Download 40.87 Kb.
Presseinformation / Press Release
Autor / Author: Martin Dänhardt Nr. / No.: 17-078-R
Rückfragen / Enquiries: Martin Dänhardt Datum / Date: 05.12.2017
Telefon / Phone: +49 351 833-2580 E-Mail: firstname.lastname@example.org
Sperrvermerk / Release: Zeichen / Ref.: BX/Dä
Bilder / Photographs: 11 Seiten / Pages: 5
Print & Postpress Innovation Days in Radebeul
World record: Rotary die-cutting at 17,000 sheets per hour
Integrated workflows, autonomous printing and new measuring systems live
Practice-oriented demonstrations of commercial and packaging printing
Rotary die-cutting with up to four process steps in a single machine pass
Fastest makeready for print and finishing
Between 29th November and 1st December, KBA-Sheetfed invited international print and finishing specialists to a series of Print & Postpress Innovation Days at the company’s facility in Radebeul near Dresden. Over 250 participants from 30 countries took the opportunity to gather information on the latest automation solutions for commercial, label and packaging printing, as well as innovative postpress solutions.
Ralf Sammeck, CEO of KBA-Sheetfed and member of the executive board of Koenig & Bauer AG, welcomed the guests with a highly informative opening address, during which he spotlighted both the group’s new brand image and the future visions of Koenig & Bauer. Sascha Fischer, head of product management, then spoke in more detail about the further development of innovative solutions for an increasingly automated printing process.
That already begins with a new generation of plate changers with significantly reduced change times in half, medium and large formats, alongside the ability to load plates without prior bending of the rear edges. New measuring system options such as Print Check and PDF Check make use of a single, common camera system and guarantee absolute inspection and control precision. LED-UV dryers for Rapida sheetfed offset presses are now manufactured by KBA-Sheetfed itself, are even more finely adapted to the Rapida press series and thus offer even greater drying performance across all format classes, including also large formats. Autonomous printing with ErgoTronic AutoRun is about to be raised to a new level. “The future belongs to AutoPrint,” said Sascha Fischer – not least because the system will soon be able to program a complete job changeover itself, without any need for operator input. And the Rapida LiveApp, finally, is already in practical use in the field, with a further expanded scope of features: The info panel with press status display and print job information, the maintenance manager and the consumables tracking module have been complemented with stock management controls and PressCall Mobile, a communication tool with chat functions for service and operator support purposes.
High performance and automation in practice
During the subsequent practical session, Dirk Winkler, head of print technology, demonstrated the printing of labels and folding cartons on a six-colour Rapida 106 coater press with reel sheeter and a Vinfoil Micro cold foil module. The focus of his presentations was placed on the benefits of low-migration LED-UV production, the simple flexibility to incorporate cold foil application, and high-speed production at 20,000 sheets per hour both on reel-fed IML film and on cardboard and self-adhesive label substrates from a pile.
On two eight-colour perfector presses for 4-over-4 production with subsequent coating, Winkler and Fischer provided impressive proof of the performance capabilities of the Rapida technology in commercial printing with conventional and LED-UV inks. The conventional press ran six sections of the latest customer magazine Koenig & Bauer Report, with fully automatic management of the entire job sequence by ErgoTronic AutoRun. As soon as the defined run length was reached – in this case 500 sheets – the next makeready process began automatically. PrintCheck and PDFCheck provided for continuous quality monitoring.
The LED-UV press produced six sections of the new Koenig & Bauer image brochure and, to conclude, a pencil box on folding carton board. Here, too, job changes were initiated automatically once the run length was reached, and the press subsequently returned to production without manual intervention. It was only the necessary substrate change for the last job which required manual intervention on the part of the operator.
Ultimate die-cutting performance
Under the claim “Ready for the next step”, Mario Gerber, senior sales manager for postpress solutions, introduced the rotary die-cutter Rapida RDC 106 as a “game-changer for the die-cutting process”. He explained the design features which are shared with a Rapida printing press and the various process steps which can be implemented in the individual towers. These range from die-cutting and hole punching for in-mould and other label applications, via embossing, creasing, cutting and stripping for the processing of packaging products, through to tailored variants for commercial users. The machines offer cutting outputs of up to 15,000 sheets per hour, depending on the substrate and the required contours, and can thus match the speed of a modern sheetfed-offset press. Productivity is increased by up to 300 per cent for label applications, and folding carton producers can also look forward to a 65 per cent increase in efficiency.
The visitors were able to witness this superlative die-cutting performance for themselves during practical demonstrations on two Rapida RDC 106 rotary die-cutters. The four-unit machine began with a job requiring the creasing, cutting and stripping of a folding carton for pharmaceuticals. At the end of production, the machine was converted within just a few minutes for a completely different job, namely the pencil box printed during the morning session. Subsequent blanking was done offline on a Master Blanker from Laserck with a throughput of up to 20,000 sheets per hour.
The single-unit Rapida RDC 106 rounded off the day by processing the in‑mould and self-adhesive labels which had been printed on the six-colour Rapida 106 with coater and cold foil module. Despite the tricky job change from classic die-cutting to kiss-cutting, the machine was back in production in next to no time. As the final highlight of the show, the Rapida RDC 106 then ran the self-adhesive label production at the world record speed of 17,000 sheets per hour.
International exchanges of experience
Partner companies Wink and Esko accompanied the event with specialist information on cutting plates and process-integrated workflows for packaging production. There were similarly plenty of opportunities to talk shop and discuss experiences with fellow users from other countries and even continents.
Ralf Sammeck, CEO of KBA-Sheetfed and member of the executive board of Koenig & Bauer AG, invited the international guests to learn more about the company’s new offers, products and technologies for commercial and label printers
Sascha Fischer, head of product management, presented a host of new automation and measuring system features, including faster plate changing, expanded functionality for the Rapida LiveApp, further content serving autonomous printing and new LED-UV dryers
First presentation highlight on a six-colour Rapida 106 coater press with inline cold foil module and reel sheeter: Reel-fed printing of in-mould labels at 15,000 sheets per hour, and then fast conversion to different substrates from a pile (in photo)
Subsequently, the press ran both self-adhesive labels and board at 20,000 sheets per hour
Dirk Winkler (front) and Sascha Fischer presented autonomous printing with ErgoTronic AutoRun on two eight-colour Rapida 106 perfector presses for 4‑over-4 production with subsequent coating: A series of six product sections was printed with automated makeready on a conventional and an LED-UV press
Under the claim “Ready for the next step!”, Mario Gerber spotlighted some of the unique benefits of the Rapida RDC 106, such as ultrafast makeready and unrivalled production speeds
Postpress specialists Johannes Helbig and Mario Gerber during their joint presentation of two Rapida RDC 106 rotary die-cutters for different fields of application
World record: Die-cutting at 17,000 sheets per hour
The printing and die-cutting results – here with an IML film – met with great interest from the attending specialists
One of products processed on the four-unit Rapida RDC 106: The sheets with the pencil boxes were embossed, creased, cut and stripped in a single machine pass
Blanking of the in-mould labels using the Laserck Master Blanker