General Summary




Download 251.82 Kb.
NameGeneral Summary
page1/7
A typeDocumentation
manual-guide.com > manual > Documentation
  1   2   3   4   5   6   7





Pro-Watch® Security Management Suite

Architect and Engineering

Specifications

Release 3.80
Contents

1 General 3

1.1 Summary 3

2 Products 12

2.1 SYSTEM Software Requirements 12

2.2 Operational Requirements 26

2.3 Hardware Requirements 108

2.4 Field Controllers 108

2.5 SYSTEM Interfaces 117

3 Execution 124

3.1 Examination 124

3.2 Installation 124

3.3 Testing and Certification 124



  1. General

    1. Summary


The intent of this document is to specify the minimum criteria for the design, supply, installation, and activation of the Security Management System, hereinafter referred to as the SYSTEM, which shall be a modular and network enabled access control system. The SYSTEM shall be capable of handling large proprietary corporations with multiple remote sites, alarm monitoring, video imaging and ID badging, paging, digital video control and CCTV switching that allows for easy expansion or modification of inputs and remote control stations.
      1. References

        1. Federal Communications Commission (FCC):


  • FCC Part 15 – Radio Frequency Devices

  • FCC Part 68 – Connection of Terminal Equipment to the Telephone Network
        1. Underwriters Laboratories (UL):


  • UL294 – Access Control System Units

  • UL1076 – Proprietary Burglar Alarm Units and Systems
        1. National Fire Protection Association (NFPA):


    • NFPA70 – National Electrical Code
        1. Electronic Industries Alliance (EIA):


    • RS232C – Interface between Data Terminal Equipment and Data Communications Equipment Employing Serial Binary Data Interchange

    • RS485 – Electrical Characteristics of Generators and Receivers for use in Balanced Digital Multi-Point Systems

1.1.1.5. Federal Information Processing Standards (FIPS):

    • Advanced Encryption Standard (AES) (FIPS 197)

    • FIPS 201: Personal Identity Verification (PIV) of Federal Employees and Contractors
      1. SYSTEM Overview


The SYSTEM shall integrate access control, alarm monitoring, CCTV, digital video, ID badging and database management. A modular and network-enabled architecture shall allow maximum versatility for tailoring secure and dependable access and alarm monitoring solutions for medium and large facilities. The SYSTEM shall at a minimum include the following capabilities:

  • Direct wire operation, local area network (LAN) (Ethernet) or wide area network (WAN) operation, or remote operation via modem. When configured for dialup, any one port can support multiple dial­up locations.

  • A flexible and modular design shall provide ease of installation, robustness, reliability and expansion.

  • Distributed architecture shall allow controllers to operate independently of the host. The architecture shall place key access decisions, event/action processing and alarm monitoring functions within the controllers, eliminating degraded mode operation.

  • Communication between the server/workstations, controllers and other hardware shall be via the SYSTEM software.

  • Proprietary software programs and control logic information used to coordinate and drive system hardware shall be stored in read-only memory.

  • Upgrades to the hardware and software shall occur seamlessly without the loss of database, configurations, or historical report data.

  • Flash memory management shall support firmware updates and revisions to be downloaded to the system.

  • Both supervised and non-supervised alarm point monitoring shall be provided. Upon recognition of an alarm, the system shall be capable of switching CCTV cameras that are associated with the alarm point.

  • Manual or automatic arming or disarming alarm points shall be performed by time of day and day of week.

  • Database partitioning shall provide the option to restrict access to sensitive information by user ID.
  1   2   3   4   5   6   7

Share in:

Related:

General Summary iconGeneral summary

General Summary icon1. 0 general 1 summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconGeneral 1 summary

General Summary iconGeneral summary

General Summary iconGeneral summary

General Summary iconPart 1 General 01 Summary

General Summary iconPart 1 general summary section Includes

General Summary iconGeneral conditons related documents drawings and general provisions...

General Summary iconI. general a. Related documents drawings and general provisions of...

General Summary iconVolume I compilation of general comments and general recommendations...

General Summary iconA. Drawings and general provisions of the Contract, including General...

General Summary iconDrawings and general provisions of the Contract, including General...

General Summary iconDrawings and general provisions of the Contract, including General...




manual




When copying material provide a link © 2017
contacts
manual-guide.com
search