reference / records in requisite sets of hard copy and soft copy. ( iii ) Installation, testing & integrated commissioning of the complete system ( iv ) Execution of works shall be as per tender conditions & technical specification, relevant applicable IS, ITD/DoT requirements code of practice in conformity with the Indian Electricity Act , 1910 and the Indian Electricity rules 2005 amended up to date, CPWD specifications for Electrical works Part - I (internal) 2005, Part -II (External) 1994, Part IV as amended up to date of receipt of tender, CDRI requirement and requirements of the Local Electricity supply authority and other regulations and safety codes in the locality where the equipment will be installed. ( v ) Ensuring interlocking/integration/interconnection among various equipment/system, earthing of equipment and safety aspects as per the requirements. ( vi ) All Statutory approvals / license for the equipment(s) / system(s) shall be obtained by the successful bidder as needed including approval of relevant drawings, approval for the entire installation and after completion of work, as per the approved drawings. Cost for obtaining such approvals from statutory authority/DoT/TEC shall be borne by the bidder. ( vii ) Effective co-ordination with the other agencies to carry out the work smoothly. ( viii ) Proper handing over of the installations in satisfactory working conditions along with required as built drawings, documents, maintenance tools /tackles and items as specified in the tender. ( ix ) The work shall also include all incidental job connected with the installation of equipments. ( x ) All the equipment except battery shall be designed considering 45 C as ambient temperature. Battery shall be designed considering minimum ambient temperature (5C). Where equipment are installed outside and exposed to direct sun-rays, rigorous weather conditions under which they are required to operate shall be taken into consideration. ( xi ) Any work like chipping/breaking of existing structure like walls, floors, fabrications etc. with prior approval of the EPI/CDRI’s representative. ( xii ) In case any existing structure is affected/damaged due to the installation work, the repairing to the same shall be done to the satisfaction of the EPI/CDRI’s representative without any extra cost. ( xiii ) Any modifications/rework required on account of wrong practices shall be done without any extra cost.
|
Share in:
