  
TECHNICAL SPECIFICATIONS SECURITY SYSTEM
DIVISION 13 - SPECIAL CONSTRUCTION
SECTION 137_ _ - SECURITY CCTV SYSTEM
PART 2 - PRODUCTS
2.01 GENERAL
A. All equipment and materials used shall be standard components, regularly manufactured, regularly utilized in the manufacturer’s system.
B. All systems and components shall have been thoroughly tested and proven in actual use.
C. All systems and components shall be provided with the availability of a toll free 24-hour technical support phone number from the manufacturer. The phone number shall allow for immediate technical assistance for either the dealer/installer or the end user at no charge.
D. All systems and components shall be provided with an explicit manufacturer warranty.
COMPACT CAMERA DOME SYSTEM
A. The motorized dome shall have internal CPU-circuitry and provision for external programming via standard RS-422/485 protocol or enhanced VicoaxII protocol. Options for TCP/IP, fiber optic and twisted pair (UTP) video transmission shall be available. This circuitry shall provide for an external power supply input, four alarm inputs, one relay output and communications wiring.
B. Alarm inputs shall be individually programmable for their functional state (enabled or disabled), reporting
state (report on or off), active state (high or low), acknowledge mode (manual, momentary or automatic),
automatic acknowledge dwell time control, set and reset action (action when triggered or reset) and
displayed title text. The relay output shall be programmable for its power-on state (on or off), output type
(momentary or latching) and displayed title text.
C. Programmable titling shall be provided for the camera and every preset position, alarm, relay, and sector.
Titles shall be enabled or disabled individually or globally. The overall position of the titles and display
frame position shall be programmable. The capability to fade titles after a programmable time shall be
provided.
D. There shall be 79 programmable preset positions available, each having a variable preset solve speed of 1 sec (nominal) and accuracy of 0.23°. The dome’s 360 degree view shall be programmable for a maximum of 16 sectors. Each sector shall have the capability to be blanked out (no video display). The number and size of sectors shall be programmable and have a custom title.
There shall be eight (4 on 18X) tours available with 32 steps per tour. Tour steps shall include preset
positions with speed control, relay control, alarm acknowledge, save/recall camera status, repeat tour, call another tour, call an autotour and dwell timing control. There shall be two autotours (22X/23X only) available with 256 pan, tilt and zoom functions per autotour. Timing shall be dynamic or as is actually programmed with the joystick and push buttons.
F. Pan and tilt functions shall be externally controlled, continuously variable and programmable to be
enabled or disabled manual pan limits shall be programmable. There shall be an autopan feature and it shall be programmable for its functional settings (enabled, disabled speed, limits). Maximum manual pan and tilt speeds shall be programmable. Maximum pan speed shall be 360 degrees/sec (120 dps for 18X) and maximum tilt speed shall be 150 degrees/sec (90 dps for 18X). Pan and tilt speeds shall also be scalable to the zoom setting. The zoom function speed shall be externally controlled using three settings, low, medium and high.
G. There shall be three camera/lens formats available, 18X, 22X and 23X (day/night). The camera-lens module shall be a 1/4 inch, high-resolution color type (the 22X with ExView™ technology). Camera sensitivity shall be between 0.0019 fc (0.02 lux) to 0.002 fc (0.03 lux), depending on the model for 23X and 22X respectively; the 18X shall have a 0.094 fc (1.01 lux) sensitivity. The lens on the standard cameras shall have a maximum optical zoom setting of 22X and a maximum digital zoom setting of 12X for a total zoom setting of 264X and the lens on the day/night cameras shall have a maximum optical zoom setting of 23X and a maximum digital zoom setting of 12X for a total zoom setting of 276. The 18X camera shall have digital zoom of 12X for a total zoom setting of 216X. Lens focal length shall be 4-88 mm with a maximum aperture of f/1.6 for the standard cameras and 3.6-82.8 mm for the day/night cameras with a maximum aperture of f/1.6. The 18X camera shall have a focal length of 4.1-73.8 mm, f/1.4. The digital zoom shall be programmable for its functional setting (enable/disable). An autoiris function with a manual override feature and an auto-focus function with functional setting control (enable/disable) shall also be provided.
H. In addition, the camera shall provide high level, programmable functions. The autoiris and AGC (22X/23X only) shall be adjustable. The shutter speed shall be automatic or manual. The automatic shutter speed shall work with an auto exposure feature. This feature can be set to operate with a fully automatic shutter speed or a fixed, selectable, linear speed. These features are called exposure priority or shutter priority. All color cameras shall have white balance gain using red and blue scales. Backlight compensation shall be programmable for its relative setting using a tuning value scale. Video line locking shall be provided with an internal crystal clock or a programmable vertical phase scale.
I. The basic ceiling mounted version shall be designed to mount into any dropped or hard ceiling having
the capacity to support the dome’s weight. There shall be an optional mounting kit for ceilings not able
to support the dome’s weight.
J. The indoor pendant version shall be mounted using a molded thermoplastic housing and 1-1/2 inch NPT
threaded fitting. The outdoor pendant model shall be mounted using a die cast aluminum housing and 1-1/2 inch NPT threaded fitting and shall include a molded thermoplastic sunshield and additional
environmental control.
K. A real time clock and scheduler (22X/23X only) shall be available on all models. Up to 64 events shall be able to be scheduled for action at a programmed time of day. Events that may be scheduled include a preset, turning a relay on or off, enabling or disabling an alarm, and calling a tour or an autotour
L. 16 individual zoom-scalable programmable privacy masks shall be available on 22X/23X models.
M. Programmable azimuth and compass display shall be available on 22X and 23X models. The compass shall be programmed for absolute North and shall display 8 compass headings (N, NE, E, SE, S, SW, W, NW). Pan and tilt degrees shall be displayed with a 1° resolution.
N. Motion detection capability shall be available for the day/night camera. For each preset, there are 6
programmable zones for motion detection. Each zone has 3 sensitivity levels. Programmable actions may
be associated with each detection zone, including calling another preset, turning a relay on or off, and calling a tour or an autotour.
O. The capability to freeze an image during a preset solve shall be available on the day/night cameras. The
control shall be global and affect all preset solves. The freeze of an image during solve has advantages
when recording using a motion compensated recording system (DVR).
P. The capability to flip (invert) the video image shall be available on the day/night cameras. This feature is
useful when mounting units in an inverted position. All pan/tilt and compass displays are automatically
adjusted for the inverted image.
Q. Auto Baud detection shall be provided on all models operating in RS-422/RS-485 communication mode.
Baud rates supported shall be 4800, 9600 and 19,200 bps. All units shall have automatic detection and
correction of the receive polarity (commands into the dome). The polarity of the transmit signals (responses from the dome) shall be programmable.
R. Absolute position control shall be provided on all models operating in RS-422/RS-485 communication mode. Pan and tilt direct control resolution shall be to 0.125 degrees and zoom direct control resolution shall be 0.125X magnitude. The capability to adjust the target iris level shall be provided using the absolute position control feature.
S. All models shall support interfacing to selected competitors’ control systems. Selection of available competitors’ protocols shall be provided via DIP switch settings on the unit.
T. NTCIP 1103 compliant models shall be available (National Transportation Communications for ITS Protocol).
U. Multilanguage menu system shall be provided, including English, Spanish, French and Italian.
V. The camera dome system shall have the following mechanical specifications:
1. Dimensions: Indoor Ceiling
Diameter: 7.1-in. (180 mm).
Height: 9.7-in. (246 mm).
Indoor Pendant
Diameter: 8.0-in. (203 mm).
Height: 10.0-in. (254 mm).
Outdoor Pendant
Diameter: 9.0-in. (228 mm).
Height: 10.3-in. (262 mm).
Lower Dome
Diameter: 5.9-in. (150 mm).
2. Weight: Indoor Ceiling: 5.1 lb (2.3 kg).
Indoor Pendant: 4.7 lb (2.1 kg).
Outdoor Pendant: 7.7 lb (3.5 kg).
3. Construction: Plastic, aluminum and steel.
4. Color: White housing, black trim ring, gray (smoked), chrome or gold dome for the
indoor version, clear dome for the outdoor version.
W. Environmental parameters shall be: Indoor units: 32 to 132° F (0 to 55° C). Outdoor units:-29 to 165° F
(-34 to 74° C) in accordance with NEMA 2.1.5.1 STD 2; -40 to 132° F (-40 to 55° C) continuous rotation.
The camera dome system shall be Vicon Industries SurveyorVFT series.
|
