|TurboChef Technologies Inc.|
Oven Placement Near Open Heat Source
When placing a TurboChef oven near an open heat source, strictly adhere to the following:
Verify oven location has a minimum 6 clearance on top and minimum 2 of clearance on each side in accordance with the Owner’s Manual.
If the oven is being placed near a grill or stove, there must be a divider between the oven and the open heat source, with a minimum of 6 between the oven and the divider.
If the oven is being placed near a fryer, there must be a divider between the oven and a fryer, with a minimum of 12 between the oven and the divider.
The height of the divider must be greater than or equal to the height of the oven:
C3 = 25.5
NGC = 23
HHB = 20.5
Oven shown in this example is NGC model (Height = 23)
L Accelerating the World of Cooking TM
ast Updated 06/05/06
P/N DOC-1024 (A)