This document can and should be edited to suit project requirements. Editing notes are included as hidden text. They can be revealed or hidden by one of the following methods

Download 72.45 Kb.

Name	This document can and should be edited to suit project requirements. Editing notes are included as hidden text. They can be revealed or hidden by one of the following methods
page	1/5
A type	Documentation

manual-guide.com > manual > Documentation

1 2 3 4 5

CSI/AIA Specifications ELECTRICITY METERING SECTION 26 27 13

Leviton Manufacturing Co., Inc.
201 N Service Rd
Melville, NY 11747-3138
Phone: 1.800.323.8290
Fax: 1.800.832.9538

SECTION 26 27 13

ELECTRICITY METERING

SECTION 26 16 00

MEDIUM-VOLTAGE METERING

Leviton IMS Series 1000 / 2000 Meters

This specification is dated May 1, 2011. It replaces any and all previous IMS Series 1000 / 2000 Meters specifications.

This document can and should be edited to suit project requirements. Editing notes are included as HIDDEN TEXT. They can be revealed or hidden by one of the following methods:

To display hidden text in Word 2010 documents: Click the File tab. The Backstage view appears. Under Help, click Options. The Options dialog appears. Click Display and select Hidden Text.

To print hidden text in Word 2010 documents: Click the Microsoft Word button. Then click the Word tab. Then click the Options button. The Word Options dialog opens. Click the Display tab in the left pane. Check the Print hidden text checkbox under Printing Options in the right pane of the Word Options dialog.

In older versions of Microsoft Word: From the pull-down menus select TOOLS, then OPTIONS. Under the tab labeled VIEW, select or deselect the HIDDEN TEXT option.

To print a copy of the specification that includes the HIDDEN TEXT, (1) Select “Print” (2) Select “Options” (3a) Check the box to print HIDDEN TEXT (3b) Uncheck the box to not print HIDDEN TEXT.

NOTE TO SPECIFIER: This product specification section specifies the furnishing, installation and connection of an electric metering system installed on electrical equipment such as low voltage switchgear, switchboards, distribution panels and/or branch circuit panelboards of the power system. Leviton’s IMS Series 1000 / 2000 Meters meet all specifications herein. Include Leviton Manufacturing Co., Inc., either as sole manufacturer or in list of manufacturers.

as either sole manufacturer or in list of manufacturers.

If necessary, revise the product specification section number and title to suit project requirements, specification practices, and section content. Leviton publishes AIA / CSI specifications with both old (1995) and new (2004) section numbers.

While editing this specification, take note of the following:

This document is designed for “delete-only” editing. Some paragraphs require that you select among two or more options. The optional text is bracketed: e.g.: “Section [09000.] [_____.]" If your draft copy includes the “[“ or “]” characters, it almost certainly includes too many options. Use Find to locate these sections and edit appropriately.

Occasionally, options include entire paragraphs. Rather than use brackets, the document separates these optional paragraphs an "OR" statement, e.g.:

*** EITHER ***

Option A

**** OR ****

Option B

As with brackets, your final specification should not contain any *** OR *** notes between paragraphs.

If you need more information on an organization whose standards are referenced within this document text, click on the hyperlink provided.

GENERAL

1.1SUMMARY

A.Section Includes:

1.The furnishing, installation and connection of an electric metering system installed on electrical equipment such as low voltage switchgear, switchboards, distribution panels and/or branch circuit panelboards of the power system.

B.Related Sections:

NOTE TO SPECIFIER: Edit the list of Related Sections to refer to the actual sections included in your Project Manual.

1.Section [26 24 13 – Switchboards]

2.Section [01 91 01] [01 91 02] – [Commissioning Process]

3.Section [13 05 41] — [Seismic Restraint Requirements For Non-Structural Components]: Requirements for seismic restraint of nonstructural components.

4.Section [26 05 11] [Requirements For Electrical Installations] — General electrical requirements and items that are common to more than one section of Division 26.

5.Section [26 05 21] [Low-Voltage Electrical Power Conductors And Cables (600 Volts And Below)] — Low voltage cable.

6.Section [26 05 33] [Raceway And Boxes For Electrical Systems] — Conduits and outlet boxes.

7.Section [26 23 00] [Low-Voltage Switchgear] — Secondary distribution switchgear.

8.Section [26 24 11] [Distribution Switchboards] — Secondary distribution switchboards.

NOTE TO SPECIFIER: Standards that are not applicable can be deleted.